42
In the menu screen:
F p ress the INFO button to select
"REINITIALISE" (located in menu 2/3 or
3/3 depending on the instrument panel) :
Reinitialising the under-inflation
detection system (REINITIALISE)
You must reinitialise the under-inflation
detection system after adjusting one or more
tyre pressures or replacing one or more
wheels.
F
p
ress and hold the INFO button for at least
3 seconds .
ther
e is an audible signal and the under-
inflation warning lamp flashes slowly until
reinitialisation is complete.
In the menu screen:
F
p
ress the INFO button to select the current
fuel consumption activation / deactivation
symbol (located in menu 2/3) :Activation / deactivation of the
current fuel consumption*
You can activate or deactivate the display of
the current fuel consumption, with the type 2
instrument panel only.
F
p
ress and hold the INFO button for a few
seconds to scroll through the choices in
succession (ON, OFF).
* Depending on equipment.
In the menu screen:
F p ress the INFO button to select sound 1
or
2 (located in menu 2/3) :
Selection of the sound for the
direction indicators
You can select the sound for the direction
indicators, with the type 2 instrument panel only.
Monitoring
89
Rear screen demist - defrost
Switching on
the rear screen demisting/defrosting can only
operate when the engine is running.
Switching off
the demisting/defrosting switches off
automatically to prevent an excessive
consumption of current.
F
I
t is possible to stop the demisting/
defrosting operation before it is switched
off automatically by pressing the button
again.
t
h
e indicator lamp associated with
the button goes off.
F
S
witch off the demisting/defrosting of the
rear screen and door mirrors as soon as
appropriate, as lower current consumption
results in reduced fuel consumption.
th
e control button is located on the air conditioning system control panel.
F
P
ress this button to demist /defrost
the rear screen and (depending
on version) the door mirrors.
t
h
e
indicator lamp associated with the
button comes on.
3
Comfort
104
gear shift indicator*System which reduces fuel consumption by advising the driver to change gear on vehicles fitted with a manual gearbox.
Operation
* Depending on engine.-
f
or a change up,
In the case of driving which makes
particular demands on the performance
of the engine (firm pressure on the
accelerator pedal, for example, when
overtaking...), the system will not
recommend a gear change.
the
system never suggests engaging
reverse gear.
the
system intervenes only when driving
economically.
Depending on the driving situation and your
vehicle's equipment, the system may advise
you to skip one or more gears. You can
follow this instruction without engaging the
intermediate gears.
th
e gear recommendations should not
be considered compulsory. In fact, the
configuration of the road, the amount of traffic
and safety remain determining factors when
choosing the best gear. t
her
efore, the driver
remains responsible for deciding whether or not
to follow the advice given by the system.
th
is function cannot be deactivated. A symbol appears in the instrument panel
when the system suggests changing to a more
suitable gear:
or
-
f
or a change down.
Driving
111
Stop & Start (Auto Stop & go) function
Operation
Going into engine STOP mode
the "AS &G" warning lamp comes on in
the instrument panel or the instrument
panel screen and the engine goes into
standby after a few seconds:
-
w
ith a manual gearbox , with the vehicle
stationary and your foot on the brake, when
you put the gear lever into neutral and
release the clutch pedal.
Never refuel with the engine in
S
tO
P mode; you must switch off the
ignition with the key or the S
tA
R
t/
St
OP
button.
When the engine is stopped
automatically, the operation of certain
vehicle systems, such as for example,
braking, power steering... are modified.
Ta k e c a r e
.
Special cases: STOP mode not
available
StOP mode is not invoked when:
-
t he driver's seat belt is not fastened,
-
t
he driver's door is open,
-
t
he bonnet is open,
-
t
he minimum time period of 30 seconds
since starting the engine has not elapsed,
-
t
he vehicle has not exceeded 3 mph
(5
km/h) since the last engine start,
-
t
he vehicle has restarted less than
10
seconds ago,
-
t
he engine is needed to maintain a
comfortable temperature in the passenger
compartment,
-
d
emisting is active,
-
s
ome special conditions (battery charge,
engine temperature, braking assistance,
ambient temperature...) where the engine is
needed to assure control of a system,
-
the "AS &G" warning lamp is
flashing in the instrument panel.
