2014.5 Citroen C4 PICASSO RHD display

44
Distance recorders
The total and trip distances are displayed for thirty   seconds   when   the   ignition   is   switched   off,  
w

hen   the   driver's   door   is   opened   and   when   the  
v

ehicle   is   locked   or   unlocked.
When
  traveling   abroad,   you   may  
h

ave   to   change   the   units   of   distance:  
t

he   display   of   road   speed   must   be   in  
t

he   official   units   (miles   or   km)   for   the  
c

ountry.   The   change   of   units   is   done   via  
t

he   screen   configuration   menu,   with   the  
v

ehicle   stationary.
Trip distance recorder
It measures the distance travelled since it was reset   to   zero   by   the   driver.
F
 
W
ith   the   ignition   on,   press   the   button   until  
z

eros   appear.
Total distance recorder
It measures the total distance travelled by the vehicle   since   its   first   registration.
Monitoring

46
System allowing certain displays in the instrument   panel   to   be   switched   off   for   night  
d

riving.
The
  instrument   panel   remains   on   with   the  
v

ehicle   speed,   the   gear   selected   in   an  
e

lectronic   or   automatic   gearbox,   cruise   control  
o

r   speed   limiter   information,   if   in   use,   and   the  
l

ow   fuel   alerts   as   appropriate.
If
  there   is   an   alert   or   a   change   in   a   function  
o

r   to   a   setting,   the   black   panel   mode   is  
i

nterrupted. Using the steering mounted control:
F
 
W
ith   the   vehicle   lighting   on,   press   this  
b

utton   again   to   activate   the   black   panel.
F
 
P
ress   this   button   again   to   deactivate   it.
Black screen (touch screen tablet)Black screen (black panel)
F Press on the "Configuration"   menu.
F P ress the " Turn off screen "
  button.   The  
s

creen   in   the   touch   screen   tablet   goes   off.
 P

ress   the   screen   again   (anywhere   on   its  
s

ur face)   to   switch   it   on   again.
Monitoring

48
Trip computer
T ype   1   instrument   panel
System that gives you information on the journey in progress (range, fuel consumption…).
Information display in the touch screen tablet
Permanent display:
F Sel ect the " Driving assistance "
  menu.
The
  trip   computer   information   is   displayed   in  
t

he   primary   page   of   the   menu.
F
 
P
ress   one   of   the   buttons   to   display   the  
de

sired
 t
ab. The current instantaneous fuel
consumption
  tab   with:
-  
t
he   range,
-  
t
he   current   fuel   consumption,
-  
t
he   Stop   &   Start   time   counter.
The trip "1"
 
tab   with:
-  
t
he   distance   travelled.
-  
t
he   average   fuel   consumption,
-  t he   average   speed,  
 f or   the   first   trip.
The trip "2"
 

tab   with:
-
 
t
he   distance   travelled.
-
 
t
he   average   fuel   consumption,
-
 
t
he   average   speed,  
 
f

or   the   second   trip.
Trip reset
F When  the   desired   trip   is   displayed,   press  t
he   reset   button   or   on   the   end   of   the   wiper  
c

ontrol   stalk.
Tr i p s "1"
 

and   "2"
 
are   independent   but   their   use  
i

s   identical.
For
  example,   trip   "1"
 
can   be   used   for   daily  
f

igures,   and   trip   "2"
 
for   monthly   figures.
The
 
information
 
is
 
accessible
 
in
 
the
 
"
Driving assistance "
 
menu.
Temporary
 
display
 
in
 
a
 
new
 
window:
F
 
P

ress
 
the
 
end
 
of
 
the
 
wiper
 
control
 
stalk
 
for
 
a

ccess
 
to
 
the
 
information
 
and
 
display
 
the
 
d

ifferent
 
tabs.
Monitoring

49
Trip computer
T ype   2   instrument   panel
Information display in the instrument panel
F Press  the   button   on   the   end   of   the   wiper
control stalk  to   display   the   various   tabs   in  
s

uccession. -
 
T
he   current   information   tab   with:
●  
t
he   range,
●  
t
he   current   fuel   consumption,
●  
t
he   Stop   &   Start   time   counter.
-  
T
rip   "1"
 w
ith:
●  
t
he   average   speed.
●  
t
he   average   fuel   consumption,
●  t he   distance   travelled, f
or   the   first   trip.
-
 
