2014.5 Citroen C4 stop start

252
12 V battery
The battery is located under the  bonnet.
For   access   to   the   (+)   terminal:
F
 
r
elease   the   bonnet   using   the   interior   lever,  
t

hen   the   exterior   safety   catch,
F
 
r
aise   the   bonnet   and   secure   it   with   its   stay,
F

l
ift the plastic cover for access to
the (+) terminal.
Access to the batteryProcedure for starting the engine  u sing   another  b
attery   or   charging   a   discharged   battery.
The presence of this label, in particular
with
  the   Stop   &   Start   system,   indicates
 t

he   use   of   a   12 V   lead-acid   battery   with
 s

pecial
 t
echnology
 a
nd
 s
pecification;
 t

he   involvement   of   a   CITROËN   dealer   or
 a

  qualified   workshop   is   essential   when
 r

eplacing   or   disconnecting   the   battery.After
  refitting   the   battery,   the   Stop   &  
S

tart   system   will   only   be   active   after   a  
c

ontinuous   period   of   immobilisation   of  
t

he   vehicle,   a   period   which   depends  
o

n the   climatic   conditions   and   the  
s

tate of   charge   of   the   battery   (up   to  
a

bout   8 hours).
Practical information

255
Charging the battery using
a battery charger
F Disconnect   the   battery   from   the   vehicle.
F  F ollow   the   instructions   for   use   provided   by  
t

he   manufacturer   of   the   charger.
F
 
C
onnect   the   battery   starting   with   the  
n

egative   terminal   (-).
F
 
C
heck   that   the   terminals   and   connectors  
a

re   clean.   If   they   are   covered  
w
ith
 s
ulphate
 (

whitish   or   greenish   deposit),   remove   them  
a

nd   clean   them.
Reinitialisation after
reconnection
after any reconnection of the battery, switch on
the  ignition   and   wait   at   least   one   minute   before  
s

tarting,   to   allow   time   for   the   initialisation   of   the  
e

lectronic   systems.
By
  referring   to   the   corresponding   sections,   you  
s

hould   set   or   initialise   the   following   systems  
y

ourself:
-
 
o
ne-touch   electric   windows,
-
 
t
ime   and   date,
-
 
a
udio   and   navigation   system   settings.
Check
  that   no   alert   message   or   warning   lamp  
c

omes   on   after   switching   on   the   ignition.
However,
  if   minor   problems   persist   after  
c

arrying   out   these   operations,   contact   a  
C

ITROËN   dealer   or   a   qualified   workshop.
Reconnecting the (+) cable
F Position  the   open   clamp   E of the cable on
the   positive   post   (+)   of   the   battery.
F
 
P
ress   vertically   on   the   clamp   E to position
it
  correctly   on   the   battery.
F
 
L
ock   the   clamp   by   spreading   the  
p

ositioning   lug   and   then   lowering   the   tab   D.
Disconnecting the (+) cable
F Raise   the   locking   tab   D fully to release the
cable t erminal c lamp E.
D
o   not   apply   excessive   force   on   the  
t

ab   as   locking   will   not   be   possible   if   the  
c

lamp   is   not   positioned   correctly;   start  
t

he   procedure   again. With
  Stop   &   Start,   the   battery   does   not  
h

ave   to   be   disconnected   for   charging.
11
Practical information

256
Load reduction modeE nergy ec onomy m ode
Switching to economy mode
Once this period has elapsed, a message a
ppears   in   the   screen   indicating   that   the  
v

ehicle   has   switched   to   economy   mode   and   the  
a

ctive   functions   are   put   on   standby.
Exiting economy mode
These functions are reactivated automatically the   next   time   the   vehicle   is   driven.
F
 