This operation is perfectly normal.
th
e Stop & Start (Auto Stop &
g
o
) function puts the engine temporarily into standby during stops in the traffic (red lights, traffic jams, or other...).
th
e engine restarts automatically as soon as you want to move off.
t
h
e restart takes place instantly, quickly and silently.
Per fect for urban use, the Stop & Start (Auto Stop &
g
o
) function reduces fuel consumption and exhaust emissions as well as the noise level when
stationary.
If you move the gear lever, the "AS &G"
warning lamp flashes, accompanied by
an audible signal.
th
e alert stops as soon as the gear
lever is returned to the neutral position.
4
Driving
114
the tyre under-inflation detection
system is an aid to driving which does
not replace the need for vigilance on
the part of the driver.
Under-inflation detection
System which continuously and automatically checks the pressures of the four tyres after switching on the ignition.
A pressure sensor is located in the valve of each tyre (except the spare wheel).
th
e system triggers an alert if a drop in pressure is detected in one or more tyres, compared to the reference pressure registered in the system.
th
is reference pressure must be reinitialised every time the tyre pressures are adjusted or a wheel changed.
th
e system operates on condition that sensor identifiers have first been memorised in the system by a P
e
uge
Ot
dealer or a qualified workshop.
You can memorise two sets of tyres (for example: wheels with "standard" tyres and wheels with "winter" tyres).
Driving with under-inflated tyres
increases fuel consumption.
th
is system does not avoid the need
to check the tyre pressures regularly
(including the spare wheel) and before
a long journey.
Driving with under-inflated tyres
adversely affects road holding,
extends braking distances and causes
premature tyre wear, particularly under
arduous conditions (vehicle loaded,
high speed, long journey).
th
e tyre pressures for your vehicle can
be found on the tyre pressure label
(see the "Identification markings"
section).
th
e tyre pressures must be checked
when the tyres cold (vehicle stopped
for 1 hour or after driving for less then
6 miles (10 km) at moderate speed).
Other wise, add 0.3 bar to the values
indicated on the label.
Driving
235
Identification markingsVarious visible markings for the identification and tracing of your vehicle.
A.
M
anufacturer's plate.
I
t is riveted to the middle pillar, right hand
side and carries the following information:
-
t
he name of the manufacturer,
-
t
he e
u
ropean whole vehicle type
approval number,
-
t
he vehicle identification number (VIN),
-
t
he maximum authorised vehicle weight
(gross vehicle weight),
-
t
he maximum authorised weight of
vehicle + trailer (gross train weight),
-
t
he maximum front axle weight,
-
t
he maximum rear axle weight.
th
e tyre pressures must be checked
when the tyres are cold, at least once
a month.
If the tyre pressures are too low, this
increases fuel consumption.
B.
T
yre label.
I
t is fixed to the middle pillar, driver's side
and carries the following information:
-
t
he tyre sizes,
-
t
he tyre pressures.C.
V
ehicle identification number (VIN)
under the bonnet.
t
h
is number is engraved on the body near
the damper support.
D.
V
ehicle identification number (VIN) at
the bottom of the windscreen aper ture.
I
t is marked on a label visible through the
windscreen, left hand side.
9
technical data
336
eco-driving ..................................................... 10el
ectronic brake force distribution (eB FD) ...14
2
el
ectronic engine immobiliser .................61, 102
em
ergency boot release
................................. 63em
ergency warning lamps
........................... 1
41
en
gine compartment
...........................208, 209
en
gine compartment fuses
........................... 19
1
en
gine, Diesel
............... 2
09, 211, 212, 226 -232
en
gine oil
...................................................... 213
en
gine oil level dipstick .................................213
en
gine, petrol
................................ 208, 211, 219
en
vironment
........................ 1
0, 60, 81, 196, 215
er
ror messages
(audio equipment)
..............................332, 333 Identification plates
.......................................
23
5
Indicators, direction ..............................
141, 18 3
Inflating tyres ..................................................10
Inputs for audio system
..................9 4, 278 -281,
304-305, 328-329
Instrument panel
...............................
