2014.5 Citroen C4 display

10
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
Optimise the use of your
gearbox
With a manual gearbox, move off gently and change up without waiting. During   acceleration   change   up   early.
With
  an   automatic   or   electronic   gearbox,   give   preference   to   automatic  
m

ode   and   avoid   pressing   the   accelerator   pedal   heavily   or   suddenly.
Drive smoothly
Maintain a safe distance between vehicles, use engine braking rather than   the   brake   pedal,   and   press   the   accelerator   progressively.   These  
p

ractices   contribute   towards   a   reduction   in   fuel   consumption   and  
C

o
2 emissions and also helps reduce the background traffic noise.
I
f
 
your   vehicle   has   cruise   control,   make   use   of   the   system   at   speeds  
a

bove   25   mph   (40   km/h)   when   the   traffic   is   flowing   well.
Control the use of your electrical
equipment
Before moving off, if the passenger compartment is too warm, ventilate it by   opening   the   windows   and   air   vents   before   using   the   air   conditioning.
Above
  30   mph   (50   km/h),   close   the   windows   and   leave   the   air   vents
 ope

n.
Remember
  to   make   use   of   equipment   that   can   help   keep   the
 t

emperature   in   the   passenger   compartment   down   (sunroof   and   window
 b

linds...).
Switch
  off   the   air   conditioning,   unless   it   has   automatic   regulation,   as
 s

oon   as   the   desired   temperature   is   attained.
Switch
  off   the   demisting   and   defrosting   controls,   if   not   automatic.
Switch
  off   the   heated   seat   as   soon   as   possible.
Switch
  off   the   headlamps   and   front   foglamps   when   the   level   of   light  
d

oes   not   require   their   use.
Avoid
  running   the   engine   before   moving   off,   particularly   in   winter;   your  
v

ehicle   will   warm   up   much   faster   while   driving.
As
  a   passenger,   if   you   avoid   connecting   your   multimedia   devices  
(

film,   music,   video   game...),   you   will   contribute   towards   limiting   the  
c

onsumption   of   electrical   energy,   and   so   of   fuel.
Disconnect
  your   portable   devices   before   leaving   the   vehicle.
Eco-driving
The gear efficiency indicator invites you engage the most suitable gear: as   soon   as   the   indication   is   displayed   in   the   instrument   panel,   follow   it  
s

traight   away.
For
  vehicles   fitted   with   an   electronic   or   automatic   gearbox,   this  
i

ndicator   appears   only   in   manual   mode.
Eco-driving

12
Type 1 instrument panel
Dials and screens
1. Rev  counter   (x   1   000   rpm   or   tr/min).
2. G ear   efficiency   indicator   or   gear   selector  
l

ever   position   and   gear   for   an   electronic   or  
a

utomatic   gearbox.
3.
 C

ruise   control   or   speed   limiter   setting.
4.
 D

igital   speedometer   (mph   or   km/h).
5.
 E

ngine   oil   level   indicator. 6. S
ervice i ndicator (
miles   or   km)   then,
 t

otal   mileage   recorder.
 T

hese   two   functions   are   displayed  
s

uccessively   on   switching   on   the   ignition.
 L

ighting   dimmer   setting   (when   making   an  
adj

ustment).
7.
 T

rip   mileage   recorder   (miles   or   km).
8.
 F

uel   gauge   and   associated   low   fuel   level  
w

arning
 lam
p.
9.
 T

ime   (a)
 
/   range   (miles   or   km)   for   fuel   (b) or
the
  AdBlue   additive   and   SCR   system   (c).
Control buttons
A. Lighting   dimmer   (available   in   night   mode).
B. R eset   service   indicator   or   trip   mileage  
re

corder.
A
  and   B.
 S
etting   the   time   and   selecting   units.
Monitoring

13
Type 2 instrument panel
Dials and screens
A. Lighting  dimmer   (available   in   night   mode).
B. R eset   the   service   indicator   or   the   trip  
mil

eage
 re
corder.
6. S
ervice i
ndicator (
miles
 
or
 
km)
 
then,
 t

otal
 
mileage
 
recorder.
 T

hese
 
two
 
functions
 
are
 
displayed
 
s

uccessively
 
on
 
switching
 
on
 
the
 
ignition.
 L

ighting
 
dimmer
 
setting
 
(when
 
making
 
an
 
adj

ustment).
7.
 T

rip
 
mileage
 
recorder
 
(miles
 
or
 
km).
8.
 F

uel
 
gauge
 
and
 
associated
 
low
 
fuel
 
level
 
w

arning
 lam

p.
9.
 R

ange
 
(miles
 
or
 
km)
 
