2014.5 Citroen C4 CACTUS RHD brake

90
Stop & Start
Operation
Going into engine STOP mode
The "ECO"  warning   lamp   comes   on i
n   the   instrument   panel   and   the   engine g

oes   into   standby   automatically:
-
 
w

ith a manual gearbox , when stationary,
in
 
neutral,   and   you   release   the   clutch  
ped

al.
-
 
w

ith an electronic gearbox , when
stationary
  or   at   speeds   below   5   mph  
(

8 km/h)   (depending   on   version),   in   neutral  
(

control   on   N)
  or   when   you   press   the   brake  
ped

al. Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition  
w

ith   the   button.
For
  your   comfort,   during   parking  
m

anoeuvres,   STOP   mode   is   not  
a

vailable   for   a   few   seconds   after  
c

oming   out   of   reverse   gear.
STOP
  mode   does   not   affect   the   the  
v

ehicle's   systems,   such   as   for   example,  
b

raking,   power   steering...
Special cases: STOP mode not
available
STOP mode is not invoked principally when:
-  t he   vehicle   is   on   a   steep   slope   (rising   or  
f

alling),
-
 
t
he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   by   the  
d

river,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, the "ECO"
 

warning  
l

amp   flashes   for   a   few   seconds   then  
g

oes off.
This operation is perfectly normal.
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
temporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
stops
 
in
 
the
 
traffic   (red   lights,   traffic   jams,  
or
 
other...).
 
The engine
 
restarts
 
automatically
 
-
 
START
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
off.
 
The
 
restart   takes   place   instantly,   quickly  
and
 
silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when  
stationary.
Stop & Start time counter
A cumulative time counter for periods i n   STOP   mode   during   a   journey.
It
 
is
 
displayed   in   the   trip   computer   (accessible  
v

ia the " Driving assistance "
  menu   of   the  
t

ouch
 
screen   tablet).
It resets to zero every time the ignition is switched on.
driving

91
Going into engine START mode
The "ECO" warning   lamp   goes   off  a
nd   the   engine   starts   automatically:
-
 
w

ith a manual gearbox , when you fully
depress
  the   clutch   pedal.
-
 
w

ith an electronic gearbox:
●
 
c

ontrol  
o
n  
D,

 
w
hen  
y
ou  
r
elease  
t
he  
b
rake  
ped

al,
●
 
c

ontrol   on   N   and   brake   pedal   released,  
w

hen you press control D ,
●
 w

hen
 y
ou
 enga
ge
 r
everse. START
  mode   is   invoked   automatically   when:
-  y ou   open   the   the   driver's   door,
-
 
y
ou   unfasten   the   driver's   seat   belt,
-
 
t
he   speed   of   the   vehicle   exceeds   7   mph  
(

11 km/h)   with   an   electronic   gearbox,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   for   control   of   a   system.
Special cases: START invoked
automatically
In this case the "ECO" warning   lamp  f
lashes   for   a   few   seconds,   then   goes  
o

f f.
This operation is perfectly normal. Before
  doing   anything   under   the  
b

onnet,   deactivate   the   Stop   &   Start  
s

ystem   to   avoid   any   risk   of   injury  
r

esulting   from   automatic   operation   of  
S

TART   mode.
This   system   requires   a   12   V   battery   with   a  
s

pecial   specification   and   technology   (reference  
n

umbers   available   from   CITROËN   dealers).
Fitting   a   battery   not   listed   by   CITROËN  
i

ntroduces   the   risk   of   malfunction   of   the  
s

ystem.
For   charging,   use   a   12   V   charger   and   do   not  r
everse   the   polarity.
Maintenance
The Stop & Start system makes use of a
dvanced   technology.   For   any   work   on  
t

he   system   go   to   a   qualified   workshop  
w

ith   the   skills   and   equipment   required,  
w

hich   a   CITROËN   dealer   is   able   to  
pro

vide.
5
Driving

92
A fault with the system is signalled in the " Driving assistance "
  menu  
(

primary   page)   of   the   touch   screen  
t

ablet.
Operating fault
In the event of a fault with the system, the   symbol   in   the button   changes   to   alert m

