2013 MERCEDES-BENZ S-Class audio

Setting the brightness
X
Select Settings using the
000Bbutton
and confirm with the 000Cbutton.
X Select Brightness using the
000A000B
buttons and press the 000Cbutton to confirm.
As cale appears.
X Adjust the brightness using the 000A000B
buttons and press the 000Cbutton to confirm.
The brightness ba rmoves up or down. The
picture becomes lighter or darker in
accordance with the scale.
Showing/hiding the picture X
To hide the picture: selectDisplay OFF in the system menu using the
000B000C
buttons on the remote control and press
the 000Cbutton to confirm.
The picture is hidden.
X To display the picture: press the000C
button. Audio CD/DVD and MP3 mode
Safety note G
WARNING
The RSE CD/DVD player is a Class 1laser
product .There is a danger of invisible laser
radiation when you open or damage the cover.
Do not remove the cover. The RSE CD/DVD
player does not contain any parts which can
be serviced by the user. For safety reasons,
have any necessary service work performed
by qualified personnel.
General notes You will find information on the following
topics in the Audio section:
R
notes on CDs/DVDs (Y page 234)
R notes on MP3 mode (Y page 233)
R notes on copyright (Y page 234) Inserting
aCD/DVD The CD/DVD drive is located in the center
behind the fron
tseats. 0002
Disc slot
0003 Eject button
The CD/DVD drive is a single disc drive. If
there is already a disc inserted, this must be
ejected before another is inserted.
X Inser tadisc into the disc slot.
The printed side of the disc must face
upwards. If neither side of the disc is
printed, the side you wish to play must face
downwards.
The CD/DVD drive draws in the disc. The CD/DVD drive plays the disc:
R
if it has been inserted correctly and is a
permissible disc, and
R after you have switched on disc mode
(audio CD/audio DVD/MP3 mode)
Data on an MP3 CD first needs to be loaded
by the drive. Loading may take some time,
depending on the number of folders and
tracks. Rear Seat Entertainment System
255COMAND Z

Removing
aCD/DVD X
Press the 0008eject button.
The drive ejects the disc.
X Take the dis cout of th eslot.
If you do not take the disc out of the slot,
the drive will draw it in again automatically
after a shor twhile.
Switching to audio CD, audio DVD or
MP3 mode X
Insert a CD/DVD (Y page 255).
The Rear Seat Entertainment System loads
the inserted disc.
X Select Disc in the menu using the
000A0009000C buttons on the remote
control and press the 000Cbutton to confirm.
The corresponding mode is switched on.
The Rear Seat Entertainment System plays
the disc.
i Variable bit rates in MP3 tracks can result
in the elapsed time shown being different
to the actual elapsed time.
Selects atrack Selecting by skipping to
atrack
X To skip forwards or backwards to a
track: press the 0009or000C button on
the remote control.
or
X Press the 0001or0002 button.
The skip forward functio nskips to the next
track.
Skipping backwards restarts the current
track (i fithas been playing for more than
eigh tseconds) or starts the previous track
(if the curren ttrack has only been playing
for a shorter time).
If you have selected the Track List Mixor
Random Folder playback options, the
track order is random. Selecting by track list
In audio CD mode, the track list contains all
tracks on the disc currently playing.
In audio DVD mode, the track list contains all
tracks in the currently active group; see
"Setting the audio format" (Y page 232).
In MP3 mode, the track list shows all tracks
in the currently active folde ras well as the
folder structure, allowing you to select any
track on the MP3 CD.
X Select Track List (audio CD/DVD mode)
or Folder (MP3 mode) using
the 000B0009000C buttons on the remote
control and press the 000Cbutton to confirm.
or
X Press the 000Cbutton when the display/
selection window is selected.
The track list appears. The 002Cdot indicates
the current track.
X Select a track using the 000Aor000B
button and press the 000Cbutton to confirm.
Making aselection by entering the track
number directly
X Press the 0033button on the remote
control.
The track entry display appears.
Example: track 2
X Press the 0013number key.
Example: track 12
X Press the corresponding number buttons in
rapid succession.
i It is not possible to enter numbers that
exceed the number of tracks on the CD or
in the currently active folder.
X Wait for approximately three seconds after
making the entry.
You will hear the track which has been
entered. The corresponding basic menu
then reappears. 256
Rear Seat Entertainment SystemCOMAND

