2013 SKODA OCTAVIA ECO mode

■Speed-dependent vol. adjustment - Speed-dependent volume increase
■ AUX volume - Sets playback volume via an external source
■ Quiet - Low volume
■ Medium - Medium volume
■ Loud - High volume
■ Bluetooth audio - Sets the playback volume via Bluetooth ®
■ Quiet - Low volume
■ Medium - Medium volume
■ Loud - High volume
Radio settings
First read and observe the introductory information given on page 11.
›
Press the button SETUP
→ Radio setup .
■ Radio text - Radio text display on/off
■ Alternative frequency (AF) - Search for alternative frequencies of the station
currently being listened to on/off
■ Arrow keys - Sets the station selection function in RADIO mode
■ Station list - Switches all stations currently in range for the selected fre-
quency band
■ Preset list - Switches only stored stations in the selected frequency band
■ RDS regional - Switches the automatic tracking of related regional stations on/
off ■ Fixed - The selected regional station is kept permanently (another regional
station must be set manually if signal is lost)
■ Automatic - Automatic tracking of regional stations (the device will automati-
cally switch to another available regional station if reception is lost in the re-
gion in question)
■ PTY filter - Selects radio stations by programme type
■ Off - Switches off
■ News - News
■ Music - Music
■ Sport - Sports
■ Culture - Culture
■ Special - Other

■
Station list sort - Sorts the sorted stations
■ Default - by the programme identification (PI code)
■ A-Z - In alphabetical order and also based on the frequency number (if the sta-
tion name changes during the programme, it can be displayed just at the end
of the list)
■ Name of station - Displays the station name
■ Variable - Allows changes to the station name
■ Fixed - The station name is fixed (for the A-Z listing)
■ Delete presets - Deletes the stored stations
Note
■
The Radio Data System (RDS) is used to transfer additional information. The
RDS enables program identification, program type identification (PTY), the recep-
tion of traffic reports (TP) or automatic station tracking, for example. If there is
sufficient reception, RDS-compatible radio stations will be displayed by station
name rather than station frequency.■
The Alternative frequency (AF) function ensures that the best receivable fre-
quency for the selected station is set automatically.
■
The device may not be fully functional in countries where RDS is not adequately
supported. We therefore recommend switching off the RDS regional setting as
well as the Alternative frequency (AF) setting, f applicable. Otherwise, these set-
tings can affect the functionality of the radio.

Media settings
First read and observe the introductory information given on page 11.
›
Press the button SETUP
→ Media .
■ Activate AUX - Switches activation of AUX input on/off
■ Mix/Repeat including subfolders - Switches on/off playback of the tracks in Mix
and Repeat modes including subfolders
■ Display ID3 tags - Switches on/off display of the artist, album and track name in
the device display screen 1)
■ Bluetooth audio - Switches on/off activation of the external audio source via
Bluetooth ®


1)
Regardless of the setting, the ID3 tag is always displayed in the Audio menu in the MAXI DOT display.
12Introductory information

Audio
Radio
Introduction
This chapter contains information on the following subjects:
Main menu
16
Find and store radio station
16
Select frequency band and radio station
17
Switching traffic programme TP on/off
18
First and foremost, pay attention to the safety instructions » page 4 , Important
notes .
The device allows reception of radio stations in from FM or AM frequency ranges
as well as additional information from RDS broadcasts in the FM range.

Main menu
First read and observe the introductory information given on page 16.
Accessing radio mode in main menu
›
Press the RADIO button.
The most recently tuned radio station plays.
Symbols in the display
SymbolMeaningSound is mutedTraffic information station Station without traffic information ,  ,  , Currently selected frequency band and memory group a)Radio station is selected based on desired station top-
ic » page 12 , Radio settingsSymbolMeaningRadio station from the station list is a station from the
preset list Auto-play function for available radio stations for 10 sec-
ondsa)
PTY (programme type) - Refers to the type of the programme transmitted by the radio station.

Find and store radio station
First read and observe the introductory information given on page 16.
If no memory group is displayed for the frequency bands,
›
press the RADIO button
→ menu button
2
» Fig. 1 on page 5.
Station searches are affected by selection of the PTY filter » page 12 and by
switching on/off of the TP function.
Search options
■ TP - Switches traffic programme on/off » page 18
■ Manual - Manual station search
■ Scan - Successive play of all receivable stations in the current frequency band or
the current station buttons for five seconds each ■ OK - Stops auto-play function at the current radio station
■ Skip - Selects another radio station
■ Auto store - Automatic station search
Manual station search
Pressing the Manual button starts a manual station search.
Manual tuning is performed by turning the menu button
2
» Fig. 1 on page 5 or
the keys  .
Pressing the OK button stops the manual station search at the currently tuned
radio station.
Automatic station search
Pressing the Auto store key starts an automatic station search.
Auto store... is displayed on the device display screen when searching and stor-
ing.
At the end of the automatic search, the five radio stations with the strongest sig- nal are stored in the memory group for the current frequency band. 
16Audio

