2013 TOYOTA xD lights

280 4-3. Do-it-yourself maintenance
Scion_xD_OM_OM52C62U_(U)
■Under the driver’s side instrument panel
Fuse nameAmpereCircuit
1 TAIL 10 A Tail lights, parking lights,
license plate lights
2 PANEL1 7.5 A Switch illuminations, instrument
cluster lights, steering switches,
gauges and meters
3 A/C 7.5 A Air conditioning system, rear win-
dow defogger
4 D DOOR 20 A Power windows
5 RL DOOR 20 A Power windows (rear left)
6 RR DOOR 20 A Power windows (rear right)
7 CIG 15 A Power outlet
8 ACC 7.5 A Outside rear view mirrors,
clock
9 ID/UP / MIR
HTR
*110 A Outside rear view mirror defoggers

281
4-3. Do-it-yourself maintenance
4
Maintenance and care
Scion_xD_OM_OM52C62U_(U)
*1: Vehicles sold in Canada
Fuse nameAmpereCircuit
10 IGN 7.5 A Multi-port fuel injection system/
sequential multi-port fuel injection
system
11 MET 7.5 A Gauges and meters
12 WIP 20 A Windshield wipers
13 RR WIP 15 A Rear window wiper
14 WSH 15 A Windshield washers, rear window
washer
15 ECU-IG 10 A ABS, electric cooling fan, EPS
16 GAUGE 10 A Charging system, back-up lights,
air conditioning system, gauges
and meters
17 OBD2 7.5 A On-board diagnosis system
18 STOP 10 A Stop lights, high mounted stop-
light, multi-port fuel injection sys-
tem/sequential multi-port fuel
injection system, ABS, VSC, shift
lock system
19 D/L 25 A Power door lock system
20 FR FOG 15 A No circuit
21 AM1 25 A “ACC”, “CIG” fuses

283
4-3. Do-it-yourself maintenance
4
Maintenance and care
Scion_xD_OM_OM52C62U_(U)
■
After a fuse is replaced
● If the lights do not turn on even after the fuse has been replaced, a bulb
may need replacement. ( P. 284)
● If the replaced fuse blows again, have the vehicle inspected by your
Scion dealer.
■ If there is an overload in the circuits
The fuses are designed to blow, protecting the wiring harness from damage.
CAUTION
■To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failing to do so may cause damage to the vehicle, and possibly a fire or
injury.
● Never use a fuse of a higher amperage rating than that indicated, or use
any other object in place of a fuse.
● Always use a genuine Scion fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
● Do not modify the fuse or the fuse box.
NOTICE
■Before replacing fuses
Have the cause of electrical overload determined and repaired by your Scion
dealer, as soon as possible.

285
4-3. Do-it-yourself maintenance
4
Maintenance and care
Scion_xD_OM_OM52C62U_(U)
■
Rear bulb locations
Back-up light
License plate lights
Stop/tail and
rear side
marker light
Rear turn signal light

286 4-3. Do-it-yourself maintenance
Scion_xD_OM_OM52C62U_(U)
Replacing light bulbs■ Headlights and daytime running lights (for Canada)
Unplug the connector and
remove the rubber cover.
Release the bulb retaining
spring.
Remove the bulb.
To install a new bulb, align the
tabs of the bulb with the cutouts
of the mounting hole.
STEP 1
STEP 2
STEP 3

287
4-3. Do-it-yourself maintenance
4
Maintenance and care
Scion_xD_OM_OM52C62U_(U)
■
Front turn signal lights
Turn the bulb base counterclock-
wise.
Remove the light bulb.
STEP 1
STEP 2

288 4-3. Do-it-yourself maintenance
Scion_xD_OM_OM52C62U_(U)
■Parking lights
Turn the bulb base counterclock-
wise.
Remove the light bulb.
STEP 1
STEP 2

289
4-3. Do-it-yourself maintenance
4
Maintenance and care
Scion_xD_OM_OM52C62U_(U)
■
Front side marker lights
Turn the bulb base counterclock-
wise.
Remove the light bulb.
STEP 1
STEP 2