2013 MERCEDES-BENZ SL-Class ECO mode

Selecting sports tuning
X
Make sure that the engine is running or that
it has been switched off by the ECO start/
stop function.
X If indicator lamp 0003 is not lit:
press
button 0002.
Indicator lamp 0003lights up. You have
selected the suspension for a sporty driving
style.
The AMG Suspension System SPORT message appears in the multifunction
display.
The firmer suspension tuning in Sport mode
ensures even better contact with the road.
Select this mode if you favor a firmer
suspension tuning.
Selecting comfort tuning X
Make sure that the engine is running or that
it has been switched off by the ECO start/
stop function.
X If indicator lamp 0003 is lit:
press
button 0002.
Indicator lamp 0003goes out. You have
selected the suspension for acomfortable
driving style.
The AMG Suspension System COMFORT message appears in the multifunction
display.
In Comfort mode, the driving characteristics
of your vehicle are more comfortable. Select
this mode if you favor amore comfortable
driving style.
Driving conditions menu in the
COMAND display You can display some driving systems and
additional information in the COMAND
display.
X
Call up the driving conditions menu in the
COMAND display (Y page 310).
The corresponding displays appear in the
COMAND display. Example: displays in the COMAND display
0002
Selection of raised level (Y page 200)
0003 Activity of ABC spring struts for roll and
pitching support
0027 Selected suspension tuning, i.e. sporty or
comfortable (Y page 201)
0026 G-FORCE (longitudinal and lateral
acceleration)
0024 Current vehicle level 202
Driving systemsDriving and parking

Useful information
i This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences are
possible. Please note that your vehicle may
not be equipped with all features
described. This also applies to safety-
related systems and functions.
i Read the information on qualified
specialist workshops: (Y page 38).Important safety notes
G
WARNING
If you operate information systems and
communication equipment integrated in the
vehicle while driving, you will be distracted
from traffic conditions. You could also lose
control of the vehicle. There is a risk of an
accident.
Only operate the equipment when the traffic
situatio npermits .Ifyou are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the
equipment when the vehicle is stationary. G
WARNING
If the instrument cluster has failed or
malfunctioned, you may not recognize
function restrictions in systems relevant to
safety. The operating safety of your vehicle
may be impaired. There is a risk of an
accident.
Drive on carefully. Have the vehicle checked
at a qualified specialist workshop
immediately.
You must observe the legal requirements for
the country in which you are currently driving
when operating the on-board computer.
The on-board computer only shows messages
or warnings from certain systems in the multifunction display
.You should therefore
make sure your vehicle is operating safely at
all times. Otherwise, a vehicle that is not
operating safely may cause an accident.
For an illustration of the instrument cluster,
see (Y page 43). Displays and operation
Instrument cluster lighting
The lighting in the instrument cluster, in the
displays and the controls in the vehicle
interior can be adjusted using the brightness
control knob.
The brightness control knob is on the bottom
left of the instrument cluster (Y page 43).
X Turn the brightness control knob counter-
clockwise or clockwise.
If the light switch is set to 0006,0012or
000A, the brightness is dependent upon
the brightness of the ambient light.
i The light sensor in the instrument cluster
automatically controls the brightness of
the multifunction display.
In daylight, the displays in the instrument
cluster are not lit. Coolant temperature display
G
WARNING
Driving when your engine is overheated can
cause some fluids which may have leaked into
the engine compartment to catch fire. You
could be seriously burned.
Steam from an overheated engine can cause
serious burns which can occur just by opening
the engine hood. Stay away from the engine
if you see or hear steam coming from it.
Stop the vehicle in a safe location away from
other traffic .Turn off the engine, get out of the
vehicle and do no tstand nea rthe vehicle until
the engine has cooled down. 222
Displays and operationOn-board computer and displays

