144 2-2. Instrument cluster
Scion_xD_OM_OM52C62U_(U)
■Indicators
The indicators inform the driver of the operating state of the
vehicle’s various systems.
*1: These lights turn on when the engine switch is turned to the “ON” posi-
tion to indicate that a system check is being performed. They will turn
off after the engine is started, or after a few seconds. There may be a
malfunction in a system if a light does not come on, or if the lights do
not turn off. Have the vehicle inspected by your Scion dealer for
details.
*2: The light flashes to indicate that the system is operating.
Turn signal indicator
(P. 138)
(U.S.A.)
Headlight indicator
(P. 150)
Headlight high beam
indicator ( P. 152)
(Canada)
Tail light indicator
(P. 150)
Slip indicator ( P. 164)Low engine coolant
temperature indicator
VSC OFF indicator
(P. 165)Cruise control indicator
(P. 159)
(vehicles with an automatic transmission)
“TRAC OFF” indicator
(P. 165)
“AIR BAG ON” and “AIR
BAG OFF” indicator
(P. 88)
*1, 2
*1
Shift position
indicators
*1
*1
152 2-3. Operating the lights and Windshield wipers
Scion_xD_OM_OM52C62U_(U)
Turning on the high beam headlightsWith the headlights on, push
the lever away from you to
turn on the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
Pull the lever toward you and
release it to flash the high
beams once.
You can flash the high beams
with the headlights on or off.
■Daytime running light system (if equipped)
● To make your vehicle more visible to other drivers, the headlights turn on
automatically (at a reduced intensity) whenever the engine is started and
the parking brake is released. Daytime running lights are not designed for
use at night.
● Compared to turning on the headlights, the daytime running light system
offers greater durability and consumes less electricity, so it can help
improve fuel economy.
■ Light reminder buzzer
A buzzer sounds when the driver’s door is opened with the key removed
from the engine switch while the lights are turned on.
NOTICE
■To prevent battery discharge
Do not leave the lights on longer than necessary when the engine is not run-
ning.