for
 
the
 
remaining
 
f

uel

( a )
 
or
 
the
 
AdBlue
 
additive
 
and
 
the
 
SCR
 
s

ystem
 
( b ).
Control buttons
1. Rev   counter   (x   1   000   rpm   or   tr/min).
2. G ear   efficiency   indicator   or   gear   selector  
l

ever   position   and   gear   for   an   electronic   or  
a

utomatic   gearbox   .
3.
 C

ruise   control   or   speed   limiter   setting.
4.
 D

igital   speedometer   (mph   or   km/h).
5.
 E

ngine   oil   level   indicator.
1
Monitoring

14
Customisable colour instrument panel
1. Rev  counter   (x   1   000   rpm   or   tr/min).
2. G ear   efficiency   indicator   or   gear   selector  
l

ever   position   and   gear   for   an   electronic   or  
a

utomatic   gearbox.
3.
 A

nalogue   speedometer   (mph   or   km/h).
4.
 C

ruise   control   or   speed   limiter   setting.
5.
 D

igital   speedometer   (mph   or   km/h).
6.
 E

ngine   oil   level   indicator. A. D
ial   COLOUR:   customisation   of   the  b
ackground   colour   of   the   dials.
B.
 S

creen   COLOUR:   customisation   of   the  
b

ackground   colour   of   the   screens.
C.
 L

ighting   dimmer   (available   in   night   mode).
D.
 R

eset   the   service   indicator   or   the   trip  
mil

eage
 re
corder.
Dials and screens
7. Service indicator (
miles   or   km)   then,
 t

otal   mileage   recorder.
 T

hese   two   functions   are   displayed  
s

uccessively   on   switching   on   the   ignition.
 L

ighting   dimmer   setting   (when   making   an  
adj

ustment).
8.
 T

rip   mileage   recorder   (miles   or   km).
9.
 F

uel   gauge   and   associated   low   fuel   level  
w

arning
 lam
p.
10.
 R

ange   (miles   or   km)   for   the   remaining  
f

uel (a )
  or   the   AdBlue   additive   and   the   SCR  
s

ystem   (b ).
Control buttons
Monitoring

16
Warning and indicator lamps
When the ignition is switched on
Certain warning lamps come on for a few seconds   when   the   ignition   is   switched   on.
When
  the   engine   is   started,   these   warning  
l

amps   should   go   off.
If
  they   remain   on,   before   moving   off,   refer   to   the  
i

nformation   on   the   warning   lamp   in   question.
Associated warnings
The illumination, fixed or flashing, of certain warning   lamps   may   be   accompanied   by   an  
a

udible   signal   and   the   display   of   a   message.
Warning lamps
When the engine is running or the vehicle is being   driven,   the   illumination   of   one   of   the  
fo

llowing
 w
arning
 lam
ps
 in
dicates
 a m
alfunction
 w

hich   requires   action   on   the   part   of   the   driver.
The
  warning   comes   on   in   the   instrument   panel.
Warning /indicator lampis on Cause Action/Observations
STOP fixed,
 
alone
 
or
 a

ssociated
 
with
 an

other
 w

arning
 lam

p,
 a

ccompanied
 
by
 
an
 a

udible
 
signal
 
and
 
a
 m

essage
 
in
 
the
 
screen. Illumination
  of   this   warning   lamp   is  
a

ssociated   with   a   serious   fault   with  
t

he   braking   system,   power   steering,  
e

ngine   lubrication   system   or   cooling  
s

ystem. Stop
  as   soon   as   it   is   safe   to   do   so   as   there   is   a   risk  
t

hat   the   engine   will   cut   out   while   driving.
Park,
  switch   off   the   ignition   and   contact   a   CITROËN  
d

ealer   or   a   qualified   workshop.
Maximum
coolant
temperature fixed
 
red. The
  temperature   of   the   cooling  
s

ystem   is   too   high. Stop
  as   soon   as   it   is   safe   to   do   so.
Wait
  until   the   engine   has   cooled   down   before   topping  
u

p   the   level,   if   necessary.
If
  the   problem   persists,   contact   a   CITROËN   dealer   or  
q

ualified
 w
orkshop.If
  your   vehicle   has   a   screen,   a   warning  
l

amp   coming   on   is   always   accompanied  
b

y   the   display   of   an   additional   message,  
t

o   assist   you   in   identifying   the   problem.
If   you   encounter   any   problems,   do   not  
h

