2013 Lexus IS300h phone

88
IS300h/250_Navi_EE1. QUICK REFERENCE ...................... 90
MAP SCREEN ......................................... 90
NAVIGATION MENU SCREEN ............ 92
2. MAP SCREEN OPERATION .......... 94
CURRENT POSITION DISPLAY ........... 94
MAP SCALE ............................................ 95
ORIENTATION OF THE MAP ............... 96
SWITCHING MAP
CONFIGURATIONS ............................. 97
SCREEN SCROLL OPERATION ........... 99
ADJUSTING LOCATION IN SMALL
INCREMENTS .................................... 101
3. MAP SCREEN INFORMATION... 102
DISPLAYING POI* ICONS .................. 102
ROUTE TRACE ..................................... 104
DISPLAYING INFORMATION
ABOUT THE ICON WHERE
THE CURSOR IS SET ........................ 105
STANDARD MAP ICONS .................... 106
4. TRAFFIC AND PARKING
INFORMATION .......................... 107
DISPLAYING TRAFFIC AND TRAFFIC
PREDICTION INFORMATION ......... 107
PARKING INFORMATION .................. 111
1. DESTINATION SEARCH
SCREEN ...................................... 114
2. SEARCH OPERATION................. 116
SELECTING THE SEARCH AREA ..... 117
SETTING HOME AS DESTINATION . 117
SETTING QUICK ACCESS AS
DESTINATION ................................... 118
SEARCHING BY ADDRESS ............... 118
SEARCHING BY POI* ......................... 121
SEARCHING BY MAP ......................... 122
SEARCHING BY MEMORY POINTS. 122
SEARCHING FROM PREVIOUS
DESTINATIONS................................. 123
SEARCHING BY INTERSECTION ..... 124
SEARCHING BY MOTORWAY
ENTRANCE/EXIT .............................. 125
SEARCHING BY COORDINATES ..... 126
SEARCHING BY TELEPHONE
NUMBER ............................................ 126
SEARCHING BY POI* NEAR
CURSOR ............................................. 127
SEARCHING BY UK/NL POSTAL
CODE................................................... 128
3. STARTING ROUTE GUIDANCE 129
STARTING ROUTE GUIDANCE ........ 129
SUSPENDING GUIDANCE ................. 133
1BASIC OPERATION2DESTINATION SEARCH

90
IS300h/250_Navi_EE
1. BASIC OPERATION
1. QUICK REFERENCE
MAP SCREEN
To display this screen, press the “MENU” button on the Remote Touch, then
select “Nav”, and select if the navigation menu screen is displayed.
No.NameFunctionPage
2D north up, 2D
heading up or
3D heading up
symbolIndicates whether the map orientation is set to
north-up or heading-up. In 3D map, only a
heading-up view is available.
96
“GPS” mark
(Global Posi-
tioning System)Shows that the vehicle is receiving signals
from the GPS182
Status bar
Displays the condition of Wi-Fi® and Blue-
tooth® connections, the level of reception and
the amount of battery charge left for a cellular
phone.16

106
1. BASIC OPERATION
IS300h/250_Navi_EE
No.Function
Select to set as a destination.
(P.129) If a destination has al-
ready been set, “Add to ” and
“Replace ” will be displayed.
“Add to ”: Select to add a des-
tination.
“Replace ”: Select to delete the
existing destination(s) and set a
new one.
Select to register as a memory
point.
Select to call the registered tele-
phone number.
Select to edit a memory point.
(P.154)
Select to delete a memory point.
Select to display a QR code. Des-
tination information can be ac-
quired by scanning the QR code
with a cellular phone.
Select to delete a destination.
Select to display detailed infor-
mation.
INFORMATION
Even when traffic/parking informa-
tion is not currently being received,
traffic information and “Info” will be
displayed for a while after traffic
information has been received.
STANDARD MAP ICONS
IconInformation
Town with > 1 million
people
Town with 500,000-1
million people
Town with 200,000-
500,000 people
Town with 100,000-
200,000 people
Town with 20,000-
100,000 people
Town with 10,000-20,000
people
Town with < 10,000 peo-
ple
Park/Monument
Golf Course
Airport
Hospital/Polyclinic
Shopping centre
University/College

