2014.5 Citroen C4 CACTUS RHD display

9
Optimise the use of your gearbox
With a manual gearbox, move off gently and change up without waiting. During   acceleration   change   up   early.
The
  gear   efficiency   indicator   invites   you   engage   the   most   suitable   gear:  
a

s   soon   as   the   indication   is   displayed   in   the   instrument   panel,   follow   it  
s

traight   away.
Control the use of your electrical
equipment
Before moving off, if the passenger compartment is too warm, ventilate it by   opening   the   windows   and   air   vents   before   using   the   air   conditioning.
Above
  30   mph   (50   km/h),   close   the   windows   and   leave   the   air   vents
 ope

n.
Remember
  to   make   use   of   equipment   that   can   help   keep   the
 t

emperature   in   the   passenger   compartment   down   (sunroof   and   window
 b

linds...).
To
  save   energy,   do   not   set   the   air   conditioning   at   too   low   a   temperature.
As
  soon   as   the   desired   temperature   has   been   reached,   limit   the   use   of
 t

he   air   conditioning,   except   if   regulation   is   automatic.
Switch
  off   the   demisting   and   defrosting   controls   as   soon   as   you   consider
 p

ossible.
Switch
  off   the   heated   seat   as   soon   as   possible.
Switch
  off   the   headlamps   and   foglamp   when   the   level   of   light   does   not  
r

equire   their   use.
Avoid
  running   the   engine   before   moving   off,   particularly   in   winter;   your  
v

ehicle   will   warm   up   much   faster   while   driving.
As
  a   passenger,   if   you   avoid   connecting   your   multimedia   devices  
(

film,   music,   video   game...),   you   will   contribute   towards   limiting   the  
c

onsumption   of   electrical   energy,   and   so   of   fuel.
Disconnect
  your   portable   devices   before   leaving   the   vehicle.
Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
With
 
an
 
electronic
 
gearbox,
 
do
 
not
 
press
 
the
 
accelerator
 
pedal
 
heavily
 
o

r
 s

uddenly.
Drive smoothly
Maintain a safe distance between vehicles, use engine braking rather t han   the   brake   pedal,   and   press   the   accelerator   progressively.   These  
p

ractices   contribute   towards   a   reduction   in   fuel   consumption   and   CO
2
emissions
 
and
 
also
 
help
 
reduce
 
the
 
background
 
traffic
 
noise.
If
 
your
 
vehicle
 
has
 
cruise
 
control,
 
make
 
use
 
of
 
the
 
system
 
at
 
speeds
 
a

bove
 
25
 
mph
 
(40
 
km/h)
 
when
 
the
 
traffic
 
is
 
flowing
 
well.
.
Eco-driving

11
Instrument panel
1. Service  indicator,   then   total   distance  r
ecorder   (miles   or   km).
 T

hese   functions   are   displayed   in   turn   when  
t

he   ignition   is   switched   on.
2.
 C

ruise   control   or   speed   limiter   settings.3. D
igital   speedometer   (mph   or   km/h).
4. I nformation   related   to   the   electronic  
g

earbox.
Display screens
5. Gear  efficiency   indicator.
6. E ngine   oil   level   indicator.
7.
 F

uel   gauge.
1
Monitoring

16
Passenger's
front airbag fixed.
The   control   switch,   located   in   the  g
love   box,   is   set   to   the   OFF p osition.
The
  passenger's   front   airbag   is  
d

eactivated.
You
  can   install   the   child   seat  
r

ear ward   facing,   unless   there   is   an  
a

irbag   fault   (Airbag   warning   lamp   on).Set the control to the "ON"
position to activate the
passenger's   front   airbag.
In
  this   case,   do   not   fit   a   child   seat   in   the   rear ward  
f

acing   position.
Dynamic
stability control
(DSC/ASR) fixed.
The
  button   is   pressed   and   the  
i

ndicator   lamp   comes   on.
The
  DSC/ASR   is   deactivated.
DSC:
  dynamic   stability   control.
ASR:
  anti-slip   regulation.Press
  the   button   to   activate   the   DSC/ASR.   Its  
i