X
Press the 0007or0006 button to set the
color to SOLAR ,
SOLAR Orange or
SOLAR Red .
X Press the 000For001F button to save the
setting.
Activating/deactivating surround
lighting and exterior lighting delayed
switch-off
X Press the 0004or0008 button on the
steering wheel to select the Settingsmenu.
X Press the 0007or0006 button to select the
Lights submenu.
X Press 000Fto confirm.
X Press the 0007or0006 button to select the
Surround Lighting function.
When the Surround Lighting function is
activated, the light cone and the area
around the vehicle are displayed in red in
the multifunction display.
X Press the 000Fbutton to save the setting.
Deactivating delayed switch-off of the
exterior lighting temporarily:
X Before leaving the vehicle, turn the
SmartKey to position 0in the ignition lock.
X Turn the SmartKey to position 2in the
ignition lock.
The exterior lighting delayed switch-off is
deactivated.
Delayed switch-off of the exterior lighting is
reactivated the next time you start the
engine.
If you have activated the SurroundLighting function and the light switch is set
to 0006, the following functions are activated
when it is dark:
R surround lighting: the exterior lighting
remains lit for 40 seconds after unlocking
with the key. If you start the engine, the
surround lighting is switched off and automatic headlamp mode is activated
(Y
page 126).
R exterior lighting delayed switch-off: the
exterior lighting remains lit for
60 seconds after the engine is switched off.
If you close all the doors and the trunkl id,
the exterior lighting goes off after
15 seconds.
i Depending on your vehicle's equipment,
when the surround lighting and delayed
switch-off exterior lighting are on, the
following light up:
R Parking lamps
R Low-beam headlamps
R Daytime running lamps
R Side marker lamps
R Surround lighting in the exterior mirrors
Activating/deactivating the interior
lighting delayed switch-off
If you activate the Interior Lighting Delay function, the interior lighting remains
on for 20seconds after you remove the
SmartKey from the ignition lock.
X Press the 0004or0008 button on the
steering wheel to selec tthe Settings menu.
X Press the 0007or0006 button to select the
Lights submenu.
X Press the 000Fbutton to confirm.
X Press 0007or0006 to select the
Interior Lighting Delay function.
When the Interior Lighting Delay function is activated, the vehicle interior is
displayed in red in the multifunction
display.
X Press the 000Fbutton to save the setting. 234
Menus and submenusOn-board computer and displays

When the engine oil temperature is below
80 †, the oil temperature is shown in blue.
Avoid driving at full engine output during this
time.
SETUP 0002
Drive program (C /S /S+ /M )
0003 ESP ®
mode (ON /OFF ) or SPORT handling
mode (SPORT )
0027 Suspension tuning (SPORT /COMFORT )
SETUP shows the drive program, the ESP ®
(Electronic Stability Program) mode and the
SPORT handling mode.
X Press the 0004or0008 button on the
steering wheel to select the AMG menu.
X Press the 0006button repeatedly until
SETUP is displayed.
or
X Briefly press the AMG button on the center
console (Y page 168).
RACETIMER Displaying and starting RACETIMER
The RACETIMER is only intended for use on a
closed race circuit. Do not use the function
on public roads. 0002
Lap
0003 RACETIMER You can start the RACETIMER when the
engine is running or if the SmartKey is in
position
2in the ignition lock.
X Press 0004or0008 on the steering wheel
to select the AMG menu.
X Press the 0006button repeatedly until the
RACETIMER is shown.
X To start: press the 000Fbutton to start the
RACETIMER.
Displaying the intermediate time X
Press the 0004or0008 button to select
Interm. Time .
X Press 000Fto confirm.
The intermediate time is displayed for five
seconds.
Starting a new lap 0002
RACETIMER
0003 Fastest lap time (best lap)
0027 Lap
X Press 000Fto confirm New Lap .
i It is possible to store a maximum of
sixteen laps. The 16th lap can only be
completed with Finish Lap .Menus and submenus
237On-board computer and displays Z

Display overview
Example display fo
rradio
0002 Status bar
0003 Calls up the audio menu
0027 Main function bar
0026 Display/selectio nwindow
0024 Radio menu bar
Status bar 0002shows the time and the current settings for telephone operation.
The main functions –navigation, audio, telephone and video –feature additional menus. This
is indicated by triangle 0003.The following table lists the available menu items.
Main function bar 0027allows you to call up the desired main function. When the main function
is activated, it is identifiable by the white lettering.
In the example, the audio main function is set to radio mode and display/selection
window 0026is active.
Radio menu bar 0024allows you to operate the radio functions. 286
At
ag lanceCOMAND

