2014.5 Citroen C4 CACTUS RHD tow

152
Locations for ISOFIX child seats
In accordance with European Regulations, this table indicates the options for installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX mountings.
In
  the   case   of   universal   and   semi-universal   ISOFIX   child   seats,   the   ISOFIX   size   category,   determined   by   a   letter   from   A to G,
  is   indicated   on   the   child  
s

eat   next   to   the   ISOFIX   logo.
I UF:

s
eat suitable for the installation of an I sofix
  Universal seat, F or ward
 
f

acing   secured   using   the   upper   strap.
IL- SU: seat suitable for the installation of an I sofix
  Semi- Universal
 sea

t
 ei
ther:
-
 
r
ear ward   facing   fitted   with   an   upper   strap   or   a   support   leg,
-
 
f
or ward   facing   fitted   with   a   support   leg,
-
 
a
n   infant   car   seat   fitted   with   an   upper   strap   or   a   support   leg.Weight of the child
  /   indicative   age
Less than 10 kg (group 0)
Up to about 6 months Less than 10 kg
(group 0)
Less than 13 kg (group 0+)
Up
  to   about   1   yearFrom 9 to 18 kg (group 1)
From
  about.   1   to   3   years
Type of ISOFIX child seat Infant car seatrearward facing rearward facing forward facing
ISOFIX size categor y F G C D E C D A B B1
1
st row Front p assenger sea tn ot ISo FIX
2
nd rowou ter rear seats
IL- SU IL- SU IL- SU IL- SU IL- SU IUF

IL- SU
Centre rear seat
n
ot IS
o
FIX
Remove
  and   stow   the   head   restraint   before   installing   a   child   seat   on   a   passenger   seat.
Refit
  the   head   restraint   once   the   child   seat   has   been   removed.For
  advice   on   securing   the   upper   strap,   refer   to   the   "ISOFIX   mountings"  
s

ection.
Child safety

153
Locations for i-Size child seats
The i-Size child seats have two latches that engage on the two rings A.
R efer   to   the   "ISOFIX   mountings"   section.
i- U:
 s

eat   suitable   for   i-Size   restraints   of   the   "universal"   category,  
f

or ward   facing   or   rear ward   facing.
Remove
  and   stow   the   head   restraint   before   installing   a   child   seat   on   a   passenger   seat.
Refit
  the   head   restraint   once   the   child   seat   has   been   removed.(
a )
 
t
o   install   a   child   seat   at   the   rear,   rear ward   facing   or   for ward   facing,  
m

ove   the   front   seat   for ward,   then   straighten   the   backrest   to   allow  
e

nough   space   for   the   child   seat   and   the   child's   legs.
The
  i-Size   child   seats   also   have:
-
 
e
ither   an   upper   strap   which   is   attached   to   the   ring   B   (see   the   "ISOFIX   mountings"   section).
-
 
o
r   a   support   leg   which   sits   on   the   vehicle's   floor,   compatible   with   seat   approved   for   i-Size,   the   role   of   which   is   to   prevent   the   child   seat   from   tipping  
f

or wards   in   the   event   of   a   collision.
In
  accordance   with   the   new   European   Regulations,   this   table   indicates   the   options   for   installing   i-Size   child   seats   on   seats   in   the   vehicle   fitted   with  
I

SOFIX   mountings   and   approved   for   i-Size. i-Size child seat
1
st row Front p assenger sea t Not   i-Size
2
nd row Outer   rear   seats   (
a ) i-U
Centre rear seat Not
  i-Size
8
Child safety

154
Child seats
Recommendations
Installing a booster
cushion
The chest part of the seat belt must be positioned   on   the   child's   shoulder   without  
t

ouching   the   neck.
Ensure
  that   the   lap   part   of   the   seat   belt  
p

asses   correctly   over   the   child's   thighs.
CITROËN
  recommends   the   use   of   a   booster  
s

eat   which   has   a   back,   fitted   with   a   seat   belt  
g

uide   at   shoulder   level.
As
  a   safety   precaution,   do   not   leave:
-
 
o
ne   or   more   children   alone   and  
u

nsupervised   in   a   vehicle,
-
 
a
  child   or   an   animal   in   a   vehicle   which  
i

s   exposed   to   the   sun,   with   the   windows  
c

losed,
-
 
t
he   keys   within   reach   of   children   inside  
t

he   vehicle.
To
  prevent   accidental   opening   of   the   doors,  
u

se   the   child   lock.
Take
  care   not   to   open   the   rear   windows   by  
m

ore   than   one   third.
To
  protect   young   children   from   the   rays   of  
t

he   sun,   fit   side   blinds   on   the   rear   windows.
Children at the front
For optimum installation o f t he fo rward f acing c
hild   seat,   ensure   that   the   back   of   the   child  
s

eat   is   as   close   as   possible   to   the   backrest  
o

f   the   vehicle's   seat,   or   in   contact   if   possible.
The
  head   restraint   must   be   removed   before  
i