Fast forward/rewind
X
With the display/selection window active,
press the 0009or000C button on the
remote control repeatedly until you reach
the desired position.
or
X Press and hold the 0001or0002 button
until the desired position is reached.
Selecting afolder This function is only available in MP3 mode.
X Select Folder in MP3 mode using
the 000B0009000C buttons on the remote
control and press the 000Cbutton to confirm.
or
X Press the 000Cbutton when the display/
selectio nwindow is selected.
The folder conten tappears. 0002
Folder selection symbol
0003 Current folder name
0026 Track symbol
X To switch to the superordinate folder:
select icon 0002using the 000A000B buttons
on the remote control and press the 000C
button to confirm.
The display shows the nex tfolder up. 0002
Folder selection symbol
0003 Folder icon
X Select a folder using the 000Aor000B
button and press the 000Cbutton to confirm.
You will see the tracks in the folder.
X Select a track using the 000Aor000B
button and press the 000Cbutton to confirm.
The track is played and the corresponding
folder is now the active folder.
Pause function This function is only available in audio DVD
mode.
X
To pause playback: select0007using
the 000B0009000C buttons on the remote
control and press the 000Cbutton to confirm.
The 0007 display changes to 000E.
X To continue playback: select000Eand
press the 000Cbutton to confirm.
The 000E display changes to 0007.
Stop function This function is only available in audio DVD
mode.Rear Seat Entertainment System
257COMAND Z

X
To interrupt playback: select0018using
the 000B0009000C buttons on the remote
control and press the 000Cbutton to confirm.
The 0007 display changes to 000E.
X To continue playback: select000Eand
press the 000Cbutton to confirm.
Playback continues from the point where it
was interrupted.
X To stop playback: while playback is
interrupted, select 0018againand press
the 000Cbutton to confirm.
Playback stops and returns to the
beginning of the DVD. 000Eis highlighted.
X To restart playback: select000Eand
press the 000Cbutton to confirm.
Playback starts from the beginning of the
DVD.
Setting the audio format Further information on audio formats is
available in the "Audio" section
(Y page 232).
X Select DVD-A using the
000B0009000C
buttons on the remote control and press
the 000Cbutton to confirm.
X Select Group using the
000A000B buttons
and press the 000Cbutton to confirm.
The list of available audio formats appears.
The 002Cdot indicates the format currently
selected.
X Select an audio format using the
000A000B buttons and press the 000Cbutton
to confirm.
X To exit the menu: press the0009
or 000C button.
Playbac koptions Further information on playback options is
available in the "Audio" section
(Y
page 232). X
Select CD ,
DVD-A or
MP3 using
the 000B0009000C buttons on the remote
control and press the 000Cbutton to confirm.
The options list appears .The 002C dot
indicates the option currently selected.
X Select Normal Track Sequence ,
Track List Mix or
Random Folder using the
000A000B buttons and press the 000Cbutton
to confirm.
The option is switched on. All options
except Normal Track Sequence will be
indicated in the display/selection window.
i If you change the disc, the Normal Track Sequence option is activated
automatically .Ifanoption is selected, it
remains selected after the Rear Seat
Entertainment System is switched on or
off.
Switching track information on/off
(MP3 mode only) If the function is switched on, folder and track
names are displayed.
If the function is switched off, disc and file
names are displayed.
X Select MP3 using the
000B0009000C
buttons on the remote control and press
the 000Cbutton to confirm.
X Select Show Track Information using
the 000A000B buttons and press the 000C
button to confirm.
The function is switched on 000Aor off 0002,
depending on the previous status. Video DVD mode
General notes Here you will find further information on the
following topics:
R
safety notes (Y page 225)
R notes on DVD s(Ypage 245) 258
Rear Seat Entertainment SystemCOMAND