T
rip   "2"
 w
ith:
●
 
t
he   average   speed,
●
 
t
he   average   fuel   consumption,
●
 
t
he   distance   travelled,
 f

or   the   second   trip.
Trip reset
F When  the   trip   required   is   displayed,   press  t
he   control   for   more   than   two   seconds  
o

r   use   the   left   hand   thumb   wheel   of   the  
s

teering   mounted   controls.
Tr i p s "1"
 

and   "2"
 
are   independent   but   their   use  
i

s   identical.
For
  example,   trip   "1"
 
can   be   used   for   daily  
f

igures,   and   trip   "2"
 
for   monthly   figures.
For
 
all
 
other
 
display
 
modes,
 
pressing
 
the
 
end
 
o

f
 
the
 
wiper
 
stalk
 
displays
 
this
 
information
 
in
 
a
 
n

ew
 
window.
The
 
display
 
of
 
trip
 
computer
 
information
 
is
 
p

ermanent
 
when
 
you
 
select
 
the
 
"DIALS"
 
d

isplay
 
mode.
1
Monitoring

50
Trip computer, a few definitions
Range
(miles or km)
T he   distance   which   can   still   be  
t

ravelled   with   the   fuel   remaining  
i

n   the   tank   (related   to   the  
a

verage   fuel   consumption   over  
t

he   last   few   miles   (kilometres)  
t

ravelled).
This
 
value   may   vary   following   a   change  
i

n
 
the
 
style   of   driving   or   the   relief,  
r

esulting   in   a   significant   change   in   the  
c

urrent
 
fuel   consumption.
When
 
the
 
range   falls   below   20   miles   (30   km),  
d

ashes
 
are
 
displayed.   After   filling   with   at   least  
5

 
litres
 
of
 
fuel,
  the   range   is   recalculated   and   is  
d

isplayed
 
when   it   exceeds   60   miles   (100   km).
If
 
dashes   are   displayed   continuously  
w

hile
 
driving   in   place   of   the   digits,  
c

ontact
  a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop. This
  function   is   only   displayed   from  
2

0   mph   (30   km/h).
Current fuel consumption
(mpg or l/100 km or km/l)
C alculated   over   the   last   few   seconds.
Average fuel consumption
(mpg or l/100 km or km/l)
C alculated   since   the   last   trip  
c

omputer
 re
set.
Average speed
(mph or km/h)
C alculated   since   the   last   trip  
c

omputer
 re
set.
Distance travelled
(miles or km)
C alculated   since   the   last   trip  
c

omputer
 re
set.
Stop & Start time
counter
(minutes / seconds or hours / minutes)
If
 
your
 
vehicle
  is   fitted   with   Stop   &   Start,   a   time  
c

ounter
 
calculates   the   time   spent   in   STOP  
m

ode
 
during
 
a   journey.  
I

t
 
resets
 
to
 
zero   every   time   the   ignition   is  
s

witched
 
on
 
with   the   START/STOP   button.
Monitoring

96
Heating
Temperature adjustment
F Press one of these buttons, or   move   the   cursor   from   blue  
(

cold)   to   red   (hot)   to   adjust   the  
t

emperature   to   your   wishes.
Air flow adjustment
F Press one of these buttons to increase   or   decrease   the   speed  
o

f   the   booster   fan.
Air distribution adjustmentThe intake of exterior air prevents and eliminates   misting   of   the   windscreen   and   side  
w

indows.
The
  recirculation   of   interior   air   prevents   exterior  
o

dours   and   smoke   entering   the   passenger  
c

ompartment.
Windscreen.
Centre
 
and
 
side
 
vents.
Footwells. The
  air   distribution   can   be   varied   by   using   more  
t

han   one   button.
Each   press   of   a   button   activates   or   deactivates  
t

