87B-33
AFTER REPAIRCheck the system operation.
V1 MR-376-X76-87B000$150.mif
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding – Fault Finding Chart87B
UCH
VDiag No.: 0F
ALP6 Heated rear screen not working
NOTESOnly consult this customer complaint after a complete check with the diagnostic
tool.
Special note:
Use Wiring Diagrams Technical Note for Kangoo VLL.
Check for the presence and condition of fuses F31 (10 A) and F14 (15 A) of the heated rear screen switch,
component code 128 and fuse F7 (30 A) of the heated rear screen relay, component code 235 on the passenger
compartment fuse and relay box, component code 260 (see MR 374, Mechanical, 81C, Fuses, Fuses: List and
location of components).
Check the continuity and insulation of the following connections:
●AP3 between components 128 and 260,
●LPG between components 128 and 260,
●BP15 between components 235 and 260.
If the connection or connections are faulty and there is a repair procedure (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise replace it.
Check the continuity and insulation of the following connections:
●15A between components 200 and 128,
●15LP between components 128 and 235,
●MG between earth and component200.
●MK between earth and components 128 and 235.
If the connection or connections are faulty and there is a repair procedure (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise replace it.
If the fault is still present, refer to MR 374, Mechanical, 84A, Controls – Signals, Heated rear screen: Repair,
otherwise contact the Techline.
UCH_V0F_ALP06
