10-3
Secondary reduction system:
Shaft drive
Secondary reduction ratio: 41/21 × 17/12 × 33/9 (10.142)
Transmission type:
V-belt automatic
Operation: Right hand operation
Reverse gear: 23/14 × 28/23 (2.000)
Low range:
31/16 (1.938)
High range: 31/21 (1.476)
Chassis:Frame type:
Steel tube frame
Caster angle: 5.0 °
Trail: 26.0 mm (1.02 in)Front tire:Type:Tubeless
Size: 25 x 8-12NHS
Manufacturer/model:
MAXXIS/M951Y
Rear tire:Type:Tubeless
Size:
25 x 10-12NHS
Manufacturer/model: MAXXIS/M952YLoading:Maximum loading limit:
YXR7FD 367.0 kg (809 lb)
YXR7FSPD 359.0 kg (791 lb)
YXR700FAD 367.0 kg (809 lb)
(Total weight of rider, passenger, cargo, accessories, and
tongue)Tire air pressure (measured on cold tires):Recommended:Front:
70.0 kPa (0.700 kgf/cm², 10 psi)
Rear: 98.0 kPa (0.980 kgf/cm², 14 psi)
Minimum: Front:63.0 kPa (0.630 kgf/cm², 9 psi)
Rear: 91.0 kPa (0.910 kgf/cm², 13 psi)Front wheel:Wheel type: YXR7FD Panel wheel
YXR7FSPD Cast wheel
YXR700FAD Panel wheel
Rim size:
12 × 6.0AT
1RB7A_EE.book Page 3 Tuesday, April 24, 2012 9:07 AM
10-5
Coolant temperature warning light:
LED
Engine trouble warning light: LED
Parking brake indicator light:
LED
On-Command four-wheel-drive/differential gear lock indica-
tor:
LCD
High-range indicator light: LED
Low-range indicator light: LED
Differential gear lock indicator light:
LED
Helmet/Seat belt indicator light: 14 V, 1.7 W
Fuses:Main fuse:
40.0 A
Fuel injection system fuse: 10.0 A
Headlight fuse: 15.0 A
Signaling system fuse:
10.0 A
Ignition fuse: 10.0 A
Auxiliary DC jack fuse: 10.0 A
Backup fuse:
10.0 A Four-wheel-drive motor fuse:
10.0 A
Radiator fan fuse: 25.0 A
For Europe only
The figures quoted are emission levels and are not
necessarily safe working levels. Whilst there is a
correlation between the emission and exposure
levels, this cannot be used reliably to determine
whether or not further precautions are required.
Factors that influence the actual level of exposure
of work-force include the characteristics of the
work room, the other sources of noise, etc. i.e. the
number of machines and other adjacent process-
es, and the length of time for which an operator is
exposed to the noise. Also the permissible expo-
sure level can vary from country. This information,
however, will enable the user of the machine to
make a better evaluation of the hazard and risk.
1RB7A_EE.book Page 5 Tuesday, April 24, 2012 9:07 AM