..............12
Instrument panel screen
.............. 12
, 19 - 31, 10 4
Interior fittings
...........................................90, 91
iPhone
.................................................. 2
80, 306
iPod
......................................................280, 306
ISOFIX mountings .........................16 4, 165, 168
Jack
........
.......................................................175
E
G
F
I
J
H
gearbox, manual ..................103, 104, 111, 217ge
ar lever, manual gearbox .........................103
ge
ar shift indicator
....................................... 104
gl
ove box .................................................. 90, 91
g.
P. S .
.................................................... 254-267
gr
ab handles
.................................................. 95gu
idance
............................................... 254-267
Deactivation of the passenger
and rear window control switches
................ 68
D
eadlocking
..............................................
55, 57
Demisting-Defrosting
..........................
77, 88, 89
Dials
................................................................
12
Diesel additive level
......................................
215
Dimensions
...................................................
233
Dipped beam
...............................
..........
182, 18 4
Dipstick
................
..........................................
213
Direction indicators
...............
141, 182, 183, 18 6
Doors
...............................................................
62
Driving economically ....................................... 10Filling with fuel ......................................
210, 211
Fitting a wheel
...............................
................
179
Fittings, boot
................................................... 96
F
ittings, rear
...............................
.....................
95
Fitting the mat
.................................................
91
Flashing indicators
........
141, 182, 183, 185, 18 6
Folding/unfolding the door mirrors
.................
78
Four-wheel drive system
...............................
118
Frequency (radio)
..........................
275, 300, 317
Front foglamps
..............................
129, 182, 18 4
Front seats
..........................................
71, 72, 74
Fuel .................................................. 10, 210, 211
Fuel consumption
............................................ 10
F
uel filler cap .................................................
210
Fuel filler flap .................................................
210
Fuel gauge
......................................................
12
Fuel tank ........................................................ 210
Fuses
.............................................................
188
Fuses in dashboard
......................................
189Hazard warning lamps
..................................
141
Headlamp adjustment
...................................
13 3
Headlamp wash
............................................
13 5
Headlamp wash reservoir
.............................
215
Head restraints, front ......................................
73
Head restraints, rear .......................................
75
Heated seats
...................................................
74
Heating
................................................
10, 82, 84
Height and reach adjustment, steering wheel
..............................................
79
Hill start assist
...............................................
11
0
Alphabetical index
111
4
Driving
4008-add_en_Chap04_conduite_ed01-2015
Stop & Start (Auto Stop & Go) system
Operation
Going into engine STOP mode
The "AS &G" warning lamp comes on in the instrument panel or the instrument panel screen and the engine goes into standby after a few seconds:
- with a manual gearbox , with the vehicle stationary and your foot on the brake, when you put the gear lever into neutral and release the clutch pedal.
Never refuel with the engine in STOP mode; you must switch off the ignition with the key or the START/STOP button.
When the engine is stopped automatically, the operation of certain vehicle systems, such as for example, braking, power steering... are modified. Ta k e c a r e.
Special cases: STOP mode not available
STOP mode is not invoked when: - the driver's seat belt is not fastened, - the driver's door is open, - the bonnet is open, - the minimum time period of 30 seconds since starting the engine has not elapsed, - the vehicle has not exceeded 3 mph (5 km/h) since the last engine start, - the vehicle has restarted less than 10 seconds ago, - the engine is needed to maintain a comfortable temperature in the passenger compartment, - demisting is active, - some special conditions (battery charge, engine temperature, braking assistance, ambient temperature...) where the engine is needed to assure control of a system.
- the "AS &G" warning lamp is flashing in the instrument panel.
This operation is perfectly normal.
The Stop & Start (Auto Stop & Go) system puts the engine temporarily into standby during stops in the traffic (red lights, traffic jams, or other...). The engine restarts automatically as soon as you want to move off. The restart takes place instantly, quickly and silently. Per fect for urban use, the Stop & Start (Auto Stop & Go) function reduces fuel consumption and exhaust emissions as well as the noise level when stationary.
If you move the gear lever, the "AS &G"warning lamp flashes, accompanied by an audible signal. The alert stops as soon as the gear lever is returned to the neutral position.