
Selecting a menu/menu item and
confirming your selection
X
Press the =;9: buttons to
select  the menu/menu item and press the
9 button to confirm.
CD/DVD drive and AUX jacks The CD/DVD drive is located in the center
behind the front seats.
:
CD/DVD slot
; AUX, right-hand (R) jack for audio signal
= AUX, left-hand (L) jack for audio signal
? AUX, jack for video signal (V)
A CD/DVD eject button
The AUX jacks shown are for the AUX drive.
Identical 
 jacks can be found on the right-hand
side of the rear-compartment screens (AUX
display), ( Y page 139). At a glance
141
COMAND Z  

Cordless headphones
Overview
The 
cordless headphones for the rear compartment can be recognized by the "DIGITAL AUDIO"
inscription on the battery compartment cover and by the fact that there is no SPLITVIEW
symbol ( Y page 122)( Y page 122).:
Volume control
; To select a screen for the headphones
= Battery compartment cover
? To switch the cordless headphones on/off
A Indicator lamp with various displays ( Y page 143)
X Gently pull both sides of the headphones out and adjust the fit of the headphones by pulling
the headband in the direction of the arrow.
Switching the cordless headphones on/
off
X Press button ?.
Depending on the previous status, the
headphones 
are switched on or off. To save
the battery, the headphones are switched
off automatically if they do not receive a
signal within three minutes.
Adjusting the volume of the headphones
X Turn volume control : until you have
reached the desired volume. i
If you have connected corded
headphones to a rear-compartment
screen, you can adjust the volume by
pressing 
buttons C on the remote control
(Y page 125).
Selecting a screen for the headphones
X Move push slider  ; 
 to L (left-hand screen)
or R (right-hand screen). 142
At a glance
COMAND  

headphones as shown to prevent the
batteries from falling out.
X Remove the discharged batteries from the
tray.
X Insert the new batteries. Observe the
polarity markings on the batteries and
battery tray when doing so.
Left-hand battery: The positive pole (+)
must face upwards.
Right-hand battery The positive pole (+)
must face downwards.
X To close the battery compartment:
press battery compartment cover
downwards until it engages into place.
If the batteries have been inserted
correctly, the indicator lamp will light up
green when the headphones are switched
on. Basic functions
Using headphones i
Vehicles  intended for sale in the USA are
equipped with cordless headphones.
Corded headphones are available for the
Canadian and other markets.
You can use the cordless headphones
supplied and/or up to two sets of corded
headphones connected to the corresponding
jack of the rear-compartment screens
(Y page 139).
You will find information on the following
topics in the "Cordless headphones" section
(Y page 142).
R Switching the cordless headphones on/off
R Adjusting the volume of the headphones
R Selecting a screen for the headphones
Using the main loudspeakers This function is available in conjunction with
COMAND.
You can use the vehicle loudspeakers to
listen to a disc inserted in the rear-
compartment drive. To do so, at least one of the rear-compartment screens must be set to
disc mode.
X
To set operation via the main 
loudspeakers:  press the R function
button 
on the center console once or twice.
X Select  Audio by sliding  ZV the COMAND
controller and press W to confirm.
The Audio menu appears.
X Select  Rear by turning  cVd the COMAND
controller and press W to confirm.
i The 
 headphones' volume setting does not
affect the main loudspeakers.
Adjusting the sound settings You can select the sound settings in the audio
CD/DVD/MP3, video DVD and AUX modes.
X
Switch on an audio operating mode (e.g.
audio CD mode).
X Select  Treble or Bass using
the  :=; 
buttons on the remote
control and press the  9 button to confirm.
An adjustment scale appears.
X Select a setting using the  9:
buttons 
 and press the  9 button to confirm.
Multiple users Simultaneous use of the rear-
compartment disc drive
The two rear-compartment screens can be
operated almost entirely independently from
one 
another. However, there can be a conflict
in some menus if the two screens are used
simultaneously.
If the rear-compartment disc drive is being
used for both screens simultaneously,
selecting certain menus or settings on one of
the screens also affects the other screen.
The following functions affect both screens:
R changing playback options
R selecting a track (from a track list or folder)
R using the play, pause and stop functions
R fast forwarding/rewinding or scrolling248
Rear Seat Entertainment System
COMAND 