107
1. BASIC OPERATION
IS300h/250_Navi_EE
3
NAVIGATION SYSTEM
4. TRAFFIC AND PARKING INFORMATION
*: Can only be used when receiving RDS-
TMC or TPEG (Transport Protocol Ex-
perts Group) information. Depending on
the country or area, receiving RDS-TMC
and TPEG information may not be possi-
ble.
1Press the “MENU” button on the
Remote Touch.
2Select “Info”.
Traffic information, traffic predic-
tion information and parking lot in-
formation can be viewed.
The following 3 methods are avail-
able to receive the above information:
• RDS-TMC* (Radio Data System-
Traffic Message Channel) using FM
signals
• TPEG*-TEC (Traffic Event Com-
pact), TPEG*-TFP (Traffic Flow
Prediction) and TPEG*-PKI (Live
Parking Information) using DAB
• TPEG*-TEC, TPEG*-TEP and
TPEG*-PKI via the internet by
using Wi-Fi
® or a cellular phone
For detailed information about con-
nection methods for a Wi-Fi® device
or cellular phone: P.48, 67
Receiving information using a cellu-
lar phone
• In order to use this service, a
Bluetooth
® DUN/PAN compatible
cellular phone with sufficient net-
work coverage and a SIM card with
a contract that allows access to the
internet are required.
• When using this service, depending
on your telephone subscription,
some related fees might apply.
• When a cellular phone is used in a
roaming situation (when outside the
geographical coverage area of
mobile network provider) connec-
tion fees will be more expensive.
DISPLAYING TRAFFIC AND
TRAFFIC PREDICTION
INFORMATION

115
2. DESTINATION SEARCH
3
NAVIGATION SYSTEM
IS300h/250_Navi_EE
Select to search for a destination by the last displayed map.122
Select to search for a destination by memory points.122
Select to search for a destination from previously set destinations.123
Select to search for a destination by intersection.124
Select to search for a destination by motorway entrance/exit.125
Select to search for a destination by UK/NL postal code.128
Select to search for a destination by coordinates.126
Select to search for a destination by telephone number.126
Select to search for a destination by point of interest near cursor.127
Select to set a destination by home.117
Select to set a destination by quick access.118
No.FunctionPage

126
2. DESTINATION SEARCH
IS300h/250_Navi_EE
1Display the “Destination” screen.
(P.116)
2Select “Coordinates”.
3Enter the latitude and longitude, and
select “OK”.
, , : Used to enter co-
ordinates in DMS format.
: Used to enter coordinates in
DEG format.
1Display the “Destination” screen.
(P.116)
2Select “Telephone no.”.
3Enter a telephone number and select
“OK”.
: Select to change the search ar-
ea. (P.117)
If there is more than 1 site with the
same number, the list screen will be
displayed and select desired item.
SEARCHING BY
COORDINATES
Searching by latitude and longitude
coordinates is available using both
DMS format (for example:
1234’56”) and DEG format (for ex-
ample: 12.345678).
SEARCHING BY
TELEPHONE NUMBER
INFORMATION
To set a memory point as a destina-
tion using the telephone number, the
number must already be registered
with the memory point. (P.153)

130
2. DESTINATION SEARCH
IS300h/250_Navi_EE
ROAD PREFERENCES
1Select “Road preference”.
2Select the desired road preferences
and select “OK”.
The system will avoid using routes that
include items whose indicators are off.
DESTINATION MAP
SCREEN
No.FunctionPage
Select to scroll the map
to the desired point.101
Select to display POIs
around the destination.102
Select to view the name,
address and telephone
number of the selected
point.

Select to change the road
preference.130
Select to determine the
map location of destina-
tion. If a destination has
already been set, “Add to
” and “Replace ”
will be displayed.
“Add to ”: Select to
add a destination.
“Replace ”: Select to
delete the existing desti-
nation(s) and set a new
one.

If the searched point has
been precisely identified
based on a detailed ad-
dress, appears on the
point.

INFORMATION
Even if the motorway indicator is
dimmed, the route cannot avoid
including a motorway in some cases.
If the calculated route includes a trip
by ferry, the route guidance shows a
sea route. After traveling by ferry, the
current position may be incorrect.
Upon reception of GPS signals, it is
automatically corrected.

150
4. MY MEMORY
IS300h/250_Navi_EE
1Select “Register”.
2Select the desired item to search for
the location. (P.114)
3Select “OK” when the editing home
screen appears. (P.150)
1Select “Edit”.
2Select the desired item to be edited.
3Select “OK”.
REGISTERING HOMEEDITING HOME
No.FunctionPage
Select to change the icon
to be displayed on the
map screen.
155
Select to edit the home
name.156
Select to display the
home name on the map
screen.
When set to on, the indi-
cator will illuminate.

Select to edit location in-
formation.156
Select to edit the tele-
phone number.156