I
n   order   to   resume   the   use   of   these  
f

unctions   immediately,   start   the   engine   and  
l

et   it   run   for   a   few   minutes.
The
  time   available   to   you   will   then   be   double  
t

he   period   for   which   the   engine   is   left   running.  
H

owever,   this   period   will   always   be   between  
f

ive   and   thirty   minutes.
System
 
which
 
manages
 
the
 
use
 
of
 
certain
 
f

unctions
 
according
 
to
 
the
 
level
 
of
 
charge
 
r

emaining
 
in
 
the
 
battery.
When
 
the
 
vehicle
 
is
 
being
 
driven,
 
the
 
load
 
r

eduction
 
function
 
temporarily
 
deactivates
 
c

ertain
 
functions,
 
such
 
as
 
the
 
air
 
conditioning,
 
t

he
 
heated
 
rear
 
screen...
The
 
deactivated
 
functions
 
are
 
reactivated
 
a

utomatically
 
as
 
soon
 
as
 
conditions
 
permit. System
 
which
 
manages
 
the
 
period
 
of
 
use
 
of
 
certain
  functions   to   conserve   a   sufficient   level   of  
c

harge
 
in
 
the
 
battery.
After
 
the
 
engine
 
has
 
stopped,
 
you
 
can
 
still
 
use
 
functions   such   as   the   audio   equipment,   windscreen  
w

ipers,
 
dipped
 
beam
 
headlamps,
 
courtesy
 
lamps,
 
etc.   for
 a m
aximum
 c
ombined
 p
eriod
 o
f  
t

hirty minutes.
A  flat   battery   prevents   the   engine   from  
s

tarting   (refer   to   the   corresponding  
par

agraph).
This
 
period
 
may
 
be
 
greatly
 
reduced
 
if
 
t

he
 
battery
 
is
 
not
 
fully
 
charged.
If
 
the
 
telephone
 
is
 
being
 
used
 
at
 
the
 
s

ame
 
time
 
on
 
the
 
navigation
 
system,
 i

t
 
w

ill
 
be
 
interrupted
 
after
 
1

0
 m

inutes.
Practical information

272
*  The  maximum   power   corresponds   to   the   value   type-approved   on   a   test   bed,   under   conditions   defined   in   European   legislation  
(Directive 1 999/99/EC).
.../S:
 

model   fitted   with   Stop   &   Start.
.../1:  model
  fitted   with   low   rolling   resistance   tyres.
.../2:
 

model   fitted   with   very   low   rolling   resistance   tyres.
Petrol engine
Puretech 130 S&STHP 155
Gearbox Manual

(6- speed) EAT6 Automatic
(6- speed) ETG6 Electronic

(6- speed)
Model code:
NC... HNYM/S
HNYM/1S HNY T/S
HNY T/1S
HNY T/2S 5FV8/P
Cubic capacity (cc) 1   199
1   598
Bore   x   stroke   (mm)
70   x   90.5
77   x   85.8
Max   power*:   EU   standard   (kW)
96115
Max   power   engine   speed   (rpm)
5   500
6   000
Max   torque:   EU   standard   (Nm)
230240
Max   torque   engine   speed   (rpm)
1   750
1   400
Fuel UnleadedUnleaded
Catalytic converter Ye sYe s
Engine oil capacity (in litres) 3.54,25
Technical data

275
*  The  maximum   power   corresponds   to   the   value   type-approved   on   a   test   bed,   under   conditions   defined   in   European   legislation  
(Directive 1 999/99/EC).
Diesel engines and gearboxes
.../S: model   fitted   with   Stop   &   Start.
.../1:  model   fitted   with   low   rolling   resistance   tyres   (for   example:   MICHELIN   Energy   Saver).
.../2:
 

model   fitted   with   very   low   rolling   resistance   tyres.
Diesel engine
HDi 90HDi 90 FAP BlueHDi 100 e-HDi 115
Gearbox Manual
(5 - speed) Manual
(5 - speed) Manual
(5 - speed) Manual
(6- speed) ETG6
Electronic (6- speed)
Model code:
NC... 9HJC

9HJC/1 9HP0BHY6
BHY6/1
BHY6/2S 9HD8/S

9HD8/1S
9HD8/2S 9HD8/1PS

9HD8/ 2PS
Cubic capacity (cc) 1   560
1   560
1   560
1   560
Bore   x   stroke   (mm)
75   x   88.3 75   x   88.3 75   x   88.3
75   x   88.3
Max   power*:   EU   standard   (kW)
6868 73 84
Max   power   engine   speed   (rpm)
4   000
4   000
3   750
3   600
Max   torque:   EU   standard   (Nm)
230230254 270
Max   torque   engine   speed   (rpm)
1   750
1   750
1   750
1   750
Fuel
die
sel
die
sel
die
sel
die
sel
Catalytic converter Ye sYe sYe s Ye s
Particle filter (F
aP
)
n
o
Ye s Ye s Ye s
Engine oil capacity (in litres) 3.753.753.75 3.75
12
Technical data