ode   and   the   indicator   lamp   flashes   for   a
 f

ew   moments   then   stays   on   continuously.
If you press this button to reactivate the
system,  the   indicator   lamp   flashes   again   for   a  
f

ew   moments   and   then   stays   on   continuously.
The
 
Stop
 
&
 
Start
 
system
 
can
 
be
 
deactivated
 
in
 
t

he
 
touch
 
screen
 
tablet.
Deactivation
If the system has been deactivated in STOP m ode,   the   engine   restarts   immediately.
When
  driving   on   a   flooded   road,   it   is  
r

ecommended   that   the   Stop   &   Start  
f

unction   be   deactivated   and   that   you  
d

rive   very   slowly. The
  system   can   be   reactivated   in   the   touch  
s

creen
 t
ablet.
Reactivation
The system is reactivated automatically e
very   time   the   engine   is   started   by  
t

he driver.
F

P

ress on " Stop & Star t ".
F

Sel

ect the " Driving assistance "
menu.
The
 
indicator
 
lamp
 
in
 
this
 
button
 
comes
 
on
 
c

ontinuously. Pressing
  this  
b
utton   again   reactivates  
t

he   Stop   &   Start   system.   The  
i

ndicator   lamp   in   the   button   goes   off.
Have   it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
In
  the   event   of   a   fault   in   STOP   mode,   the   vehicle
 m

ay   stall.
All
  of   the   instrument   panel   warning   lamps   come   on.
Depending
  on   version,   an   alert  
m

essage   may   also   be   displayed,   asking  
y

ou   to   change   to   neutral   (control   on   N)
 
a

nd   put   your   foot   on   the   brake   pedal.
You
  must   switch   off   the   ignition,   then  
s

tart   the   engine   again.
driving

98
Flashing of the dashes indicates a fault with the cruise   control.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Operating fault Switching off
F Turn wheel 1 to the "0" p osition. T
he   display   of   information   related   to   the  
c

ruise   control   disappears. When
  the   cruise   control   is   switched   on,  b
e   careful   if   you   maintain   the   pressure  o
n   one   of   the   programmed   speed  
c

hanging   buttons:   this   may   result   in   a  
v

ery   rapid   change   in   the   speed   of   your  
v

ehicle.
do n

ot use the cruise control on
slippery
  roads   or   in   heavy   traffic.
On
  a   steep   descent,   the   cruise   control  
w

ill not be able to prevent the vehicle
from
  exceeding   the   programmed   speed.
On
  steep   climbs   or   when   towing,   the  
p

rogrammed   speed   may   not   be   reached  
o

r   maintained.
The
  use   of   mats   not   approved   by  
C

ITROËN   may   inter fere   with   the  
o

peration   of   the   cruise   control.
To
  avoid   any   risk   of   jamming   of   the  
ped

als:
-
 
e
nsure   that   the   mat   is   secured  
c

o r r e c t l y,
-
 
n
ever   fit   one   mat   on   top   of   another.
It
 
is
 
possible
 
to
 
exceed
 
the
 
programmed
 
speed
 
t

emporarily
 
by
 
pressing
 
the
 
accelerator
 
pedal.
To
 
return
 
to
 
the
 
programmed
 
speed,
 
simply
 
r

elease
 
the
 
accelerator
 
pedal
 
until
 
the
 
p

rogrammed
 
cruise
 
speed
 
is
 
reached
 
again.
Exceeding the programmed
speed
Once switched on, you can pause the cruise c ontrol   at   any   time   by   pressing   button   4:   the  
s

creen   confirms   the   pause.
Pause
If the programmed speed is exceeded, the   displayed   speed   flashes.
Once
  the   speed   of   the   vehicle   returns  
t

