2013 MITSUBISHI iMiEV start stop button

CAUTION
l
Do not clasp the top of regular charge con-
nector. It could cause injury to touch the
protrusion on the lid. NOTE
l If

the electric motor switch is turned to the
“START” position with the regular charge
connector connected to the regular charge
port, the electric motor unit cannot be started.
8. Make sure that the charging indicator on the instrument cluster is illuminated. If the charging indicator is not illuminated,
charging is not started.
Make

sure that the regular charge port, the
plug and the connector are appropriately con-
nected, and perform charging from Step 5
again.
NOTE l When the regular charge connector is connec-
ted to the charge port, the charging indicator
is blinking. When charging is started, the
charging indicator is illuminated.
l The charge level for traction battery can be
checked with the energy level gauge (I) on
the instrument cluster.
Refer to “Energy level gauge” on page 4-06. 9. Charging
is complete when the charging indi-
cator turns off. Pull out the regular charge con-
nector while pressing the button (J). NOTE
l Charging

can be stopped half way. In this
case, also, pull out the regular charge connec-
tor while pressing the button.
10. Close the inner lid and close the regular charg- ing lid. Charging
1-11 1
OHAE13E1

Symptom Possible cause Possible solution
Regular charging is dis-
continued. There is no power coming from the out-
let. There may have been a electrical power failure, or the breaker may have failed.Charging will
resume when the power source is reset.
The EV charging cable has been discon-
nected. Check that the EV charging cable has not been disconnected.
The button on the regular charge con-
nector has been pressed. If the charge connector button is pressed for a long period of time, charging will be stopped.
Start the charging procedure again.
The temperature of the traction battery
is too hot or too cold to charge. Confirm the traction battery temperature.
Refer to “Cautions and actions to deal with intense heat” on page
06 and “Cautions and ac-
tions to deal with intense cold” on page 08.
Charging is stopped by the regular
charge timer. Charging will stop depending on the timer function setting of the regular charge device. If
you need to charge the traction battery more, start the charging procedure again.
Quick charging cannot be
started. The charge connector is not connected
correctly and/or not locked. Check that the charge connector is connected correctly and that it is locked.
The self-diagnostic function of the
quick charge device returns a negative
result. There is a possibility that the vehicle has a malfunction. Stop charging and contact a
MITSUBISHI MOTORS

Authorized Service Point.
The power switch of the quick charger
is off. Check the power switch of the quick charger.
Quick charge is discontin-
ued. Charging is stopped by the quick
charge timer. Charging will stop depending on the timer function setting of the quick charge device.If you
need to charge the traction battery more, start the charging procedure again.
Charging stops at 80% capacity. Charging is designed to stop when the traction battery capacity reaches 80%. If you need to charge the traction battery more than
80%, start the charging procedure again.
The power supply for the quick charg-
er is off. Check whether the power supply for the quick charger is off. Charging
1-17 1
OHAE13E1

NOTE
l You
can check if the belt locks by pulling it
forward quickly.
To fasten 1. Pull the seat belt out slowly while holdingthe latch plate.
NOTE l When the seat belts cannot be pulled out in a
locked condition, pull the belts once forceful-
ly and then return them. After that, pull the
belts out slowly once again.
2. Insert the latch plate into the buckle until a “click” is heard. WARNING
l Never
wear the lap portion of the belt
across your abdomen. During accidents it
can press sharply against the abdomen
and increase the risk of injury. WARNING
l The
seat belts must not be twisted when
worn.
3. Pull
the belt slightly to adjust slackness as de- sired.
To unfasten
Hold the latch plate and push the button on the buck-
le. NOTE
l As

the belt retracts automatically, keep hold-
ing the latch plate while retracting so that the
belt stows slowly. Failure to do this could
damage the vehicle. Seat belt warning
E00413000025
Driver’s and front passenger’s seat belt reminder/
warning lamp E00414800020
The driver’s and front passenger’s seat belt warn-
ing lamp is located on the instrument panel. When the electric motor switch is turned to the
“ON”

position, if a driver or a front passenger has
not fastened the seat belt, the warning lamp will il-
luminate.
Having passed approximately 1 minute since the
electric motor switch is turned to the “ON” posi-
tion, if the seat belt remains unfastened when the ve-
hicle is driven, the warning lamp will flash and the
tone will sound intermittently for approximately 90
seconds.
If the seat belt subsequently remains unfastened,
the warning lamp and tone will issue further warn-
ings each time the vehicle starts moving from a
stop. And if the passenger unfastens the seat belt
while driving, the warning will operate in the same
way.
When the seat belt is fastened, the warnings will stop. Seat and seat belts
3-09 3
OHAE13E1