Select sourceFig. 8
Main menu/CD mode
First read and observe the introductory information and safety warn-
ings
on page 18.
Accessing main menu in media mode
›
Press the button MEDIA.
Selecting the audio source ■ CD - Changes to an inserted CD » page 21
■ SD - Changes to an inserted SD memory card 1)
» page 22
■ USB - Changes to a connected external audio source at the USB in-
put 1)
» page 23
■ AUX - Changes to an external audio source connected to the AUX in-
put » page 23
■ BT - Changes to a connected external audio source via Bluetooth ®
1)
» page 23
Symbols in the displaySymbolImportanceSound is mutedA CD is inserted in the device driveDisplays a connected Bluetooth ®
device / Repeat track or folderRandom play ,  ,  ,  , Currently selected audio sourceAuto-play function for 10 seconds

Sources and file formats supported
First read and observe the introductory information and safety warn-
ings
on page 18.
Supported sources
SD memory cardSD, SDHC, SDXCCD driveAudio CD (up to 80 min), CD-R and CD-RW (with a capacity
of up to 700 MB)USB devicesUSB stick, USB MP3 player, HDD (without special software)Other external
sourcesPortable playback devices with AUX connection, MTP (MSC)
players, Bluetooth ®
players
At the time of publication, the device has been tested with most products and
media available in the various markets. However, it is possible that some devices,
media or files will be unreadable or unplayable.
Supported files
Audio filesCodec type (file
formats)MPEG-1/2 (layer 3)Windows Media Audio 7, 8, 9 and 10File suffixmp3wmaPlaylistsm3u, pls, wpl, m3u8; asx 
1)
Operating an external audio source is possible only with certain restrictions and depends on the type
of connected device.
19Audio

Button ActionFunctionPress brieflyScrolling down in folders
Button 
ActionFunctionPress brieflyScrolling up in folders

Setting additional functions
First read and observe the introductory information and safety warn-ings
on page 18.
› Press the button
MEDIA
→ menu knob
2
» Fig. 1 on page 5.
■ TP - Switches traffic programme on/off
■  - Displays the artist, album and track name from ID3 tag 1)
■ Repeat - Sets repeat play
■ Off - Switches repeat function off
■ Track - Repeats the current track
■ Folder - Repeats all tracks in folder
■ Mix - Random play
■ Off - Random play function off
■ All - Sets random playback of all tracks on the current audio source
■ Folder - Repeats all tracks in folder
■ Scan - Consecutive playback of the tracks for 10 seconds
■ OK - Stops auto-play function at the current track
■ Skip - Selects another track
■ Cancel - Changes to the track played originally

CD
First read and observe the introductory information and safety warn-ings
on page 18.
The device can be used to play audio files saved on a CD.
The internal drive can only be used to play audioCDs (CD-A), CD-Rs and CD-RWs.
Inserting›With the labelled side facing up, insert a CD into the CD slot 12 » Fig. 1 on page 5
until it is automatically drawn in. The play function will start automatically.
Ejecting›
Press the  button – the CD is ejected.
If the ejected CD is not removed within 10 seconds, it is retracted again for safety
reasons. The play function will not start automatically.
WARNINGThe CD player is a laser product. On the manufacturing date, this unit was classified as a class 1 laser product in accordance with the national/interna-
tional standards DIN EN 60825-1: 2008-05 and DHHS Rules 21 CFR,
Subchapter J classified as a class 1 laser product. The laser beam used in this
class 1 laser product is so weak that it poses no risk when operated correctly.
This product is designed such that the laser beam is restricted to the inside of
the device. However, this does not mean that the integrated laser could be
classified as a higher class laser product were the housing to be removed. For
this reason, never remove the housing from the device.
CAUTION
■ Never place DVDs into the internal drive, as this may cause irreparable damage
to the device.■
Never insert CDs with the designation “ Do not insert in drives without a draw-
er ” into the internal drive or use “ EcoDiscs” in the internal drive.
■
After pressing the  button , there is a delay of a few seconds before the CD is
ejected. During this time, the barrier to the CD slot is open.
■
Be sure to wait until the CD has been fully ejected before you try to insert a new
CD. Failure to do so can cause damage to the device drive.
■
If the CD has mechanical damage, is not readable or is inserted incorrectly, the
following message is displayed: CD functionality is restricted. Check the CD and
insert it properly into the drive. If the message is displayed again, try using anoth-
er CD or visit a specialist garage if necessary.
■
If the inside temperature of the device is too high, no CDs will be accepted. The
device switches to the last active operating mode.
■
Never use liquids such as benzine, paint thinner or record cleaner to clean the
surface of the CD, as this may cause damage. 
1)
If there are no artist, album and track names available in the file being played, the folder or file name
is displayed.
21Audio

