33
58
C4-2_en_Chap03_confort_ed01-2014
Driver's seat electric
adjustments
Forwards-backwardsThe electrical functions of the
driver's
seat
are
deactivated
ap
-
proximately
one
minute
after
the
ignition
is switched off.
To
reactivate
them,
switch
on
the
ignition.
F
T ilt the rear part of the control up-
wards
or downwards to obtain the
required
height.
F
T
ilt the front part of the control up-
wards
or
downwards
to
obtain
the
required
angle.
Cushion height and angle
F T ilt the control forwards or rear -
wards
to adjust the angle of the seat
backrest.
Seat backrest angle
F
Push
the
control
forwards
or
rear
-
wards
to slide the seat. Before
moving
the
seat
backwards,
ensure
that
there
is
nothing
that
might
prevent
the
full
travel
of
the
seat,
so
as
to
avoid
the
risk
of
of
jamming
the
seat
caused
by
the
presence
of
objects
on
the
floor
behind
the
seat
or
rear
passengers.
If the seat jams, stop the movement immediately.
COMFORT
55
87
C4-2_en_Chap05_visibilite_ed01-2014
To avoid causing a nuisance to other road
users, the height of the halogen
headlamps
should
be
adjusted
accord
-
ing
to the load in the vehicle.
0.
1
or 2 people in the front seats.
-.
3
people.
1.
5
people.
-.
Intermediate
setting.
2.
5
people
+
maximum
authorised
load.
-.
Intermediate
setting.
3.
Driver
+ maximum authorised load.
MANUAL AD j USTMENT OF HALOGEN
HEADLAMPS
The initial setting is position "0".
AUTOMATIC ADjUSTMENT OF XENON
HEADLAMPS
This system adjusts the height of the xenon
headlamp beams automatically
and
when
stationary
,
according
to
the
load
in
the
vehicle,
so
as
to
avoid
caus
-
ing
a nuisance to other road user.
If
a
malfunction
occurs,
this
warning
lamp
is
displayed
in
the
instrument
panel,
ac
-
companied
by
an
audible
signal
and
a
message
in the screen.
The system then places your headlamps in
the lowest position.
Do not touch the xenon bulbs.
Contact
a
CITROËN
dealer
or
a
qualified
workshop.
VISIBILITY
88
126
C4-2_en_Chap08_securite_ed01-2014
Seat belt not fastened / unfastened
warning lamp in the instrument panelWhen
the
ignition
is
switched
on, this
warning
lamp
comes
on
in the
instrument
panel
if
the
driver and/or
the
front
passenger
has not
fastened their seat belt.1.
Driver's
seat
belt
not
fastened
/
un
-
fastened warning lamp.
2.
Front
passenger's
seat
belt
not
fas
-
tened / unfastened warning lamp.
Seat belt not fastened / unfastened
warning lamps display
F
T
o
lower
the
attachment
point,
squeeze
the
control
A
and
slide
it
downwards.
F
T
o
raise
the
attachment
point,
slide
the control
A upwards.
Height adjustment
SEAT BELTS
Front seat belts
The front
seat belts are fitted with a pre -
tensioning and force limiting system.
This
system
improves
safety
in
the
front
seats
in
the
event
of
a
front
or
side
im
-
pact.
Depending
on
the
severity
of
the
impact,
the
pretensioning
system
in
-
stantly
tightens
the
seat
belts
against
the
body of the occupants.
The
pretensioning
seat
belts
are
active
when
the ignition is on.
The
force
limiter
reduces
the
pressure
of
the seat belt on the chest of the oc-
cupant,
so improving their protection.
Fastening
F
Pull
the
strap,
then
insert
the
tongue
in
the buckle.
F
Check
that
the
seat
belt
is
fastened
correctly
by pulling the strap.
Unfastening
F
Press
the red button on the buckle.
