2013 LINCOLN MKT Owners Manual

Page 297 of 494

LINCOLN MKT 2013  Owners Manual The air conditioning may also cycle on and off during severe operating
conditions to protect overheating of the engine. When the engine coolant
temperature decreases to a more normal operating tempera

Page 298 of 494

LINCOLN MKT 2013  Owners Manual How fail-safe cooling works
If the engine begins to overheat, the engine coolant temperature gauge
will move to the red (hot) area and:
The coolant temperature warning light will illuminate.
The servi

Page 299 of 494

LINCOLN MKT 2013  Owners Manual WARNING:Never remove the coolant reservoir cap while the
engine is running or hot.
You have limited engine power when in the fail-safe mode, so drive the
vehicle with caution. The vehicle will not be

Page 300 of 494

LINCOLN MKT 2013  Owners Manual 6F50/6F55 Transmission
WARNING:The dipstick cap and surrounding components may
be hot; gloves are recommended.
WARNING:Use gloves when moving the air filter assembly;
components will be hot.
Note:Auto

Page 301 of 494

LINCOLN MKT 2013  Owners Manual Moving the Air Filter Assembly (EcoBoost™ engine)
WARNING:Do not run engine with the air filter disconnected.
1. Shut the engine off.
2. Clean the area around the clamp
that connects the air filter

Page 302 of 494

LINCOLN MKT 2013  Owners Manual 7. Without disconnecting the sensor (4), pull the air filter assembly up to
disconnect the air filter assembly from the seated grommets located
underneath the air filter assembly.
8. Rotate the air fi

Page 303 of 494

LINCOLN MKT 2013  Owners Manual High fluid level
If the fluid level is above the MAX
range of the dipstick, remove fluid to
reach the hashmark level.Note:
Fluid level above the MAX level may
cause shift and/or engagement concerns an

Page 304 of 494

LINCOLN MKT 2013  Owners Manual 4. Seat the air filter assembly back into the grommets by pushing down
on the air filter assembly.
5. Tighten the clamp.
6. Install and tighten two bolts that attach air filter assembly to the front
o