R
calling up the DVD menu and navigating
within it
R setting 
the language, subtitles and camera
angle
R calling up interactive DVD content
The following functions affect only one
screen:
R audio and video functions as well as picture
settings
R switching between full screen and the
menu
Switching between operating modes
When you exit an operating mode (e.g. audio
CD mode), the current setting is saved. If you
call up this operating mode again later, there
are two possibilities:
R the operating mode has been changed on
the other screen.
R the operating mode has not been changed.
In the first case, the operating mode appears
as it is on the other screen.
In the second case, the setting appears on the
screen as it was when you last exited the
operating mode.
Picture settings Overview
You can select these settings in video DVD
and AUX mode. Instructions for AUX mode
are detailed later 
(Y page 258).
Adjusting the brightness, contrast and
color
X Switch on video DVD mode ( Y page 241).
X To show the menu: press the 9 button
on the remote control.
or
X Select  Menu while the navigation menu
(Y page 241) is shown and press the  9
button to confirm.
X In both cases, select Video DVD using
the :=; buttons and press the
9 button to confirm. X
Select  Brightness, Contrast, Color or
Auto using the 9: buttons and
press 9 to confirm.
An adjustment scale appears.
X Select a setting using the  9:
buttons 
 and press the  9 button to confirm.
Changing the picture format
X To show the menu: press the 9 button
on the remote control.
or
X Select  Menu while the navigation menu
(Y page 241) is shown and press the  9
button to confirm.
X Select  Video DVD using
the :=; buttons and press the
9 button to confirm.
The ä symbol in front of the  Auto, 16:9 
Optimized,  4:3 
or Widescreen menu item
indicates the format currently set.
X Select a format using the 9:
buttons 
and press the  9 button to confirm. System settings
Note You can adjust almost all system settings
individually 
for each screen without affecting
the other screen. You make these settings
using the remote control.
Selecting the display language X
Select  System using the 9=;
buttons on the remote control and press
the 9 button to confirm.
You see the system menu on the selected
rear screen. Rear Seat Entertainment System
249
COMAND Z 

X
Select  Settings using the : button
and confirm with the  9 button.
X Select  Language using the 9:
buttons  and press the  9 button to confirm.
The list of languages appears. The  # dot
indicates the current setting.
X Select a language using the  9:
buttons 
 and press the  9 button to confirm.
The Rear Seat Entertainment System
activates the respective language.
Switching the display design X
Select  Settings using the : button
and confirm with the  9 button.
X Select  Day Mode, Night Mode or
Automatic using the 9: buttons
and press the 9 button to confirm.
The ä icon indicates the current setting. Design Explanation
Day Mode The display is set
permanently to day
design.
Night Mode The display is set
permanently to night
design.
Automatic The display design
changes depending on
the vehicle instrument
cluster illumination. Setting the brightness
X
Select  Settings using the : button
and confirm with the  9 button.
X Select  Brightness using the 9:
buttons 
 and press the  9 button to confirm.
A scale appears.
X Adjust the brightness using the  9:
buttons 
 and press the  9 button to confirm.
The brightness bar moves up or down. The
picture becomes lighter or darker in
accordance with the scale.
Showing/hiding the picture X
To hide the picture:  select Display OFF
in the system menu using the :;
buttons on the remote control and press
the 9 button to confirm.
The picture is hidden.
X To display the picture:  press the 9
button. Audio CD/DVD and MP3 mode
Safety note G
WARNING
The RSE CD/DVD player is a Class 1 laser
product. There is a danger of invisible laser
radiation 
when you open or damage the cover.
Do not remove the cover. The RSE CD/DVD
player does not contain any parts which can
be serviced by the user. For safety reasons,
have any necessary service work performed
by qualified personnel.
General notes You will find information on the following
topics in the Audio section:
R
notes on CDs/DVDs 
(Y page 229)
R notes on MP3 mode ( Y page 228)
R notes on copyright ( Y page 229)250
Rear Seat Entertainment System
COMAND  