ndicator   lamp   goes   off.
The
  DSC/ASR   system   is   activated   automatically   when  
t

he   vehicle   is   started.
If
  deactivated,   the   system   is   reactivated   automatically  
f

rom   around   30   mph   (50   km/h).
For
  more   information   on   DSC/ASR,   refer   to   the  
c

orresponding
 s
ection.
Warning / indicator lamp
StateCause Action / Observations
Deactivation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.
T his   is   may   be   accompanied   by   an   audible   signal   and   the   display   of   a   message.
Monitoring

24
Service indicator
System which informs the driver when the next   service   is   due,   in   accordance   with   the  
ma

nufacturer's
 ser
vicing
 s
chedule.
More than 1 800 miles (3 000 km)
remain before the next service is due
When the ignition is switched on, no service information   appears   in   the   screen.
Between 600 miles (1 000 km)
and 1 800 miles (3 000 km) remain
before the next service is due
For 5 seconds after the ignition is switched on, the s
panner s ymbolising t he ser vice o perations c omes o

n.   The   distance   recorder   display   line   indicates   the
 d

istance   remaining   before   the   next   service   is   due.
Example:
 

1   700   miles   (2   800   km)   remain   before
 t

he   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,   the
 s

creen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he spanner goes off ;
  the   distance   recorder  
r

esumes   its   normal   operation.   The   screen   then  
i

ndicates   the   total   distance.
Indicators
The point at which the next service is due is calculated   from   the   last   indicator   zero   reset,  
d

epending   on   the   distance   travelled   and   the  
t

ime   elapsed   since   the   last   service.
For
b
l
ueH
di
d
i
esel versions, the
degree
  of   deterioration   of   the   engine   oil  
i

s   also   taken   into   account   (depending  
o

n   the   country   of   sale).
Monitoring

26
Service indicator zero reset
After each service, the service indicator must be   reset   to   zero.
If
  you   have   carried   out   the   service   on   your  
v

ehicle
 y
ourself:
F
 
s
witch   off   the   ignition,
F
 
p
ress   and   hold   the   button   on   the   end   of   the  
l

ighting   control   stalk,
F
 
s
witch  
o
n  
t
he  
i
gnition;  
t
he  
d
istance  
r
ecorder  
d

isplay   begins   a   countdown,
F
 
w
hen   the   display   indicates   "=0", release
the
  button;   the   spanner   disappears. Following
  this   operation,   if   you   wish   to  
d

isconnect   the   battery,   lock   the   vehicle  
a

nd   wait   at   least   five   minutes   for   the  
z

ero   reset   to   be   taken   into   account.
Retrieving the service
information
You can access the service information at any time   in   the   touch   screen   tablet.
F

Sel
ect the "Driving assistance "
menu.
F
 
I
n   the   secondary   page,   select  
"D

iagnostic".
The
  servicing   information   is   displayed   in  
t

he screen.
Monitoring

27
Engine oil level indicator*
On versions fitted with an electric oil level indicator,   the   state   of   the   engine   oil   level   is  
d

isplayed   in   the   instrument   panel   for   a   few  
s

econds,   after   the   servicing   information.
The
  level   read   will   only   be   correct   if  
t

he   vehicle   is   on   level   ground   and   the  
e

ngine   has   been   off   for   more   than  
3

0 minutes.
Oil level correct
Oil level incorrect
This is indicated by the display of the message "Oil   level   incorrect"   in   the   instrument   panel  
s

creen,   accompanied   by   the   service   warning  
l

amp   and   an   audible   signal.
If
  the   low   oil   level   is   confirmed   by   a   check   using  
t

he   dipstick,   the   level   must   be   topped   up   to  
a

void   damage   to   the   engine.
Oil level indicator fault
This is signalled by the display of the message "Oil   level   measurement   invalid"   in   the  
in

strument
 pan
el.
Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Refer
 
to
 
the
 
"Checking
 
levels"
 
section.
*
 
Depending
 
on
 
version. In
  the   event   of   a   fault   with   the   electric   indicator,  
t

he   oil   level   is   no   longer   monitored.
If
  the   system   is   faulty,   you   must   check   the  
e

ngine   oil   level   using   the   manual   dipstick  
l

ocated   under   the   bonnet.
Refer
  to   the   "Checking   levels"   section.
1
Monitoring

