2013 TOYOTA RAV4 brake

[x] Cancel search: brake

Page 189 of 624

TOYOTA RAV4 2013 XA40 / 4.G Owners Manual RAV4_OM_OM42809U_(U)
1894-1. Before driving
4
Driving
●As stopping distance is increased when towing a trailer, vehicle-to
vehicle distance should be increa sed. For each 10 mph (16 km/h)
of speed,

Page 190 of 624

TOYOTA RAV4 2013 XA40 / 4.G Owners Manual 190
RAV4_OM_OM42809U_(U)
4-1. Before driving
●Due to the added load of the trailer, your vehicle’s engine may over-
heat on hot days (at temperatures over 85  F [30 C]) when driving
up a lon

Page 192 of 624

TOYOTA RAV4 2013 XA40 / 4.G Owners Manual 192
RAV4_OM_OM42809U_(U)
4-1. Before driving
■Break-in schedule
If your vehicle is new or equipped with any new power train components
(such as an engine, transmission, differ ential or wheel bearin

Page 193 of 624

TOYOTA RAV4 2013 XA40 / 4.G Owners Manual RAV4_OM_OM42809U_(U)
1934-1. Before driving
4
Driving
●After the trailer swaying has stopped:
• Stop in a safe place. Get all occupants out of the vehicle.
• Check the tires of the vehicle and t

Page 194 of 624

TOYOTA RAV4 2013 XA40 / 4.G Owners Manual 194
RAV4_OM_OM42809U_(U)
4-1. Before driving
CAUTION
●Do not apply the brakes suddenly as you may skid, resulting in jackknifing
and loss of vehicle control. This is especially true on wet or slippe

Page 195 of 624

TOYOTA RAV4 2013 XA40 / 4.G Owners Manual RAV4_OM_OM42809U_(U)
1954-1. Before driving
4
Driving
CAUTION
■When towing a trailer
Toyota recommends trailers with brakes that conform to any applicable fed-
eral and state/provincial regulations.

Page 197 of 624

TOYOTA RAV4 2013 XA40 / 4.G Owners Manual 197
RAV4_OM_OM42809U_(U)
4-2. Driving procedures
4
Driving
Engine (ignition) switch (vehicles without a 
smart key system)
Check that the parking brake is set.
Check that the shift lever is set in P.

Page 200 of 624

TOYOTA RAV4 2013 XA40 / 4.G Owners Manual 200
RAV4_OM_OM42809U_(U)
4-2. Driving procedures
Engine (ignition) switch (vehicles with a 
smart key system)
Check that the parking brake is set.
Check that the shift lever is set in P.
Firmly depres