COMAND control panel
Function Page
0002
Switches to radio mode 426
Switches wavebands 428
Switches to satellite radio 432
0003
Switches to navigation
mode
316
Shows the menu system 316
0027
Press
0009repeatedly • Switches to audio CD,
audio DV
Dand MP3 mode
or DVD video mode 439
• Switches to memory card
mode
439
• Switches to MUSIC
REGISTER
451
• Switches to USB storage
device mode
439
• Switches to Media
Interface or audio AUX
mode
462
• Switches to Bluetooth
®
audio mode 458 Function Page
0026
Calls up the telephone
basi
cmenu: • Bluetooth
®
interface
telephony 383
0024
000B
Load/eject button 436
0025
Selects stations via the
station search function
428
Rewinds 443
Selects the previous track 442
0016
Disc slot
• Loads CDs/DVDs 436
• Ejects CDs/DVDs 438
• Updates the digital map 372
0017
Selects stations via the
station search function
428
Fast forward 443
Selects the next track 442
0018
Clear button
• Deletes characters 302
• Deletes an entry 302290
At
ag lanceCOMAND

The COMAND controller can be:
R
pressed briefly or pressed and held 0039
R turned clockwise or counter-clockwise
003E0012003F
R slid left or right 003600120037
R slid forwards or backwards 00380012000A
R slid diagonally 00340012003D
Example of operation
In the instructions, operating sequences are
described as follows:
X Press the 0006button.
Radio mode is activated.
X Select Radio by sliding
0012000Aand turning
003E0012003F the COMAND controller and press
0039 to confirm.
X Confirm Station List by pressing
0039.
The station list appears.
Buttons on the COMAND controller Overview
0002
Back button (Y page 292)
0003 CLR button (Y page 292)
0027 Seat function button (Y page 310)
0026 Favorites button (Y page 306)
i If your vehicle is not equipped with the
seat function button, it features two
favorites buttons. Back button
You can use the
000Cbutton to exit a menu
or to call up the basic display of the current
operating mode.
X To exit the menu: briefly press the000C
back button.
COMAND changes to the next higher menu
level in the curren toperating mode.
X COMAND changes to the basic display of
the curren toperating mode.
Clear button
X To delete individual characters: briefly
press the 0016clear button.
X To delete an entire entry: press and hold
the 0016 clear button.
Seat function button
You can use the 0011button to call up the
following seat functions:
R multicontour seat (with 4-way lumbar
support)
R active multicontour seat (dynamic seat and
massage function)
R balance (seat heating distribution)
More information on the seat functions
(Y page 310).
Favorites button
You can assign predefined functions to
the 0004 favorites button and call them up by
pressing the button (Y page 306).292
At
ag lanceCOMAND

X
Select Audio in the main function bar by
sliding 00380012the COMAND controller and
press 0039to confirm.
The Audio menu appears.
The 0021dot indicates the currently selected
audio mode.
X Select another audio mode, e.g. Radio , by
turning 003E0012003Fthe COMAND controller and
press 0039to confirm.
Radio mode is activated.
Selecting amenu item X
Select the station by turning 003E0012003Fthe
COMAND controller and press 0039to
confirm.
The statio nis set. Basic COMAND functions
Switching COMAND on/off X
Press the 0002control knob.
Aw arning message appears. COMAND
calls up the previously selected menu.
i If you switch off COMAND, playbac kof
the current audio or vide osource will also
be switched off. Switching the sound on or off Audio/video source sound
X
Press the 001Dbutton on the COMAND
controller or on the multifunction steering
wheel.
The sound from the respective audio or
video source is switched on or off.
i When the sound is off, the system
displays the 0025icon in the status line.
When you change the audio or video
source, or adjust the volume, sound
automatically switches on again.
i Even if the sound is switched off, you will
still hear navigation system
announcements.
Switching off navigation announcements
X Navigation announcements: press the
001D button during the announcement.
Switching navigation announcements
back on
X Press the 001Dbutton again.
The navigation announcementsa re active
again:
R if COMAND is switched off/on with the
0002 control knob.
R or after starting route guidance
Adjusting the volume Adjusting the volume for the audio or
video source
X
Turn the 0002control knob
or
X Press the 000Dor000E button on the
multifunction steering wheel.
The volume of the currently selected audio
or video source changes. 294
At
ag lanceCOMAND