28
7-inch touch screen tablet
The touch screen tablet gives access to:
-  t he   heating/air   conditioning   controls,
-
 
t
he   trip   computer   for   settings   for   certain  
v

ehicle functions,
-
 
a
udio   system   and   telephone   controls,
-
 
i
nteractive   help,   sound   settings   and   the  
b

rightness   of   instruments   and   controls,
and,
  depending   on   equipment:
-
 
t
he   controls   for   the   navigation   system   and  
c

onnected
 s
ervices.
For reasons of safety, the driver
should only carr y out operations
that require close attention, with the
vehicle stationary.
Some
  functions   are   not   accessible  
w

hen
 d
riving.General operation
Recommendations
It is necessary to press firmly, particularly for "flick"   gestures   (scrolling   through   lists,   moving  
t

he
 m
ap...).
A
  light   wipe   is   not   enough.
The
  tablet   does   not   recognise   pressing   with  
m

ore   than   one   finger.
This
  technology   allows   use   at   all   temperatures  
a

nd   when   wearing   gloves.
Do
  not   use   pointed   objects   on   the   touch   screen  
t

ablet.
Do
  not   touch   the   tablet   screen   with   wet   hands.
Uses a soft clean cloth to clean the tablet touch
screen. Use
  this   button   to   go   to   the  
s

econdary
 pag
e.
Use this button to return to the
primary
 pag

e.
Use this button for access to
additional
  information   and   to   the  
s

ettings   for   certain   functions.
Use
  this   button   to   confirm   and   save  
t

he   changes.
Use
  this   button   to   quit.
Principles
Use the buttons on either side of the screen for   access   to   the   menus,   then   press   the   virtual  
b

uttons   in   the   touch   screen.
Each
  menu   is   displayed   over   one   or   two   pages  
(

primary   page   and   secondary   page).
After
  a   few   moments   with   no   action   on  
t

he   secondary   page,   the   primary   page  
i

s   displayed   automatically.
In
 
very
 
hot
 
conditions,
 
the
 
system
 
may
 
g

o
 
into
 
standby
 
(display
 
and
 
sound
 
off)
 
f

or
 
a
 
minimum
 
period
 
of
 
5
 
minutes.
State of indicator lamps
Some buttons contain an indicator lamp that g ives   the   state   of   the   corresponding   function.
Green
  indicator:   you   have   switched   on   the  
c

orresponding
 f
unction.
Orange
  indicator:   you   have   switched   off   the  
c

orresponding
 f
unction.
Monitoring

30
State of adjustable systems
Operating fault
In the event of a fault with one of these
systems,  the   indicator   lamp   in   the   activation/
deactivation
  button   flashes   for   a   few   moments.
An
  alert   symbol   is   displayed   to   the   right   of   the  
b

utton   symbol,   then,   in   the   case   of   systems   that  
a

re   activated   by   default,   the   orange   indicator  
c

omes   on   permanently.
Every
  time   the   button   is   pressed,   the   indicator  
f

lashes   for   a   few   moments. Example:
●
 
F
unction   not   activated.
●
 
O
perating   fault   alert.
then
"Driving assistance" menu
Some systems have a dedicated button, to w hich   is   associated   an   indicator   lamp.
Illumination
  of   this   lamp   indicates   whether   the  
s

ystem   is   activated   or   deactivated   compared   to  
t

he   default   (factory)   setting.
Green
  indicator:   you   have   switched   on   the  
c

orresponding   system.
Orange
  indicator:   you   have   switched   off   the  
c

orresponding   system.
Monitoring