nstalling   a   child   seat   with   a   backrest   on   the  
p

assenger
 sea
t.
Ensure
  that   the   head   restraint   is   stowed   or  
a

ttached   securely   so   that   it   is   not   thrown  
a

round   the   vehicle   in   the   event   of   sharp  
b

raking.
Refit
  the   head   restraint   as   soon   as   the   child  
s

eat   is   removed.
The
  legislation   on   carrying   a   child   on   the  
f

ront   passenger   seat   is   specific   to   each  
c

ountry.   Refer   to   the   legislation   in   force   in  
t

he   country   in   which   you   are   driving.
Deactivate
  the   passenger's   front   airbag  
w

hen   a   rear ward   facing   child   seat   is   installed  
o

n   the   front   passenger   seat.   Other wise,   the  
c

hild   would   risk   being   seriously   injured   or  
k

illed   if   the   airbag   were   deployed.
The
 
incorrect
 
installation
 
of
 
a
 
child
 
seat
 
in
 
a
 v
ehicle
 
compromises
 
the
 
child's
 
protection
 
in
 
t

he
 
event
 
of
 
an
 
accident.
Check
 
that
 
there
 
is
 
no
 
seat
 
belt
 
or
 
seat
 
belt
 
b

uckle
 
under
 
the
 
child
 
seat
 
as
 
this
 
could
 
de

stabilise
 i

t.
Remember
 
to
 
fasten
 
the
 
seat
 
belts
 
or
 
the
 
c

hild
 
seat
 
harnesses
 
keeping the slack in
relation
 
to
 
the
 
child's
 
body
 
to a minimum ,
even
 
for
 
short
 
journeys.
For
 
the
 
installation
 
of
 
a
 
child
 
seat
 
using
 
a
 
s

eat
 
belt,
 
ensure
 
that
 
this
 
is
 
well
 
tensioned
 
o

n
 
the
 
child
 
seat
 
and
 
that
 
it
 
is
 
holding
 
the
 
c

hild
 
seat
 
firmly
 
against
 
the
 
seat
 
of
 
your
 
v

ehicle.
 
If
 
your
 
front
 
passenger
 
seat
 
is
 
a

djustable,
 
move
 
it
 
for ward
 
if
 
necessary.
at t

he rear seats, always leave sufficient
space
 
between
 
the
 
front
 
seat
 
and:
-
 
a

 
rear ward
 
facing
 
child
 
seat,
-
 
t

he
 
feet
 
of
 
a
 
child
 
seated
 
in
 
a
 
for ward
 
f

acing
 
child
 
seat.
For
 
this,
 
move
 
the
 
front
 
seat
 
for ward
 
and
 
if
 
n

ecessary
 
straighten
 
its
 
backrest.
Child safety

156
Fuel tank
Capacity of the tank:
- Pe trol:   approximately   50   litres.
-
 
D
iesel:   approximately   45   or   50   litres   (depending   on   version).
Low fuel levelRefuelling
When the low fuel level is reached, t
his   warning   lamp   in   the   instrument  
p

anel   comes   on,   accompanied   by  
a

n   audible   warning,   a   message   and  
t

he   last   bar   of   the   fuel   gauge   flashes  
i

n   red.
To
  refuel   in   complete   safety:
F

Y
ou must switch off the engine.
F
 
O
pen   the   filler   flap.
A
  label   on   the   inside   of   the   fuel   filler   flap  r
eminds   you   of   the   type   of   fuel   to   use,  
d

epending   on   your   engine   type.
Additions
  of   fuel   must   be   of   at   least   5   litres   to  
b

e   registered   by   the   fuel   gauge.
When
 
it
 
first   comes   on,   about 5 litres of fuel
remain
 
in
 
the   tank.
Until
 
sufficient   fuel   has   been   added,   this  
w

arning
 
lamp   appears   every   time   the   ignition  
i

s
 
switched   on,   accompanied   by   an   audible  
w

arning
 
and   a   message.   This   audible   warning  
a

nd
 
message   are   repeated   with   increasing  
f

requency
  as   the   fuel   level   drops   towards   "0 ".
Refuel
 
as
  soon   as   possible   to   avoid  
r

unning out. Opening
  the   filler   cap   may   result   in   an   inrush   of  
a

ir.   This   is   entirely   normal   and   results   from   the  
s

ealing   of   the   fuel   system.
With Stop & Start, never refuel with the
system
  in   STOP   mode;   you   must   switch  
o