he   function.
The   indicator   lamp   is   on   when   the   button   is  
a

ctivated.   For   an   even   distribution   of   air   in   the  
p

assenger   compartment,   the   three   buttons   can  
b

e   activated   simultaneously.
Air intake / Air recirculation
F Press this button to recirculate
the   interior   air.   The   indicator  
l

amp   in   the   button   comes   on.
F
 
P
ress   the   button   again   to   allow  
t

he   intake   of   exterior   air.   This   is  
c

onfirmed   by   the   indicator   lamp  
g

oing   off.
Avoid
 
driving
 
for
 
too
 
long
 
without
 
v

entilation
 
(risk
 
of
 
misting
 
and
 
d

eterioration
 
of
 
air
 
quality).
The
 
heating
 
system
 
works
 
only
 
when
 
the
 
e

ngine
 
is
 
running.
Press the button for the " Air conditioning"
menu
 
to
 
display
 
the
 
page
 
for
 
the
 
system
 
c

ontrols.
The
 
symbol
 
for
 
air flow
 
(a
 
fan)
 
fills
 
progressively
 
a

ccording
 
to
 
the
 
air
 
flow
 
setting
 
made.
By
 
reducing
 
the
 
air
 
flow
 
to
 
the
 
minimum,
 
you
 
a

re
 
stopping
 
ventilation
 
of
 
the
 
passenger
 
c

ompartment.
Comfort

97
Dual-zone manual air conditioning with temperature regulation
The air conditioning system operates with the engine r unning.
The
  temperature   at   the   nozzles   and   vents  
i

s   regulated   by   the   system   according   to   the  
t

emperature   in   the   passenger   compartment  
a

nd   the   temperature   setting.
Press the button for the " Air conditioning"
menu
  to   display   the   system   controls   page.Temperature adjustment
F Press one of these buttons to reduce   (blue)   or   increase   (red)  
t

he   value.
Air flow adjustment
Press one of these buttons to
increase   or   decrease   the   speed   of  
t

he   air   booster   fan.
The
 
driver
 
and
 
front
 
passenger
 
can
 
each
 
adjust
 t
he t
emperature.
The value indicated corresponds to a level of c
omfort   and   not   to   a   temperature   in   degrees   Celsius o

r   Fahrenheit   (depending   on   the   unit   selected).
A setting of around 21 provides optimum comfort.   Depending   on   your   requirements,  
a
  setting   between   18   and   24   is   normal.
In
  addition,   it   is   recommended   that   a   difference  
b

etween   left   and   right   of   more   than   3   should   be  
av

oided. The
  air   flow   symbol   (a   fan)   fills   progressively  
a

ccording   to   the   quantity   of   air   wanted.
By   reducing   the   air   flow   to   minimum,   you   are  
s

topping
 v
entilation.
Avoid  
d
riving  
t
oo  
l
ong  
w
ithout  
v
entilation  
(

risk   of   misting   and   deterioration   of   air  
q

uality).
3
Comfort

99
Dual-zone automatic air conditioning
This air conditioning system operates with the engine running, but the ventilation and its controls are   available   with   the   ignition   on.
Operation
  of   the   air   conditioning   and   regulation   of   temperature,   air   flow   and   air   distribution   in   the  
p

assenger   compartment   are   automatic.
Press the button for the " Air conditioning"
  menu   to   display   the   controls   for   the   air   conditioning  
s

ystem.Temperature adjustment
1. Automatic   mode.
2. D river's   side   temperature   adjustment.
3.
 P

assenger's
 s
ide
 t
emperature
 a
djustment. The
  driver   and   front   passenger   can   each   set  
t

he
 t
emperature.
F
P
ress one of these buttons
to   increase   the   value.
F
P
ress one of these buttons
to   decrease   the   value.
The   value   indicated   corresponds   to   a   level   of  
c

omfort   and   not   to   a   precise   temperature.
It   is   recommended   that   you   avoid   a   left /right  
s

etting   difference   of   more   than   3.
Depending   on   the   colour   scheme   chosen,   the   system   controls   page   is   displayed   differently:
4. A ir   conditioning   On   /   Off.
5. A ir d istribution a djustment.
6.
 A

ir   flow   adjustment.
7.
 A

ir   intake   /   air   recirculation.
3
Comfort