276
*  The  maximum   power   corresponds   to   the   value   type-approved   on   a   test   bed,   under   conditions   defined   in   European   legislation  
(Directive 1 999/99/EC).
.../S:
 

model   fitted   with   Stop   &   Start.
.../1:
 

model   fitted   with   low   rolling   resistance   tyres   (for   example:   MICHELIN   Energy   Saver).
.../2:
 

model   fitted   with   very   low   rolling   resistance   tyres.
Diesel engine
BlueHDi 115BlueHDi 120HDi 150 FAPBlueHDi 150
Gearbox Manual
(6- speed) E AT 6
Automatic (6- speed) Manual
(6- speed) E AT 6
Automatic (6- speed) Manual
(6- speed) E AT 6
Automatic (6- speed)
Model code:
NC... BHXM/S
BHXM/1S
BHXM/2S BHX T/S
BHX T/1S
BHX T/2S BHZM/S
BHZM/1S
BHZM/2S BHZT/S
BHZ T/1S
BHZT/2S RHE8

RHE8/1 AHRM/S
AHRM/1S
AHRM/2S
Cubic capacity (cc) 1   560
1   560
1   997
1   997
Bore   x   stroke   (mm)
75   x   88.3
75   x   88.3
85   x   88 85   x   88
Max   power*:   EU   standard   (kW)
858811 011 0
Max   power   engine   speed   (rpm)
3   500
3   500
3   750
4   000
Max   torque:   EU   standard   (Nm)
300300340370
Max   torque   engine   speed   (rpm)
1   750
1   750
2   000 2   000
Fuel
die
sel
die
sel
die
sel
die
sel
Catalytic converter Ye sYe sYe sYe s
Particle filter (F
aP
)
Ye sYe sYe sYe s
Engine oil capacity (in litres) 3.753.755.256 .1
Technical data

309
Level 1
Level 2 Level 3 Comments
Navigation Settings
Navigation Enter destination
Display recent destinations.
Calculatory criteria
Fastest
Choose the navigation criteria.
The   map   displays   the   route   chosen   according   to   these  
criteria.
Shortest
Time/distance
Ecological
Tolls
Ferries
Strict
  -   Close
Show
  route   on   map
Display the map and start navigation.
ConfirmSave the options.
SaveSave the current address.
Stop navigationDelete the navigation information.
VoiceChoose the volume for voice and announcement of street names.
DiversionDetour from your initial route by a certain distance.
Navigation
Display in text mode.
Zoom   in.
Zoom
  out.
Display
  in   full   screen   mode.
Use
  the   arrows   to   move   the   map.
Switch
  to   2D   map.

05
314Towards a new destination
Choosing a new destination
Select "Enter destination".
Select "Save"
  to   save   the   address   entered   as   a  
contact

  entry.
The
  system   allows   up   to   200   entries. Select "Confirm" or press "Show route on
map"
  to   start   navigation   guidance.
Select "Address".
Select the "Country:"
  from   the   list   offered   then  
in

  the   same   way:  
the "

City:"   or   its   post   code,   the   "Road:",
the
"N°:".   Confirm   each   time. Select "Navigate to".
Choose
  the   restriction   criteria:   "Include
tollroads", "Include ferries", "Traffic", "Strict",
"Close". Choose   the   navigation   criteria:   "
Fastest" or
"Shortest" or "Time/distance" or "Ecological ".
To   delete   navigation   information,   press   on  
"

Settings" then "Stop navigation".
To
  restore   the   navigation   information   press   on  
"

Settings" then "Resume navigation".
Press on Navigation
  to   display   the   primary  
page

  then   go   to   the   secondary   page.
NAVIGATION - GUIDANCE