■Never expose the CD to direct sunlight.■Only write on the CD with appropriate writing tools.■
Do not stick anything to the CD!
Note
■Poor or unpaved road surfaces and severe vibrations may cause the CD to jump.■Damp (condensation) may affect the device in cold weather or after showers.
This can lead to playback jumps or impair the play function. In such cases, wait
until the moisture has dissipated.■
If a CD is dirty, it should never be cleaned using a circular motion, but rather
from the inside out. Use a soft, lint-free cloth for cleaning. In the case of heavy
contamination, we recommend cleaning the CD with a standard CD cleaner and
leaving to dry.
■
In certain circumstances, CDs protected by copyright or self-made CD-Rs and
CD-RWs may not play, or may only play to a limited extent.
■
The national copyright laws that apply in your country must be observed.
■
The CD player does not include any parts that need to be serviced or repaired. In
the case of a defective CD player, please visit a specialist garage.

SD memory card
First read and observe the introductory information and safety warn-ings
on page 18.
The device can be used to play audio files saved on an SD memory card.
Inserting an SD memory card
›
Push the SD memory card into the memory card slot
14
with the cut-off edge to
the front right until it “locks into place” » Fig. 1 on page 5. The play function will
start automatically.
Removing an SD memory card
›
Press the SETUP button
→ System → Remove SD card safely .
›
Press the inserted SD memory card. The SD memory card moves into the eject
position.
SD memory card empty or data not readable
If an SD memory card is inserted and no data or no legible data has been stored
on the card, the device will not be switched to the SD memory card mode after
loading.
Due to differing quality requirements from different card manufacturers, it is not
always possible to guarantee the playback from SD memory cards.
It may not be possible to play some or all files on the SD memory card, or their
playback may be limited.
CAUTION
■ Only use one-part SD memory cards. If using an SD memory card with an adapt-
er (multipart SD memory cards), vehicle vibrations can cause the SD memory card can fall out of the adapter while driving, and individual card parts can remainstuck in the device.■
We recommend using SD memory cards of class 4 and higher. This guarantees
the fastest possible access to the audio files.
■
Always store the SD cards in suitable cases to protect them from dirt, dust and
other forms of damage.

Bluetooth ®
player
First read and observe the introductory information and safety warn- ings
on page 18.
Audio files can be played and managed on the device via the A2DP and AVRCP
Bluetooth ®
player profiles (audio streaming).
Conditions for successful connection and playback. The Bluetooth ®
player must be paired with your device » page 27.
The audio files must have one of the supported formats » page 19.
Note
■
Bluetooth profiles A2DP and AVRCP (1.0 - 1.3) are supported.■We recommend adjusting the volume on the portable player to the maximum
level.■
The supported playback functions depend on the type of Bluetooth ®
player be-
ing used.

22Audio

Vehicle systems
Vehicle settings
Introduction
This chapter contains information on the following subjects:
Selecting driving mode
33
Driving assistants
34
Deactivating traction control (ASR)
35
Stabilisation control (ESC)
35
Speed limit for winter tyres
35
Lights
35
Vision
35
Opening and closing
36
Seats
36
Setting Climatronic
36
Auxiliary heating and ventilation
37
Vehicle status
37
Details of the multifunction display
38
Service
38
Resetting to factory settings
38
First and foremost, pay attention to the safety instructions » page 4 , Important
notes .
Settings relating to the vehicle systems can only be made when the ignition is
switched on.
Note
■ The individual systems are described in the » Vehicle Owner's Manual .■For safety reasons, if any system functions are disabled, then some functions,
such as parts of the ESC system, are automatically enabled again after switching
the ignition off and on.

Selecting driving modeFig. 14
Button for selecting the driving mode Octavia, Octavia Combi / Octa-
via RS, Octavia Combi RS
First read and observe the introductory information given on page 33.
The menu for selecting the driving mode allows you to set the vehicle to one of
the three preset driving modes (Normal, Sport and Eco), or to the Individual driv-
ing mode, which allows customised settings to be applied.
If a driving mode other than Normal is selected, then the symbol 
or
 » Fig. 14 lights up on the button.
Call up the main menu
›
Press the button 
or 
» Fig. 14 .
■ Normal - Activates Normal mode
■ Info - Displays the mode settings
■ Sport - Activates Sport mode
■ Info - Displays the mode settings
■ Eco - Activates the fuel-saving mode
■ Info - Displays the mode settings
■ Individual - Activates the Individual mode
■ Settings - Individual settings
■ Steering action - Sets the power steering characteristics
■ Normal - Normal
■ Sport - Sports
■ Engine - Sets the engine (drive) characteristics
■ Normal - Normal
■ Sport - Sports
■ Eco - Economical 
33Vehicle systems