ff   the   ignition   with   the   key.
If
 
you   run   out   of   fuel   (Diesel),   refer  
a

lso   to   the   section   "Running   out   of   fuel  
(D

iesel)". F
 
T
ake   care   to   select   the   pump   that   delivers  
t

he   correct   type   of   fuel   for   your   vehicle.
F
 
I
ntroduce   the   key   into   the   cap   and   turn   it   to  
t

he   left.
Practical information

169
This kit is  installed  i n  t he  s torage  b ox,  u nder  t he  b
oot   floor.
Complete
 
system
 
consisting
 
of
 
a
 
compressor
 
a

nd
 
a
 
sealant
 
cartridge
 
which
 
permits
 
t

emporary repair
of a tyre so that you can
drive
 
to
 
the
 
nearest
 
garage.
It
 
is
 
designed
 
to
 
repair
 
most
 
punctures
 
which
 
c

ould
 
affect
 
the
 
tyre,
 
located
 
on
 
the
 
tyre
 
tread
 
o

r
 
shoulder.
Temporary pu
ncture r epair k it
Access to the kit
List of tools
These tools are specific to your vehicle and can v
ary   according   to   equipment.   Do   not   use   them  
f

or   other   purposes.
1.
 1

2   V   compressor.
 C

ontains   a   sealant   cartridge   for   the  
t

emporary   repair   of   a   tyre   and   can   also   be  
u

sed   for   adjusting   tyre   pressures.
2.
 T

owing   eye.
 S

ee   the   "Towing"   section.
9
Practical information

173
2. InflationF Turn the selector A to the "air" position.
F
 
U
ncoil   the   black   pipe   H  
f
ully.
F
 
C
onnect   the   black   pipe   to   the  
v

alve   of   the   wheel. F
 C onnect   the   compressor's   electric   plug   to  t
he   vehicle's   12   V   socket.
F
 
S
tart   the   vehicle   again   and   leave   the  
e

ngine
 r
unning.
As
  soon   as   possible,   go   to   a   CITROËN  
d

ealer   or   a   qualified   workshop.
You
  must   inform   the   technician   that   you  
h

ave   used   this   kit.   After   inspection,   the  
t

echnician   will   advise   you   on   whether  
t

he   tyre   can   be   repaired   or   if   it   must   be  
r

eplaced.F
 A djust   the   pressure   using   the   compressor  (
to   inflate:   switch   B in position "I";
 
t

o deflate:   switch   B in position "O"
 
and  
p

ress button C),
  in   accordance   with   the  
v

ehicle's  
t
yre   pressure   label   (located   on   the  
l

eft   hand   door   aperture).  
 
A

  loss   of   pressure   indicates   that   the  
p

uncture   has   not   been   fully   plugged;  
c

ontact   a   CITROËN   dealer   or   qualified  
w

orkshop   for   assistance.
F
 
R
emove   and   stow   the   kit.
F
 
D
rive   at   reduced   speed   (50   mph   [80   km/h]  
m

ax)   limiting   the   distance   travelled   to  
a

pproximately   120   miles   (200   km).
9
Practical information

174
Removing the cartridge
F Stow  the   black   pipe.
F  D etach   the   angled   base   from   the   white  
p

ipe.
F
 
S
upport   the   compressor   vertically.
F
 
U
nscrew   the   cartridge   from   the   bottom.Beware
  of   discharges   of   fluid.
The
  expiry   date   of   the   fluid   is   indicated  
o

n   the   cartridge.
The
  sealant   cartridge   is   designed   for  
s

ingle   use;   even   if   only   partly   used,   it  
m

ust   be   replaced.
After
  use,   do   not   discard   the   cartridge  
i

nto   the   environment,   take   it   to   an  
a

uthorised   waste   disposal   site   or   a  
C

ITROËN   dealer.
Do
  not   forget   to   obtain   a   new   sealant  
c

artridge,   available   from   CITROËN  
d

ealers   or   from   a   qualified   workshop.
Practical information

175
Checking tyre pressures /
i nflating accessories
You can also use the compressor, without i
njecting   any   product,   to:
-
 
c
heck   or   adjust   the   pressure   of   your   tyres,
-
 
i
nflate   other   accessories   (balls,   bicycle  
t

yres...). F

T
urn the selector A to the "
ai
r"
position.
F
 
U
ncoil   the   black   pipe   H  
f
ully.F
 C onnect   the   compressor's   electrical  
c

onnector   to   the   vehicle's   12   V   socket.
F
 
S
tart   the   vehicle   and   let   the   engine   run.
F
 
A
djust   the   pressure   using   the   compressor  
(

to   inflate:   switch   B in position "I";
 
t

o deflate:   switch   B in position "O"
 
and  
p

ress button C),
  according   to   the   vehicle's  
t

yre   pressure   label   or   the   accessory's  
p

ressure   label.
F
 
R
emove   the   kit   then   stow   it.Should
  the   pressure   of   one   or   more  
t

yres   be   adjusted,   it   is   necessary   to  
r

einitialise   the   under-inflation   detection  
s

ystem.
Refer
  to   the   "Under-inflation   detection"  
s

ection.
F
 
C
onnect   the   black   pipe   to   the   valve   of   the  
w

heel   or   accessory.
 I

f   necessary,   fit   one   of   the   adaptors  
s

upplied   with   the   kit   first.
9
Practical information