esitate   to   contact   a   CITROËN   dealer  
o

r   a   qualified   workshop.
Visual
 
indicators
 
which
 
inform
 
the
 
driver
 
of
 
the
 
occurrence   of   a   malfunction   (warning   lamp)   or   of   the  
o

peration
 
of
 
a
 
system
 
(operation
 
or
 
deactivation
 
indicator   lamp).
Monitoring

29
Engine oil level
indicator*
Oil level correct
This is indicated by the flashing of "O IL" or the
display   of   a   message,   accompanied   by   the  
s

ervice   warning   lamp   and   an   audible   signal.
If
  the   low   oil   level   is   confirmed   by   a   check   using  
t

he   dipstick,   the   level   must   be   topped   up   to  
a

void   damage   to   the   engine.
Refer
  to   the   "Checking   levels"   section.
Oil level indicator fault
In the event of a fault with the electric indicator, the   oil   level   is   no   longer   monitored.
If
  the   system   is   faulty,   you   must   check   the  
e

ngine   oil   level   using   the   manual   dipstick  
l

ocated   under   the   bonnet.
Refer
  to   the   "Checking   levels"   section.Oil level incorrect
This is signalled by the flashing of "O IL--" or
the   display   of   a   message.
Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop.
On
 
versions
 
fitted
 
with
 
an
 
electric
 
oil
 
level
 
i

ndicator,
 
the
 
state
 
of
 
the
 
engine
 
oil
 
level
 
is
 
d

isplayed
 
in
 
the
 
instrument
 
panel
 
for
 
a
 
few
 
s

econds,
 
at
 
the
 
same
 
time
 
as
 
the
 
servicing
 
i

nformation.
*
 
Depending
 
on
 
version.
The
 
level
 
read
 
will
 
only
 
be
 
correct
 
if
 
t

he
 
vehicle
 
is
 
on
 
level
 
ground
 
and
 
the
 
e

ngine
 
has
 
been
 
off
 
for
 
more
 
than
 

30
 m

inutes.
1
Monitoring

33
Distance recorders
The total and trip distances are displayed for thirty   seconds   when   the   ignition   is   switched   off,  
w

hen   the   driver's   door   is   opened   and   when   the  
v

ehicle   is   locked   or   unlocked.
Trip distance recorder
Total distance recorder
Measures the total distance travelled by the v
ehicle   since   its   first   registration.
Measures
  the   distance   travelled   since   it   was  
l

ast   reset   to   zero   by   the   driver.
F
 
W
ith   the   ignition   on,   press   and   hold   this  
b

utton   until   zeros   appear.
1
Monitoring

34
Setting the time and the time
format in the instrument
panel with the clock
On the type 1 instrument panel (without audio system),   to   adjust   the   time,   use   buttons   A
and B then carry out the operations in the
following
 or

der:
F

p
ress buttons A   and   B  
s
imultaneously:
 t
he
 m

inutes
 f
lash,
F
press A
  to   increase   the   minutes   or   B to
reduce
  the   minutes,
F

p
ress buttons A   and   B  
s
imultaneously:
 t
he
 h

ours flash,
F
press A to increase the hours or B to
reduce
  the   hours,
F

p
ress buttons A   and   B  
s
imultaneously:
 
2

4   H   or   12   H   is   displayed   and   flashes,After
  approximately   30   seconds   without   any  
a

ction,   the   screen   returns   to   the   normal   display.On
  the   type   1   instrument   panel   (without   audio  
s

ystem),   to   change   the   display   units,   use  
b

uttons A   and   B then carry out the operations
in   the   following   order:
F
p
ress buttons A   and   B  
s
imultaneously
 fo
r
 t

hree   seconds:   km/h   or   mph   flashes,
F
p
ress button A or B   to   change   the   units,
F
p
ress buttons A   and   B   simultaneously   to  
e

xit   from   setting   units.
After   approximately   30   seconds   without   any  
a

ction,   the   screen   returns   to   the   normal   display.
Setting units in the instrument
panel with the clock
Setting the time and units
in the multifunction screen
The other instrument panels are associated w
ith   an   audio   system   and   a   multifunction  
s

creen.   Refer   to   the   corresponding   screens.
F

p

ress button A or B
 
to
 
change
 
the
 
format,
F

p

ress buttons A
 
and
 
B
 
simultaneously
 
to
 
e

xit
 
from
 
time
 
setting.
Monitoring