■ACC driving programme - Sets the vehicle acceleration when adaptive cruise
control is activated ■ Normal - Normal
■ Sport - Sports
■ Eco - Economical
■ Advanced FrontLighting System (AFS) - Sets the characteristics of the
adaptive headlights
■ Normal - Normal
■ Sport - Sports
■ Eco - Economical
■ Air conditioning - Sets the characteristics of Climatronic
■ Normal - Normal
■ Eco - Economical
■ Reset - Sets the mode to Normal
Note
If the device is not operated for longer than 10 seconds in the "Select driving
mode" main menu, it will switch to the most recently selected menu or switch it-
self off.
Driving assistants
Fig. 15
Parking assistance: illustrations
First read and observe the introductory information given on page 33.
Parking assistance: Explanation of graphic
Obstacle detected in the scanned area (the vehicle can still continue to travel
in the direction of the obstacle)
Obstacle detected in the collision area (do not continue to drive in the direc- tion of the obstacle)
More information on the parking assistance can be found in the » Vehicle Owner's
Manual , chapter Assistance systems .
›
Press the button CAR
→ Assistants .
■ Front Assist - Sets the assistant for distance monitoring to the vehicles ahead
■ Active - Activate/deactivate the assistant
■ Advance warning - Activate/deactivate advance warning
■ Display distance warning - Activate/deactivate distance warnings
■ ACC (adaptive cruise control) - Sets the adaptive cruise control
■ Distance - Sets the distance monitoring to the vehicles ahead
■ Very close - Very small distance
■ Close - Small distance
■ Medium - Medium distance
■ Far - Large distance
■ Very far - Very large distance
■ Last distance selected - Last selected distance on/off
■ Driving programme - Sets the vehicle acceleration when adaptive cruise con-
trol is active 1)
■ Normal - Normal
■ Sport - Sports
■ Eco - Economical
■ Park Assist - Sets the park assistance
■ Front volume - Adjusts the volume of the front sensors
■ Front tone setting - Adjusts the tone of the front sensors
■ Rear volume - Adjusts the volume of the rear sensors
■ Rear tone setting - Adjusts the tone of the rear sensors
■ Audio lowering - Lowers the volume
■ Off - No lowering of the volume
■ Light - Light lowering of the volume
■ Medium - Medium lowering of the volume
■ Strong - Strong lowering of the volume 

AB1)
This can be set in the menu on vehicles with a travel mode option
» page 33, Selecting driving mode .
34Vehicle systems

■ProActive passenger protection - Activate/deactivate proactive passenger pro-
tection
■ Fatigue detection - Activate/deactivate the driver alert system
Deactivating traction control (ASR)
First read and observe the introductory information given on page 33.
›
Press the CAR button
→ ASR off - Switches deactivation of traction control
(ASR) on/off.

Stabilisation control (ESC)
First read and observe the introductory information given on page 33.
›
Press button CAR
→ Stabilisation control (ESC) 1)
.
■ Activated - Switch on all components of the ESC system
■ ASR off - Switch off the ASR system
■ ESC Sport - activation of ESC Sport

Speed limit for winter tyres
First read and observe the introductory information given on page 33.
›
Press the button CAR
→ Winter tyres limit .
■ Winter tyres warning - Switches the winter tyres warning function on/off
■ Warning at: ... km/h - Sets the speed for the warning
Note
This function is, for example, used for winter tyres where the maximum permissi-
ble speed is lower than the maximum speed of the vehicle.
Lights
First read and observe the introductory information given on page 33.›
Press the button CAR
→ Lights .
■ Light Assist - Sets the light assist
■ Switch-on time - Sets the sensibility of the light sensor against the change in
intensity of the ambient light
■ Early - High sensibility
■ Medium - Medium sensibility
■ Late - Low sensibility
■ Head Light Assist - Switch on/off the head light assist
■ Automatic headlight control (rain) - Activate/deactivate automatic headlight
control in rain
■ Daytime running lights - Activate/deactivate daytime running lights
■ Lane change flash - Activate/deactivate lane change flashing
■ Travel mode - Travel mode on/off
■ Left-hand traffic - For left-hand traffic
■ Right-hand traffic - For right-hand traffic
■ Interior lighting - Sets the interior lighting
■ Instrument lighting - Sets the brightness of the instrument/switch lighting
■ Footwell light - Sets the brightness of the footwell light
■ Coming home - Activates/deactivates the function and sets the illumination pe-
riod after leaving the vehicle (5-30 seconds)
■ Leaving home - Activates/deactivates the function and sets the illumination pe-
riod after locking the vehicle (5-30 seconds)

Vision
First read and observe the introductory information given on page 33.
›
Press the button CAR
→ Vision . 

1)
Applies to vehicles with the function ESC sport.
35Vehicle systems