o   the   programmed   speed   setting,   the  
d

isplay   becomes   steady   again.
The cruise control is paused
 m

anually
 o

r   by   pressing   the   brake   or   clutch   pedal  
o

r   if   the   ESP   system   is   invoked   for  
s

afety   reasons.
Driving

103
Park Assist
This system provides active assistance with parking, detecting a parking space then controlling the steering to park in the space.
I t   controls   the   steering   while   the   driver   manages   the   accelerator,   brakes,   gears   and   clutch   (manual   gearbox).   During   phases   of   entry   into   and   exit   from  
a

  parking   space,   the   system   provides   visual   and   audible   information   to   the   driver   in   order   to   make   the   manoeuvre   safe.   It   may   be   necessary   to   move  
f

or wards   and   backwards   more   than   once.
The
  Park   Assist   system   cannot   in   any  
c

ircumstances   replace   the   need   for  
v

igilance   on   the   part   of   the   driver.
The
  driver   must   remain   in   control   of  
t

heir   vehicle   ensuring   that   the   space  
r

emains   clear   during   the   manoeuvre.
In
  some   circumstances,   the   sensors  
m

ay   not   detect   small   obstacles   located  
i

n   their   blind   spots. Changing
  tyre   sizes   (out-size   tyres,  
w

inter   tyres,   ...)   can   inter fere   with  
t

he   correct   operation   of   the   parking  
a

ssistance   system.
During
  a   manoeuvre   the   steering   wheel  
t

urns   quickly:   do   not   hold   the   steering  
w

heel,   do   not   place   your   hand   between  
t

he   spokes   of   the   steering   wheel   and  
t

ake   care   with   loose   and   bulky   clothing,  
s

carves,   handbags...   There   is   a   risk   of  
in

jury. For
  entry   into   a   parking   space   (parallel  
p

arking)   the   system   does   not   detect  
s

paces   which   are   clearly   much   smaller  
o

r   larger   than   the   size   of   the   vehicle.
This
  "parking   assistance"   system  
i

s   activated   automatically   during  
m

anoeuvres;   it   is   therefore   possible  
t

hat   a   symbol   comes   on   in   the   screen,  
a

ccompanied   by   an   audible   signal,  
w

ithout   affecting   the   manoeuvre.The
  selection   of   the   type   of   manoeuvre  
(

entering   or   exiting   a   parallel   parking  
s

pace)   prevents   a   change   to   STOP  
m

ode   of   Stop   &   Start.
In
  STOP   mode,   this   selection   restarts  
t

he
 eng
ine.
The
  driver   can   take   control   at   any   time   by   gripping   the   steering   wheel.
The
 
s
ystem  
p
rovides  
a
ssistance  
i
n  
e
ntering  
a
nd  
e

xiting
 a par
king
 spa
ce
 w
hen
 par
allel
 par
king.
5
D

129
Electronic Stability Control (ESC) incorporating the   following   systems:
-
 
a
nti-lock   braking   system   (ABS)   and   the  
e

lectronic   brake   force   distribution   (EBFD),
-
 
e
mergency   braking   assistance   (EBA),
-
 
w
heel   anti-slip   regulation   (ASR)   or   traction  
c

ontrol,
-
 
d
ynamic   stability   control   (DSC).
Electronic stability control (ESC)
Definitions
Anti-lock braking system (ABS)
and electronic brake force
distribution (EBFD)
This system improves the stability and manoeuvrability   of   your   vehicle   when   braking  
a

nd   contributes   towards   improved   control   in  
c

orners,   in   particular   on   poor   or   slippery   road  
su

rfaces.
The
  ABS   prevents   wheel   lock   in   the   event   of  
em

ergency
 b
raking.
The
  electronic   brake   force   distribution   system  
m

anages   the   braking   pressure   wheel   by   wheel.
Emergency braking assistance
(EBA)
In an emergency, this system enables you to reach   the   optimum   braking   pressure   more  
q

uickly   and   therefore   reduce   the   stopping  
di

stance.
It
  is   triggered   according   to   the   speed   at   which  
t

he   brake   pedal   is   pressed.   This   is   felt   by   a  
r

eduction   in   the   resistance   of   the   pedal   and   an  
i

ncrease   in   the   effectiveness   of   the   braking.
Anti-slip regulation (ASR)
The ASR system (also known as Traction Control)   optimises   traction   in   order   to   limit  
w