DVD playback conditions
Playback problems may occur when playing
copied discs
.There is a large variety of discs,
DVD authoring software, writing software and
writers available. This variety means that
there is no guarantee that the Rear Seat
Entertainment System will be able to play
video DVDs that you have copied yourself.
You will find further information in the "Video"
chapter (Y page 245). Information regarding
COMAND also applies to the Rear Seat
Entertainment System.
Function restrictions Depending on the DVD, it is possible that
certain functions or actions described in this
section will be temporarily blocked or may not
function at all. As soon as you try to activate
these functions or actions, you will see the
0008 symbol in the display.
Inserting and removing aCD/DVD X
Proceed as described in the "Audio CD/
DV Da nd MP3 mode" section
(Y page 225).
Activating video DVD mode X
Insert a video DVD.
The Rear Sea tEntertainment System loads
the disc.
If disc mode was the last mode selected, it
will now be active.
If it was not, switch on video DVD mode as
described in the following instruction.
X Select Disc in the menu using the
000A0009000C buttons on the remote
control and press the 000Cbutton to confirm.
If the video DVD fulfills the playback
criteria, the fil meithe rstarts automatically
or the menu stored on the DVD appears. If
the DVD menu appears, you must start the
film manually.
X Select the corresponding menu ite minthe
DVD menu. Hiding/showing the navigation menu X
To show: press the000Aor000B button
on the remote control.
X To hide: press the 000Aor000B button.
or
X Wait for approximately eight seconds. Navigation menu
0002
Data medium type
0003 Current track
0026 Current scene
0025 Track time
0023 To show the menu
Showing/hiding the menu X
To show: press the000Cbutton on the
remote control.
or
X Select Menu while the navigation menu is
shown and press the 000Cbutton to confirm.
X To hide: press the 000Abutton and confirm
Full Screen by pressing the
000Cbutton. Rear Seat Entertainment System
259COMAND Z

X
Confirm Select by pressing the
000Cbutton.
The Rear Seat Entertainment System
executes the action or shows a submenu.
X If available, additional option scan now be
selected.
The Rear Seat Entertainment System then
switches back to the DVD menu.
i Depending on the DVD, it is possible that
the Back (to the movie) ,
Play ,
Stop ,
0007, 0008orGo up menu item may not
be operative or operative only at certain
points of the DVD. To indicate this, the
0008 icona ppears in the display.
Stopping a film or skipping to the
beginning or end of ascene
X Select any men uitem from the DVD menu.
The menu appears.
X To stop the film: select theStop menu
ite ma nd press the 000Cbutton on the remote
control to confirm.
X To skip to the end of a scene: select the
0008 menu ite mand press the 000Cbutton
to confirm.
X To ski pto the beginning of ascene:
selec tthe 0007 menu item and press the
000C button to confirm.
Moving up one level in the DVD menu
X Option 1: press the0001back button on
the remote control or select the
corresponding menu item in the DVD
menu. X
Option 2: select any menu item in the DVD
menu.
X Select the Go up menu item in the menu
and press the 000Cbutton to confirm.
Back to the film
X Option 1: press the0001back button on
the remote control repeatedly until you see
the film or select the corresponding menu
item in the DVD menu.
X Option 2: select any menu item in the DVD
menu and press the 000Cbutton to confirm.
X Select the Back (to the movie) menu
item in the menu and press the 000Cbutton
to confirm.
Setting the audio format This function is not available on all DVDs. If it
is available, you can set the audio language
or the audio format. The number of settings
is determined by the DVD content. It is
possible that the settings may also be
accessed from the DVD menu.
X
Press the 000Cbutton on the remote control
and show the menu.
X Select Video DVD and press the
000Cbutton
on the remote control to confirm.
X Select DVD Functions and press the
000C
button to confirm.
X Select Audio Language and press the
000C
button to confirm.
Am enu appears after a short while. The
002C dot in front of an entry indicates the
currently selected language.
X Select a language using the 000Aor000B
button and press the 000Cbutton to confirm.
X To exit the menu: press the0009
or 000C button.
Subtitles and camera angle These functions are not available on all DVDs.
The number of subtitle languages and camera
angles available depends on the contentof262
Rear Seat Entertainment SystemCOMAND

