2013 MAZDA MODEL MAZDASPEED 3 Owners Manual (in English)

Page 409 of 611

MAZDA MODEL MAZDASPEED 3 2013  Owners Manual (in English) Shuffle playback (only AVRCP Ver. 1.4)
Folder shuffle
Touch the
on-screen button during
playback to play the songs in the folder
shuffle.“
”is displayed during
playback.
Touch the
on-screen button

Page 410 of 611

MAZDA MODEL MAZDASPEED 3 2013  Owners Manual (in English) NOTElThe skip function may not be available
depending on the device.
lThe number of skips is limited by
Pandora®.
Selection from station list
Selection can be made from a
programmed radio station lis

Page 411 of 611

MAZDA MODEL MAZDASPEED 3 2013  Owners Manual (in English) Troubleshooting
Bluetooth®does not operate under the following conditions. Check whether the following
conditions apply to your Bluetooth®device:lThe device is not being operated correctly.lThe devi

Page 412 of 611

MAZDA MODEL MAZDASPEED 3 2013  Owners Manual (in English) Device pairing, connection problems
Symptom Cause Solution method
Unable to perform pairing
―First make sure the device is
compatible with the Bluetooth
®unit,
and then check whether the
Bluetooth

Page 413 of 611

MAZDA MODEL MAZDASPEED 3 2013  Owners Manual (in English) Voice recognition related problems
Symptom Cause Solution method
Poor voice recognition
lExcessive, slow speech.lExcessive, forceful speech
(shouting).
lSpeaking before the beep sound
has ended.
lLoud

Page 414 of 611

MAZDA MODEL MAZDASPEED 3 2013  Owners Manual (in English) Other problems
Symptom Cause Solution method
The indication for the remaining
battery is different between the
vehicle and the deviceThe indication method is different
between the vehicle and the devi

Page 415 of 611

MAZDA MODEL MAZDASPEED 3 2013  Owners Manual (in English) Safety Certification
FCC
FCC: CB2MAZGEN6HFT
NOTE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interfe

Page 416 of 611

MAZDA MODEL MAZDASPEED 3 2013  Owners Manual (in English) The term“IC:”before the radio certification number only signifies that Industry Canada
technical specifications were met. The antenna used for this transmitter must not be co-
located or operating