2013 SSANGYONG KORANDO low beam

8310-00
3. MAJOR CHANGES
Front side
Headlamp
- Headlamp (high/low beam) dualized and tail lamp changed to LED type
Fog lamp
- Fog lamp design changed
Headlamp
(high/low beam)Turn signal lamp
Tail lampTurn signal lamp
Tail lamp,
DRL (EU)*
Headlamp
(high beam)
Headlamp
(low beam)

1. EXTERIOR LAMP
1) Overview
Exterior lamps can be divided into front, rear and side lamps as follows.
Front lamp: headlamp and fog lamp
Rear lamp: combination lamp, license lamp, high mounted stop lamp and reflex reflector lamp
Side lamp: outside turn signal lamp and puddle (approach) lamp -
-
-
2) Layout
Front side
Outside turn signal lamp and
puddle lamp
HeadlampFog lamp
Turn signal lamp
Headlamp
(high beam)Headlamp
(low beam)
Puddle lamp
Outside turn
signal lamp
Fog lamp
Tail lamp,
DRL (EU)*

3) Operating Process
(1) Headlamp (high/low beam) operation process
The headlamp is usually operated by the multifunction switch or by the REKES or smart key through the
BCM.
The BCM controls the headlamp and tail lamp according to the signal from the AUTO light sensor
through LIN communication when the multifunction switch is in "AUTO" position.
Headlamp - low beam
Headlamp - high beam
DRL (Day Time Running Light)
DRL is the function to turn on the high beam and tail lamp without any intervention from the light
switch. DRL turns off the lamps when turning off the light switch. This is an additional safety device to
prevent the accident.

(4) License lamp operation process
When the corresponding lamp comes on and
goes off by operating the tail lamp, AUTO light,
high beam and low beam on the multifunction
switch, the license lamp also does.