heel   slip   by   acting   on   the   brakes   of   the   driving  
w

heels   and   on   the   engine.   It   also   improves  
t

he   directional   stability   of   the   vehicle   on  
a

cceleration.
Dynamic stability control (DSC)
If there is a difference between the path followed   by   the   vehicle   and   that   required   by  
t

he   driver,   the   DSC   monitors   each   wheel   and  
a

utomatically   acts   on   the   brake   of   one   or   more  
w

heels   and   on   the   engine   to   return   the   vehicle  
t

o   the   required   path,   within   the   limits   of   the   laws  
o

f   physics.
7
Safety

130
When this warning lamp comes on, coupled   with   the   STOP w arning lam p, a

ccompanied   by   an   audible   signal   and   a
 m

essage,   it   indicates   that   there   is   a   fault
 w

ith   the   electronic   brake   force   distribution
 (

EBFD),   which   could   cause   loss   of   control
 o

f   the   vehicle   when   braking.
Operation
When this warning lamp comes on, accompanied   by   an   audible   signal  
a

nd   a   message,   it   indicates   that   there  
i

s   a   fault   with   the   ABS,   which   could  
c

ause loss of control of the vehicle
when
 b

raking.
Anti-lock braking system (ABS)
and electronic brake force
distribution (EBFD)When changing  w heels  ( tyres  a nd  r ims),  m
ake   sure   that   these   are   approved   for  
y

our   vehicle.
Normal
  operation   of   the   ABS   may   make  
i

tself   felt   by   slight   vibrations   of   the   brake  
ped

al.
In emergency braking, press
very firmly without releasing the
pressure.
You must stop as soon as it is safe to do so.
In
 
both
 
cases,
 
contact
 
a
 
CITROËN
 
dealer
 
or
 
a
 
q

ualified
 w

orkshop.
Safety

131
Dynamic stability control (DSC)
and anti-slip regulation (ASR)The DSC system offers exceptional safety   in   normal   driving,   but   this   should  
n

ot   encourage   the   driver   to   take   extra  
r

isks   or   drive   at   high   speed.
The
  correct   operation   of   the   system  
d

epends   on   observation   of   the  
ma

nufacturer's
 r
ecommendations
 r

egarding   the   wheels   (tyres   and   rims),  
t

he   braking   components,   the   electronic  
c

omponents   and   the   assembly   and  
r

epair   procedures   used   by   CITROËN  
d

ealers.
After
  an   impact,   have   the   system  
c

hecked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Activation
These systems are activated automatically each   time   the   vehicle   is   started.
As
  soon   as   they   detect   a   problem   of   grip   or  
t

rajectory,   these   systems   act   on   the   operation   if  
t

he   engine   and   brakes.
Deactivation
In exceptional conditions (starting a vehicle which   is   bogged   down,   stuck   in   snow,   on   soft  
g

round...),   it   may   be   advisable   to   deactivate  
t

he   DSC   system,   so   that   the   wheels   can   move  
f

reely   and   regain   grip.
This
 
is
 
indicated
 
by
 
flashing
 
of
 
this
 
w

arning
 
lamp
 
in
 
the
 
instrument
 
panel.
Operating fault
But it is recommended that the system be r eactivated   as   soon   as   possible.
F
 
P
ress   the   button.
This warning lamp and the indicator lamp in   the   button   come   on:   the   DSC   system   no l

onger   acts   on   the   operation   of   the   engine.
Reactivation
The system is reactivated automatically each time   the   ignition   is   switched   back   on   or   from  
3

0 mph   (50   km/h).
F
 
P
ress   the   button   again   to  
r

eactivate   it   manually. If
  this   warning   lamp   comes   on,  
a

ccompanied   by   an   audible   signal  
a

nd   a   message,   this   indicates   a   fault  
w

ith   the   system.
Contact   a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   have   the   system   checked.
7
Safety