2014.5 Peugeot 308 navigation system

[x] Cancel search: navigation system

Page 41 of 415

Peugeot 308 2014.5  Owners Manual - RHD (UK, Australia) 39
touch screen
It gives access to:
- the heating/air conditioning controls,
-
 
m
 enus for adjusting settings for vehicle 
functions and systems,
-
 
a
 udio and display configuration menus,
-
 
a

Page 42 of 415

Peugeot 308 2014.5  Owners Manual - RHD (UK, Australia) 40
use this button to go to the 
secondary page.
us
e this button to return to the 
primary page.
us

e this button for access to 
additional information and to the 
settings for certain functions.
us

Page 303 of 415

Peugeot 308 2014.5  Owners Manual - RHD (UK, Australia) 301
t

he system is protected in such a way that it will only 
operate in your vehicle.
7-inch touch screen
01 General  operation
For safety reasons, the driver must carry out operations 
which requir

Page 304 of 415

Peugeot 308 2014.5  Owners Manual - RHD (UK, Australia) 01GENERAL OPERATION
* Depending on equipment.
"Air conditioning "
allows control of the 
settings for temperature 
and air flow.
"Driving assistance"
allows access to the trip 
compute

Page 306 of 415

Peugeot 308 2014.5  Owners Manual - RHD (UK, Australia) 02
304
FIRST STEPS
With the engine running, press to mute the 
sound.
With the ignition off, press to switch the 
system on. Volume adjustment (each source 
is independent, including Traffic 
announce

Page 332 of 415

Peugeot 308 2014.5  Owners Manual - RHD (UK, Australia) 05
330Towards a new destination
Choosing a new destination
Select "Enter destination".
Select "Save" to save the address entered as a 
contact entry.
t

he system allows up to 200 entr

Page 333 of 415

Peugeot 308 2014.5  Owners Manual - RHD (UK, Australia) 05
331
Towards a recent destination
Towards a contact
Navigation towards a contact imported from a telephone is only 
possible if the address entered is compatible with the system.
Select "Enter d

Page 337 of 415

Peugeot 308 2014.5  Owners Manual - RHD (UK, Australia)  
05
335
t

hese functions are only available if Risk Areas have been 
downloaded and installed on the system.
Select "Settings".
Select "Alert config.".
Risk area / Danger zone alert
Page:   1-8 9-16 next >