Inserting a CD/DVD
The CD/DVD drive is located in the center
behind the front seats.
:
Disc slot
; Eject button
The CD/DVD drive is a single disc drive. If
there is already a disc inserted, this must be
ejected before another is inserted.
X Insert a disc into the disc slot.
The printed side of the disc must face
upwards. If neither side of the disc is
printed, 
the side you wish to play must face
downwards.
The CD/DVD drive draws in the disc. The CD/DVD drive plays the disc:
R
if it has been inserted correctly and is a
permissible disc, and
R after you have switched on disc mode
(audio CD/audio DVD/MP3 mode)
Data on an MP3 CD first needs to be loaded
by the drive. Loading may take some time,
depending on the number of folders and
tracks. Removing a CD/DVD X
Press the þ eject button.
The drive ejects the disc.
X Take the disc out of the slot.
If you do not take the disc out of the slot,
the 
drive will draw it in again automatically
after a short while.
Switching to audio CD, audio DVD or
MP3 mode X
Insert a CD/DVD ( Y page 251).
The 
 Rear Seat Entertainment System loads
the inserted disc.
X Select  Disc in the menu using the
9=; buttons on the remote
control 
and press the  9 button to confirm.
The corresponding mode is switched on.
The Rear Seat Entertainment System plays
the disc.
i Variable 
 bit rates in MP3 tracks can result
in the elapsed time shown being different
to the actual elapsed time.
Selects a track Selecting by skipping to a track
X
To skip forwards or backwards to a 
track:  press the = or ; button on
the remote control.
or
X Press the E or F button.
The 
 skip forward function skips to the next
track.
Skipping backwards restarts the current
track (if it has been playing for more than
eight seconds) or starts the previous track
(if the current track has only been playing
for a shorter time).
If you have selected the  Track List Mix
or Random Folder playback options, the
track order is random. Rear Seat Entertainment System
251
COMAND Z   

Selecting by track list
In audio CD mode, the track list contains all
tracks on the disc currently playing.
In 
audio DVD mode, the track list contains all
tracks in the currently active group; see
"Setting the audio format" ( Y page 227).
In MP3 mode, the track list shows all tracks
in the currently active folder as well as the
folder structure, allowing you to select any
track on the MP3 CD.
X Select  Track List  
 (audio CD/DVD mode)
or Folder (MP3 mode) using
the  :=; buttons on the remote
control and press the  9 button to confirm.
or
X Press the 9 button when the display/
selection window is selected.
The 
track list appears. The  # dot indicates
the current track.
X Select a track using the  9 or :
button 
 and press the  9 button to confirm.
Making a selection by entering the track
number directly
X Press the h button on the remote
control.
The track entry display appears.
Example: track 2
X Press the · number key.
Example: track 12
X Press the corresponding number buttons in
rapid succession.
i It is not possible to enter numbers that
exceed the number of tracks on the CD or
in the currently active folder.
X Wait for approximately three seconds after
making the entry.
You will hear the track which has been
entered. The corresponding basic menu
then reappears. Fast forward/rewind X
With the display/selection window active,
press the = or ; button on the
remote control repeatedly until you reach
the desired position.
or
X Press and hold the  E or F button
until the desired position is reached.
Selecting a folder This function is only available in MP3 mode.
X
Select  Folder in MP3 mode using
the  :=; 
buttons on the remote
control and press the  9 button to confirm.
or
X Press the 9 button when the display/
selection window is selected.
The folder content appears. :
Folder selection symbol
; Current folder name
= Track symbol
X To switch to the superordinate folder:
select 
icon : using the  9: buttons
on the remote control and press the  9
button to confirm.
The display shows the next folder up. 252
Rear Seat Entertainment System
COMAND  

:
Folder selection symbol
; Folder icon
X Select a folder using the 9 or :
button 
and press the  9 button to confirm.
You will see the tracks in the folder.
X Select a track using the  9 or :
button 
 and press the  9 button to confirm.
The track is played and the corresponding
folder is now the active folder.
Pause function This function is only available in audio DVD
mode.
X
To pause playback:  select Ë using
the  :=; 
buttons on the remote
control and press the  9 button to confirm.
The Ë display changes to  Ì.
X To continue playback: select Ì and
press the 9 button to confirm.
The Ì display changes to  Ë.
Stop function This function is only available in audio DVD
mode. X
To interrupt playback:  select É using
the  :=; 
buttons on the remote
control and press the  9 button to confirm.
The Ë display changes to  Ì.
X To continue playback: select Ì and
press the 9 button to confirm.
Playback 
continues from the point where it
was interrupted.
X To stop playback:  while playback is
interrupted, select É again and press
the 9 button to confirm.
Playback stops and returns to the
beginning of the DVD.  Ì is highlighted.
X To restart playback:  select Ì and
press the 9 button to confirm.
Playback starts from the beginning of the
DVD.
Setting the audio format Further information on audio formats is
available in the "Audio" section
(Y page 227).
X
Select  DVD-A using the :=;
buttons on the remote control and press
the 9 button to confirm.
X Select  Group using the 9: buttons
and press the 9 button to confirm.
The 
list of available audio formats appears.
The # dot indicates the format currently
selected.
X Select an audio format using the
9: 
buttons and press the  9 button
to confirm.
X To exit the menu:  press the =
or ; button.
Playback options Further information on playback options is
available in the "Audio" section
(Y page 228).Rear Seat Entertainment System
253
COMAND Z