To play from an iPod
E00756300385
1. Press
the POWER button to turn on the au-
dio system. The system turns on in the last
mode used.
2. Connect your iPod to the USB input terminal. Refer to “How to connect an iPod” on page
6-34.
3. Press the CD button to switch to the iPod mode. The mode changes every time the CD
button is pressed.
CD mode → iPod mode → CD mode
The iPod indicator is illuminated and then
the iPod mode will be activated.
4. Once the device is selected, playback starts
and indicator appears on the display.
NOTE l Depending

on the condition of your iPod, it
may take a longer time before the playback
starts.
5. To stop the playback, change over to a differ- ent mode.
NOTE l Buttons on the iPod are disabled while the
iPod is connected to the audio system.
l To adjust the volume and tone, refer to “To
adjust the volume” and “To adjust the tone”.
To fast-forward/reverse the track E00756400126
Fast-forward
To
fast-forward the current track, press the
TRACK button. While the button is pressed,
the track will be fast-forwarded. Fast-reverse
To

fast-reverse the current track, press the TRACK button. While the button is pressed, the track
will be fast-reversed.
To select a desired track E00756500101
Track up
Press
the TRACK button repeatedly until the de-
sired track number appears on the display.
Track down
Press

the TRACK button repeatedly until the de-
sired track number appears on the display.
NOTE
l Pressing

the TRACK button once during
the

song will cause the audio system to re-
start playback from the beginning of the song.
To find a track from the iPod menu E00756600199
You can select desired tracks from the “Playlists”,
“Artists”,

“Albums” or “Songs” menus on your iPod.

Operate the following buttons or knob to select de-
sired tracks.
When this mode is activated by pressing the but-
ton,

the SEL indicator will be displayed in the dis-
play. button
: Press the button to start this
mode or cancel the selection.
SELECT knob : Turn the knob to show the menu or category or track. button
: Press the button to select the
menu or category or track. NOTE
l If

no operation is performed for 10 seconds
or more or other button is operated after the
SELECT knob has been pressed, searching
of the desired tracks is cancelled.
l If no operation is performed for 5 seconds or
more after the track is displayed, playback
starts.
l If the button is pressed when the category
is

delected, playback of the first tracks in the
selected category starts.
l When the SEL indicator is not shown on the
display and the SELECT knob is operated,
the volume adjustment is effective.
To select the playing mode E00769200014
1. Press
and hold the MENU button until you
hear a beep.
2. Press the MENU button repeatedly to select the playing mode you wish to change to. The
order is: REPEAT mode → SHUFFLE mode
→ mode off.
3. Press the SEEK / button repeatedly to
select the mode.
REPEAT mode SHUFFLE mode For pleasant driving
6-21 6
OHAE13E1

To play from a USB memory device
E00762500379
1. Press
the POWER button to turn on the au-
dio system. The system turns on in the last
mode used.
2. Connect your USB memory device to the USB input terminal.
Refer to “How to connect a USB memory de-
vice” on page 6-33.
3. Press the CD button to switch to the USB mode. The mode changes as follows every
time the CD button is pressed.
CD mode → USB mode → CD mode
The USB indicator is illuminated and then
the USB mode will be activated.
4. Once the device is selected, playback starts and the indicator appears on the display.
NOTE l Depending on the condition of your USB de-
vice, it may take a longer time before the play-
back starts.
5. To stop the playback, change over to a differ- ent mode.
NOTE l To adjust the volume and tone, refer to “To
adjust the volume” and “To adjust the tone”.
Supported compressed music files E00758300376
This audio can play MP3, WMA, AAC and WAV
files

recorded in a USB memory device. This audio
supports up to 65,535 files in 700 folders on 8 levels. Folder selection order/file playback order (exam-
ple)
The

folder and file hierarchy in the USB memory
device is shown below.
Root folder (Root directory)
Level 4
Level 3
Level 2
Level 1 Folder selection
In the order
File selection
In the order NOTE
l If a file protected by copyrights is played, the
file will be skipped.
To fast-forward/reverse the file E00758400104
Fast-forward
To fast-forward the current file, press the TRACK button. While the button is pressed, the file will
be fast-forwarded.
Fast-reverse
To

fast-reverse the current file, press the TRACK button. While the button is pressed, the file will
be fast-reversed.
To select a file E00758500105
File up
Press
the TRACK button repeatedly until the de-
sired file number appears on the display.
File down
Press

the TRACK button repeatedly until the de-
sired file number appears on the display.
NOTE
l Pressing

the TRACK button once during
the

song will cause the audio system to re-
start playback from the beginning of the song.
To find a file E00758600324
Operate the following buttons or the SELECT
knob to select the desired file.
When

this mode is activated by pressing the but-
ton,

the SEL indicator will be displayed in the dis-
play. For pleasant driving
6-23 6
OHAE13E1