the DVD. It is possible tha
tthe settings may
also be accessed from the DVD menu.
X Press the 000Cbutton on the remote control
and show the menu.
X Select Video DVD and press the
000Cbutton
on the remote control to confirm.
X Select DVD Functions and press the
000C
button to confirm.
X Select Subtitles or
Camera Angle and
press the 000Cbutton to confirm.
In both cases, a menu appears after a few
seconds. The 002Cdot in front of an entry
indicates the current setting.
X Select the setting using the 000Aor000B
button and press the 000Cbutton to confirm.
X To exit the menu: press the0009
or 000C button.
Interactive content DVDs can also contain interactive content
(e.g. a video game). In a video game, you may
be able to influence events by selecting and
triggering actions. The type and number of
actions depend on the DVD.
X Select an action using the
000A000C000B0009 buttons on the
remote control and press the 000Cbutton to
execute it.
A menu appears and the first entry,
Select , is highlighted.
X Press the 000Cbutton. AUX mode
Introduction You can connect one external video source to
each of the displays of the Rear Seat
Entertainment System (AUX display) and also
one external video source to the rear-seat
CD/DVD drive (AUX drive) with a sound and
video signal. Please see the corresponding operating
instructions for information on how to
operate the external video source.
For further details about external video
sources, please consult an authorized
Mercedes-Ben
zCenter.
Connecting AUX equipment AUX drive
The AUX drive jacks are located on the CD/
DVD drive on the right next to the CD/DVD
eject button (Y
page 263).
Displaying AUX
The AUX display jacks are on the side of the
screen (Y page 144).
Audio and video connection
X Inser tthe audio plugs for the left and right
signals into the corresponding Land R
jacks.
X Insert the video plug into the Vjack.
Activating AUX mode AUX drive
X
Select AUX in the menu using the
000A0009000C buttons on the remote
control and press the 000Cbutton to confirm.
The AUX menu appears.
X Select Source from the AUX menu and
press the 000Cbutton to confirm.
X Select Disk Drive Aux and press the
000C
button to confirm.
You will hear and see the content of the
external video source if it is connected to
the CD/DVD drive and switched to
playback. If no video image is available
from the AUX source connected, you will
see an audio menu. Rear Seat Entertainment System
263COMAND Z

Displaying AUX
X Select the screen to which the external
video source is connected using the remote
control (Y page 129).
X Select AUX in the menu using the
000A0009000C buttons on the remote
control and press the 000Cbutton to confirm.
X Select Source from the AUX menu and
press the 000Cbutton to confirm.
X Select Display Aux and press the
000C
button to confirm.
You will see and hear the conten tofthe
video source if it is switched to playback. If
no video image is available from the AUX
source connected, you will see an audio
menu.
Selecting the active COMAND source
X Select AUX in the menu using the
000A0009000C buttons on the remote
control and press the 000Cbutton to confirm.
X Select Source from the AUX menu and
press the 000Cbutton to confirm.
X Select COMAND and press the
000Cbutton to
confirm.
The audio or video mode selected in
COMAND is transmitted to the Rear Seat
Entertainment System.
Operation with an active COMAND
source You can transfer an audioorv
ideo mode
selected in COMAND to the Rear Seat
Entertainment System.
i If you subsequently switch modes in
COMAND, the new source will not be
transmitted to the Rear Seat Entertainment
System.
X To switch on the function in COMAND:
switch on the desired audio mode in
COMAND or show the menu in video DVD
mode.
X Select the menu item at the bottom left,
e.g. CD in audio CD mode, by sliding
001C0006and turning
0031001C0032the COMAND controller
and press 0021to confirm.
X Select Active Source for Rear and
press 0021to confirm.
In the status bar at the top, you will see the
headphones icon and the _icon for the
source that has been switched on.
X To switch off the function in COMAND:
switch on the desired audio mode in
COMAND or show the menu in video DVD
mode.
X Select the menu item at the bottom left,
e.g. CD in audio CD mode, by sliding
001C0006
and turning 0031001C0032the COMAND controller
and press 0021to confirm.
X Select Rear OFF _
and press 0021the
COMAND controller to confirm.
Adjusting the brightness ,contrast or
color X
Select Source in the rear-compartment
screen and press the 000Cbutton on the
remote control to confirm.
X Select Display Aux or
Disk Drive Aux and press the
000Cbutton to confirm.
X Select Brightness ,
Contrast or
Color and press the
000Cbutton to confirm.
An adjustment scale appears.
X Select a setting using the 000Aor000B
button and press the 000Cbutton to confirm.
Changing the picture format X
Select Source in the AUX menu and press
the 000Cbutton on the remote control to
confirm.
X Select Display Aux or
Disk Drive Aux and press the
000Cbutton to confirm.
X Select Auto16:9 optimized ,
4:3 or
Widescreen using the
000A000B buttons
and press the 000Cbutton to confirm.
The äicon in front of a menu item
indicates the current setting. 264
Rear Seat Entertainment SystemCOMAND