8-16
8
5. Install the drain bolt and its new gasket, and
then tighten the bolt to the specified torque.
6. Refill with the specified amount of the recom- mended transmission oil. NOTICE: Make
sure that no foreign material enters the
transmission case.
[ECB00791]
7. Check the oil filler bolt gasket for damage, and replace it if necessary.
8. Install the oil filler bolt and its gasket, and then tighten the bolt to the specified torque.NOTICEECB01061Make sure that no oil gets on the tires or
wheels.9. Start the engine, and then let it idle for severalminutes while checking the transmission for
oil leakage. If oil is leaking, immediately turn
off the engine and check for the cause.
10. Turn the engine off, and then check the oil lev- el and correct it if necessary.
1. Transmission oil drain bolt
2. GasketTightening torque:Transmission oil drain bolt:23 Nm (2.3 m·kgf, 17 ft·lbf)
12
Recommended transmission oil: See page 10-1.
Oil quantity: 0.6 L (0.63 US qt, 0.53 Imp.qt)
Tightening torque: Transmission oil filler bolt:23 Nm (2.3 m·kgf, 17 ft·lbf)
U1PY61E0.book Page 16 Wednesday, March 14, 2012 5:22 PM
