88C-12V1 MR-376-X76-88C000$030.mif
88C
2nd generation
(AC4 phase II)
CONFIGURATION/CONFIGURATION READING
– The configuration reading commands are used to read the computer configuration status in relation to the trigger
lines installed in the vehicle.
PARAMETER SETTINGS:
LOCK COMPUTER
This command should be used for any operation on the system. It inhibits all of the trigger lines.
UNLOCK COMPUTER
This command is used to unlock the computer when it is new or if it has been deactivated via the UNLOCK
COMPUTER command.Configuration reading Option Configuration
DRIVER'S FRONTAL AIRBAG WITH
Computer configuration PASSENGER FRONTAL AIRBAG WITH
DRIVER'S PRETENSIONER NONE
PASSENGER PRETENSIONER NONE
IMPACT SIGNAL WITH
VEHICLE TYPE READING KANGOO
AIRBAGS AND PRETENSIONERS
Fault finding – Configuration and programming
