88C-21
AFTER REPAIRDeal with any faults displayed by the diagnostic tool.
Clear the computer memory.
Carry out a road test followed by another check with the diagnostic tool.
V1 MR-376-X76-88C000$060.mif
AIRBAGS AND PRETENSIONERS
Fault finding – Interpretation of faults88C
2nd generation
(AC4 phase II)
DF004
CONTINUED 1
NOIf the value obtained is not correct on cable B of the adapter, check the connections
on the 30-track connector (tracks 13 and 14).
If the value remains incorrect, switch off the ignition and remove any necessary
components
to access the wiring of the passenger airbag module (Kangoo: remove the
dashboard). Disconnect the passenger airbag ignition module, connect a dummy
ignition module to the ignition module connector then re-measure the resistance on
the cable marked B of the adapter.
If the value obtained is correct, replace the passenger's airbag module.
If the value obtained is not correct, replace the airbag wiring.
