10-1
10
EBU25961
SPECIFICATIONS
Dimensions:Overall length:1700 mm (66.9 in)
Overall width: 990 mm (39.0 in)
Overall height:
980 mm (38.6 in)
Seat height: 685 mm (27.0 in)
Wheelbase: 1080 mm (42.5 in)
Ground clearance:
145 mm (5.7 in)
Minimum turning radius: 2900 mm (114 in)Weight:With oil and fuel:
152.0 kg (335 lb)Noise and vibration level:Noise level (77/311/EEC):78.0 dB(A)@3500 r/min
Vibration on seat (EN1032, ISO5008):
Will not exceed 0.5 m/s²
Vibration on handlebar (EN1032, ISO5008): Will not exceed 2.5 m/s²Engine:Engine type:
Air cooled 4-stroke, SOHC Cylinder arrangement:
Single cylinder
Displacement: 124 cm³
Bore × stroke:
49.0 × 66.0 mm (1.93 × 2.60 in)
Compression ratio:
9.00 : 1
Starting system: Electric starter
Lubrication system: Wet sump
Engine oil:Recommended brand:YAMALUBE
U1PY61E0.book Page 1 Wednesday, March 14, 2012 5:22 PM
10-4
10
Spring/shock absorber type:Coil spring/oil damper
Wheel travel: 70 mm (2.8 in)Rear suspension:Type:Swingarm
Spring/shock absorber type: Coil spring/oil damper
Wheel travel:
80 mm (3.1 in)Electrical system:Ignition system:DC CDI
Charging system:
AC magnetoBattery:Model:12N12C-4A-2
Voltage, capacity:
12 V, 12.0 AhHeadlight:Bulb type:Krypton bulbBulb voltage, wattage × quantity:Headlight:
12 V, 30.0/30.0 W × 2
Tail/brake light: 12 V, 5.0/21.0 W × 1
Neutral indicator light:
12 V, 1.7 W × 1 Reverse indicator light:
12 V, 1.7 W × 1
Fuses:Main fuse:
15.0 AEBU30401For Europe only
The figures quoted are emission levels and are not
necessarily safe working levels. Whilst there is a
correlation between the emission and exposure
levels, this cannot be used reliably to determine
whether or not further precautions are required.
Factors that influence the actual level of exposure
of work-force include the characteristics of the
work room, the other sources of noise, etc. i.e. the
number of machines and other adjacent process-
es, and the length of time for which an operator is
exposed to the noise. Also the permissible expo-
sure level can vary from country. This information,
however, will enable the user of the machine to
make a better evaluation of the hazard and risk.
U1PY61E0.book Page 4 Wednesday, March 14, 2012 5:22 PM