USA (FCC) and Canada (IC)Register model name: UK002
Product code: MRBE309A
FCC CAUTION
Changes or modifications not expressly appro‐ ved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
This device complies with Part 15 of FCC Rules
and Industry Canada licence-exempt RSS stan‐
dard(s). Operation is subject to the following
two conditions: (1) this device may not cause
interference, and (2) this device must accept
any interference, including interference that
may cause undesired operation of this device.
Le présent appareil est conforme aux la partie
15 des règles de la FCC et CNR d'Industrie Ca‐
nada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radio‐
électrique subi, même si le brouillage est sus‐ ceptible d'en compromettre le fonctionnement.
This equipment complies with FCC/IC radiation
exposure limits set forth for an uncontrolled en‐
vironment and meets the FCC radio frequency
(RF) Exposure Guidelines in Supplement C to
OET65 and RSS-102 of the IC radio frequency
(RF) Exposure rules. This equipment has very
low levels of RF energy that it deemed to com‐
ply without maximum permissive exposure
evaluation (MPE). But it is desirable that it
should be installed and operated keeping the
radiator at least 20cm or more away from per‐
son’s body (excluding extremities: hands,
wrists, feet and ankles).
Cet équipement est conforme aux limites d’ex‐
position aux rayonnements énoncées pour un
environnement non contrôlé et respecte les rè‐
gles les radioélectriques (RF) de la FCC lignes di‐
rectrices d'exposition dans le Supplément C à
OET65 et d’exposition aux fréquences radio‐
électriques (RF) CNR-102 de l’IC. Cet équipe‐ment émet une énergie RF très faible qui est
considérée conforme sans évaluation de l’ex‐
position maximale autorisée. Cependant, cet
équipement doit être installé et utilisé en gar‐
dant une distance de 20 cm ou plus entre le
dispositif rayonnant et le corps (à l’exception
des extrémités : mains, poignets, pieds et che‐
villes).
Tire Pressure Monitoring
System
Canada
IC: 7812D-S180056
Operation is subject to the following two condi‐
tions:
(1) this device may not cause harmful interfe‐
rence, and
(2) this device must accept any interference re‐
ceived, including interference that may cause
undesired operation.
USA FCC ID: KR5S180052056
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interfe‐
rence, and
(2) this device must accept any interference re‐
ceived, including interference that may cause
undesired operation.
South Korea Continental S180052056
KCC-CRM-TAL-S180052056Seite 236RépertoireLicense Texts and Certifications236
Online Edition for Part no. 01 40 2 925 117 - X/13
EuropeDeclaration of Conformity in accordance with
Directive 1999/5/EC (R&TTE Directive)
Manufacturer: Continental Automotive GmbH
Product type designation: S180052056
Intended use: Tire pressure monitoring system
The product mentioned above complies with the essential requirements and other relevant
provisions of Directive 1999/5/EC, when used
for its intended purpose:
Health and safety pursuant to Art. 3(1)(a):
Applied standard(s):
EN 60950–1:2006 + A11:2009 + A1:2010 +
A12:2011
EN 62479:2010
Electromagnetic compatibility pursuant to Art.
3(1)(b):
Applied standard(s):
EN 301 489–1 V1.8.1 (2008–04)
EN 301 489–3 V1.4.1 (2002–08)
Efficient use of spectrum pursuant to Art. 3(2):
Applied standard(s):
EN 300 220–1 V2.3.1 (2010–02)
EN 300 220–2 V2.3.1 (2010–02)
The following marking applies to the above
mentioned product:
Seite 237License Texts and CertificationsRépertoire237
Online Edition for Part no. 01 40 2 925 117 - X/13
