2013 NISSAN ALTIMA COUPE Owners Manual

Page 377 of 414

NISSAN ALTIMA COUPE 2013 D32 / 4.G Owners Manual ●Tire tread of the TEMPORARY USE
ONLY spare tire will wear at a faster rate
than the standard tire. Replace the
spare tire as soon as the tread wear
indicators appear.
● Do not use the spare tire

Page 378 of 414

NISSAN ALTIMA COUPE 2013 D32 / 4.G Owners Manual 9 Technical and consumer information
Capacities and recommended fuel/lubricants.........9-2
Fuel recommendation ...........................9-3
Engine oil and oil filter recommendations ..........9-5
A

Page 379 of 414

NISSAN ALTIMA COUPE 2013 D32 / 4.G Owners Manual The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure
described in the “Maintenance and do-it-yourself” section to

Page 380 of 414

NISSAN ALTIMA COUPE 2013 D32 / 4.G Owners Manual FUEL RECOMMENDATION
Use unleaded regular gasoline with an octane
rating of at least 87 AKI (Anti-Knock Index) num-
ber (Research octane number 91) .
CAUTION
●Using a fuel other than that specified
c

Page 381 of 414

NISSAN ALTIMA COUPE 2013 D32 / 4.G Owners Manual ●If a methanol blend is used, it should
contain no more than 5% methanol
(methyl alcohol, wood alcohol) . It
should also contain a suitable amount
of appropriate cosolvents and corro-
sion inhibitor

Page 382 of 414

NISSAN ALTIMA COUPE 2013 D32 / 4.G Owners Manual ENGINE OIL AND OIL FILTER
RECOMMENDATIONS
Selecting the correct oil
It is essential to choose the correct grade, quality
and viscosity engine oil to ensure satisfactory
engine life and performance. Se

Page 383 of 414

NISSAN ALTIMA COUPE 2013 D32 / 4.G Owners Manual Your engine was filled with a high-quality engine
oil when it was built. You do not have to change
the oil before the first recommended change
interval. Oil and filter change intervals depend
upon how

Page 384 of 414

NISSAN ALTIMA COUPE 2013 D32 / 4.G Owners Manual ENGINE
ModelQR25DE
Type Gasoline, 4-cycle, DOHC
Cylinder arrangement 4-cylinder in-line
Bore x Stroke in (mm) 3.5 x 3.9 (89.0 x 100.0)
Displacement cu in (cm
3) 151.82 (2,488)
Firing order 1–3–4