2013 RENAULT SCENIC Electrical Equipment Immobiliser Workshop Manual

82A-33
AFTER REPAIRDeal with any faults displayed by the diagnostic tool.
Clear the faults from the computer memory using command RZ001 Fault memory.
V1 MR-372-J84-82A000$110.mif
ENGINE IMMOBILISER
Fault finding – Fault finding chart82A
SVT
Vdiag No.: 04
ALP1
CONTINUED 2
For MASTER II:
–BP between components 2186 and 1016 (+ before ignition feed),
–AP between components 2186 and 1016 (+ after ignition feed),
–Earth of component 2186.
For KANGOO VLL:
–BP3 and BP10 between components 2186 and 260 (+ before ignition feed),
–AP10 between components 2186 and 260 (+ after ignition feed),
–NA of component 2186.
If the connection or connections are faulty and there is a repair method (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise replace the wiring.

82A-34
AFTER REPAIRDeal with any faults displayed by the diagnostic tool.
Clear the faults from the computer memory using command RZ001 Fault memory.
V1 MR-372-J84-82A000$110.mif
ENGINE IMMOBILISER
Fault finding – Fault finding chart82A
SVT
Vdiag No.: 04
ALP1
CONTINUED 3
Check that the anti-theft tracking unit, component code 2186, is correctly supplied on the following connections:
For LOGAN, SANDERO, DUSTER, THALIA 2/SYMBOL 2, CLIO II F6:
–BP56 on component 2186 (+ before ignition feed),
–AP10 on component 2186 (+ after ignition feed).
For MEGANE II and SCENIC II:
–BP32 on component 2186 (+ before ignition feed),
–AP43 on component 2186 (+ after ignition feed).
For MASTER II:
–BP on component 2186 (+ before ignition feed),
–AP on component 2186 (+ after ignition feed).
For KANGOO VLL:
–BP3 and BP10 between components 2186 and 260 (+ before ignition feed),
–AP10 between components 2186 and 260 (+ after ignition feed),
If the connection or connections are faulty and there is a repair method (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise replace the wiring.
If the fuses are faulty in the passenger compartment fuse and relay box, component code 260 for MEGANE II,
SCENIC II and KANGOO VLL or component code 1016 for LOGAN, SANDERO, DUSTER, MASTER II, THALIA
2/SYMBOL 2, CLIO II F6, replace them.

82A-35
AFTER REPAIRDeal with any faults displayed by the diagnostic tool.
Clear the faults from the computer memory using command RZ001 Fault memory.
V1 MR-372-J84-82A000$110.mif
ENGINE IMMOBILISER
Fault finding – Fault finding chart82A
SVT
Vdiag No.: 04
ALP1
CONTINUED 4
Check the continuity and insulation of the following connections:
For LOGAN, SANDERO and DUSTER:
–BP56 between components 225 and 1016 (+ before ignition feed),
–AP10 between components 225 and 1016 (+ after ignition feed),
–NC (left-hand drive) or MAM and NC (right-hand drive) of component 225.
For MEGANE II and SCENIC II:
–BP32 between components 225 and 260 (+ before ignition feed),
–AP43 between components 225 and 1337 (+ after ignition feed),
–MAM and NAM of component 225.
For MASTER II:
–BCP3 between components 225 and 1016 (+ before ignition feed),
–AP21 between components 225 and 1016 (+ after ignition feed),
–NC and MQ (left-hand drive) or NJ and MQ (right-hand drive) of component 225.
For THALIA 2/SYMBOL 2 and CLIO II F6:
–BP10 between components 225 and 1016 (+ before ignition feed),
–AP10 between components 225 and 1016 (+ after ignition feed)
,
–N and M of component 225.
For KANGOO VLL:
–BP10 between components 225 and 260 (+ before ignition feed),
–AP10 between components 225 and 260 (+ after ignition feed),
–MK and NA of component 225.
If the connection or connections are faulty and there is a repair method (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise replace the wiring.

82A-36
AFTER REPAIRDeal with any faults displayed by the diagnostic tool.
Clear the faults from the computer memory using command RZ001 Fault memory.
V1 MR-372-J84-82A000$110.mif
ENGINE IMMOBILISER
Fault finding – Fault finding chart82A
SVT
Vdiag No.: 04
ALP1
CONTINUED 5
Check the continuity and insulation of the following connection:
•HK between components 225 and 2186.
If the connection is faulty and there is a repair procedure (see Technical Note 6015A, Electrical wiring repair,
Wiring: Precautions for repair), repair the wiring, otherwise replace the wiring.
Check that the diagnostic socket, component code 225, is correctly supplied by checking the following
connections:
For LOGAN, SANDERO and DUSTER:
–BP56 on component 225 (+ before ignition feed),
–AP10 on component 225 (+ after ignition feed).
For MEGANE II and SCENIC II:
–BP32 on component 225 (+ before ignition feed),
–AP43 on component 225 (+ after ignition feed).
For MASTER II:
–BCP3 on component 225 (+ before ignition feed),
–AP21 on component 225 (+ after ignition feed).

82A-37
AFTER REPAIRDeal with any faults displayed by the diagnostic tool.
Clear the faults from the computer memory using command RZ001 Fault memory.
V1 MR-372-J84-82A000$110.mif
ENGINE IMMOBILISER
Fault finding – Fault finding chart82A
SVT
Vdiag No.: 04
ALP1
CONTINUED 6
For THALIA 2/SYMBOL 2, CLIO II F and KANGOO VLL:
–BP10 on component 225 (+ before ignition feed),
–AP10 on component 225 (+ after ignition feed).
If the connection or connections are faulty and there is a repair method (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise replace the wiring.
If dialogue is still not established after these various checks, replace the anti-theft tracking unit, component code
2186.
If the fault is still present, contact Techline.