2013 TOYOTA MATRIX Owners Manual

201 3-2. Using the audio system
3
Interior features
CAUTION
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment and meets RSS-102 of the IC radio frequency
(RF) Exposure rules. This equipment has very low levels of RF energy that it
deemed to comply without maximum permissive exposure evaluation
(MPE). But it is desirable that it should be installed and operated keeping the
radiator at least 20cm or more away from person's body (excluding extremi-
ties: hands, wrists, feet and ankles).
Cet équipement est conforme aux limites d’exposition aux rayonnements
énoncées pour un environnement non contrôlé et respecte les règles
d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet
équipement émet une énergie RF très faible qui est considérée conforme
sans évaluation de l’exposition maximale autorisée.
Cependant, cet équipement doit être installé et utilisé en gardant une
distance de 20 cm ou plus entre le dispositif rayonnant et le corps (à
l’exception des extrémités : mains, poignets, pieds et chevilles).

202 3-2. Using the audio system
NOTICE
■To prevent battery discharge
Do not leave the audio system on longer than necessary with the engine off.
■To avoid damaging the audio system
Take care not to spill drinks or other fluids over the audio system.

203
3-2. Using the audio system
3
Interior features
Using the radio
Ty p e A
Ty p e B
Vo lu m e
Seeking the
frequencyStation selector
AM/FM
mode buttonsAdjusting the
frequency Power
Scanning for receivable stations
Power VolumeAdjusting the
frequency or
selecting items
Seeking
the frequency
AM/FM mode button Scanning for
receivable stationsStation selector
Displays text message

204 3-2. Using the audio system
Setting station presets
Type A
Search for desired stations by turning or pressing “
” or
“” on .
Press and hold the button (from to ) the station
is to be set to until you hear a beep.
Type B
Search for desired stations by turning or pressing “
”
or “” on .
Press and hold a button (from to ) until you hear
a beep.
Scanning radio stations
■Scanning the preset radio stations
Press and hold or until you hear a beep.
Preset stations will be played for 5 seconds each.
When the desired station is reached, press or
once again.
■Scanning all radio stations within range
Press or .
All stations with reception will be played for 5 seconds each.
When the desired station is reached, press or
once again.
STEP1
STEP2
STEP1
STEP2
STEP1
STEP2
STEP1
STEP2

205 3-2. Using the audio system
3
Interior features
Switching the display
Type A
Press .
Each time is pressed, the display changes in the following order:
Title (song/program title) Name (artist name/feature)Title (song/pro-
gram title).
Type B
Press .
If the text continues past the end of the display, “ ” is displayed. Press
.
■Reception sensitivity
●Maintaining perfect radio reception at all times is difficult due to the con-
tinually changing position of the antenna, differences in signal strength
and surrounding objects, such as trains, transmitters, etc.
●The radio antenna is mounted on the rear roof. The antenna can be
removed from the base by turning it.
■Certifications for the radio tuner
This device complies with Part 15 of the FCC Rules and RSS-210 Rules.
Operation is subject to the following two conditions; (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CAUTION
■FCC WARNING
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.

206 3-2. Using the audio system
NOTICE
■To prevent damage, remove the antenna in the following cases.
●The antenna will touch the ceiling of a garage.
●A cover will be put on the roof.

207
3-2. Using the audio system
3
Interior features
Using the CD player
Ty p e A
Ty p e B
Vo lu m e
Random playback Selecting a trackRepeat play
Playback Power
CD eject
Displays text
message
Search playbackReverse
Fast-forward
Power Volume
Search playbackCD eject
Displays text message PlaybackSelecting a
track or displays
track list
Repeat playRandom playback
Selecting a
track
Reverse
Fast-forward

208 3-2. Using the audio system
Loading CDs
Insert a CD.
Ejecting CDs
Press or and remove the CD.
Selecting a track
Type A
Press “
” to move up or “” to move down using until the desired
track number is displayed.
Type B
Turn or press “
” to move up or “” to move down using
until the desired track number is displayed.
Fast-forwarding and reversing tracks
Type A
Press (reverse) or
(fast-forward).
Type B
To fast-forward or reverse, press ( ) or
().