F
Guide
the seat belt as it reels in. The
corresponding
warning
lamp
1
or
2
comes
on
in
red
on
the
seat
belt
and
passenger's
front
airbag
warning
lamps
display
,
accompanied
by
an
audible
signal
and
a
message
in
the
screen,
if
the
seat
belt
is
not
fastened
or
is
unfastened.
From
approximately
12
mph
(20
km/h)
this
warning
lamp
flashes
for
two
minutes accompanied
by
an
audible
signal
of
in
-
creasing
volume.
Once
these
two
minutes have
elapsed,
this
warning
lamp
remains on
until
the
driver
and/or
the
front
passen
-
ger
fastens their seat belt.
SAFETY
88
128
C4-2_en_Chap08_securite_ed01-2014
The driver must ensure that passen -
gers use the seat belts correctly and
that
they
are
all
restrained
securely
before
setting off.
Wherever
you
are
seated
in
the
ve
-
hicle, always fasten your seat belt,
even
for short journeys.
Do
not
interchange
the
seat
belt
buckles
as
they
will
not
fulfil
their
role
fully
.
The
seat
belts
are
fitted
with
an
inertia
reel
permitting
automatic
adjustment
of
the
length
of
the
strap
to
your
size.
The
seat
belt
is
stowed
automatically
when
not in use.
Before
and
after
use,
ensure
that
the
seat
belt is reeled in correctly.
The
lower
part
of
the
strap
must
be
positioned
as
low
as
possible
on
the
pelvis.
The
upper
part
must
be
positioned
in
the
hollow of the shoulder.
The
inertia
reels
are
fitted
with
an
auto
-
matic
locking
device
which
comes
into operation in the event of a collision,
emergency
braking
or
if
the
vehicle rolls
over
.
Y
ou
can
release
the
device by
pulling
the
strap
firmly
and
then
re
-
leasing
it so that it reels in slightly.In
order to be ef fective, a seat belt must:
-
be
tightened
as
close
to
the
body
as possible,
-
be
pulled
in
front
of
you
with
a
smooth
movement,
checking
that
it
does not twist,
-
be
used
to
restrain
only
one
person,
-
not
bear
any
trace
of
cuts
or
fraying,
-
not
be
converted
or
modified
to
avoid
affecting its performance.
In
accordance
with
current
safety
regulations,
for
all
repairs
on
your
vehicle's
seat
belts,
go
to
a
qualified
workshop
with
the
skills
and
equip
-
ment
needed,
which
a
CITROËN
dealer
is able to provide.
Have
your
seat
belts
checked
regu
-
larly
by
a
CITROËN
dealer
or
a
qualified
workshop,
particularly
if
the
straps
show signs of damage.
Clean the seat belt straps with soapy
water
or
a
textile
cleaning
product,
sold
by CITROËN dealers.
After
folding
or
moving
a
seat
or
rear
bench seat, ensure that the seat belt
is
positioned and reeled in correctly.Recommendations for children
Use
a
suitable
child
seat
if
the
pas
-
senger
is
less
than
12
years
old
or
shorter
than one and a half metres.
Never
use
the
same
seat
belt
to
se
-
cure
more than one person.
Never
allow
a
child
to
travel
on
your
lap.
For
more
information,
refer
to
the
"Child
seats" section.
In the event of an impact
Depending on the nature and se-
riousness of the impact, the pre-
tensioning
device
may
be
deployed
before
and
independently
of
the
airbags.
Deployment
of
the
preten
-
sioners
is
accompanied
by
a
slight
discharge
of
harmless
smoke
and
a
noise,
due
to
the
activation
of
the
pyrotechnic
cartridge
incorporated
in
the
system.
In
all
cases,
the
airbag
warning
lamp
comes
on.
Following
an
impact,
have
the
seat
belts
system
checked,
and
if
neces
-
sary
replaced,
by
a
CITROËN
dealer
or
a qualified workshop.
SAFETY