2013 Lexus CT200h window

4887-2. Maintenance
CT200h_OM_OM76102E_(EE)
Where to go for maintenance service?
In order to maintain your vehicle in the best possible condition, Lexus recom-
mends that maintenance service operations as well as other inspections and
repairs be carried out by authorized Lexus dealers or repairers or other duly qual-
ified and equipped professionals. For repairs and services covered by your war-
ranty, please visit an authorized Lexus dealer or repairer, who will use genuine
Lexus parts in repairing any difficulties you may encounter. There can also be
advantages in utilizing authorized Lexus dealers or repairers for non-warranty
repairs and services, as members of the Lexus network will be able to expertly
assist you with any difficulties you may encounter.
Your Lexus dealer or repairer, or another duly qualified and equipped profes-
sional will perform all of the scheduled maintenance on your vehicle reliably and
economically due to their experience with Lexus vehicles.
Does your vehicle need repairs?
Be on the alert for changes in performance and sounds, and visual tip-offs that
indicate service is needed. Some important clues are:
Engine missing, stumbling or pinging
Appreciable loss of power
Strange engine noises
A fluid leak under the vehicle (However, water dripping from the air condition-
ing system after use is normal.)
Change in exhaust sound (This may indicate a dangerous carbon monoxide
leak. Drive with the windows open and have the exhaust system checked imme-
diately.)
Flat-looking tires, excessive tire squeal when cornering, uneven tire wear
Vehicle pulls to one side when driven straight on a level road
Strange noises related to suspension movement
Loss of brake effectiveness, spongy feeling brake pedal, pedal almost touches
the floor, vehicle pulls to one side when braking
Engine coolant temperature continually higher than normal (P. 570, 583)
If you notice any of these clues, take your vehicle to any authorized Lexus dealer
or repairer, or another duly qualified and equipped professional as soon as possi-
ble. Your vehicle may need adjustment or repair.

5147-3. Do-it-yourself maintenance
CT200h_OM_OM76102E_(EE)
Situations in which the tire pressure warning system may not operate properly
In the following cases, the tire pressure warning system may not operate prop-
erly.
• If non-genuine Lexus wheels are used.
• A tire has been replaced with a tire that is not an OE (Original Equipment)
tire.
• A tire has been replaced with a tire that is not of the specified size.
• Tire chains etc. are equipped.
• Lock nuts are equipped.
• An auxiliary-supported run-flat tire is equipped.
• If a window tint that affects the radio wave signals is installed.
• If there is a lot of snow or ice on the vehicle, particularly around the wheels
or wheel housings.
• If the tire inflation pressure is extremely higher than the specified level.
• If wheel without the tire pressure warning valve and transmitter is used.
• If the ID code on the tire pressure warning valves and transmitters is not reg-
istered in the tire pressure warning computer.
Performance may be affected in the following situations.
• Near a TV tower, electric power plant, gas station, radio station, large dis-
play, airport or other facility that generates strong radio waves or electrical
noise
• When carrying a portable radio, cellular phone, cordless phone or other
wireless communication device
When the vehicle is parked, the time taken for the warning to start or go off
could be extended.
When tire inflation pressure declines rapidly for example when a tire has burst,
the warning may not function.

5577-3. Do-it-yourself maintenance
CT200h_OM_OM76102E_(EE)
7
Maintenance and care
WA R N I N G
Replacing light bulbs
Be sure to stop the hybrid system and turn off the lights. Do not attempt to
replace the bulb immediately after turning off the lights.
The bulbs become very hot and may cause burns.
Do not touch the glass portion of the light bulb with bare hands. When it is
unavoidable to hold the glass portion, use and hold with a clean dry cloth to
avoid getting moisture and oils on the bulb.
Also, if the bulb is scratched or dropped, it may blow out or crack.
Fully install light bulbs and any parts used to secure them. Failure to do so
may result in heat damage, fire, or water entering the headlight unit. This may
damage the headlights or cause condensation to build up on the lens.
Do not attempt to repair or disassemble light bulbs, connectors, electric cir-
cuits or component parts.
Doing so may result in death or serious injury due to electric shock.
To prevent damage or fire
Make sure bulbs are fully seated and locked.
Check the wattage of the bulb before installing to prevent heat damage.
NOTICE
When replacing the outer foot lights
If the front window is stopping you from conducting the replace operation
properly, open the window on the side you are working on to allow you enough
space to work. Continuing the operation without giving yourself enough space
to work could lead you to scratch the vehicle.

6228-2. Steps to take in an emergency
CT200h_OM_OM76102E_(EE)
If the electronic key does not operate properly
Use the mechanical key (P. 127)
in order to perform the following
operations:
Locks all the doors
Closes the windows
* (turn and
hold)
Unlocks all the doors
Opens the windows
* (turn and
hold)
*: These settings must be customized at any authorized Lexus dealer or repairer,
or another duly qualified and equipped professional.
If communication between the electronic key and vehicle is interrupted (P.
145) or the electronic key cannot be used because the battery is depleted, the
smart entry & start system and wireless remote control cannot be used. In
such cases, the doors can be opened and the hybrid system can be started by
following the procedure below.
Locking and unlocking the doors and key linked functions
1
2
3
4

6589-2. Customization
CT200h_OM_OM76102E_(EE)
Automatic air conditioning system (P. 442, 452)
Power windows (P. 178)
*: This function cannot be customized unless power window operation using the
wireless remote control is enabled
FunctionDefault
settingCustomized
setting
Switching between outside
air and recirculated air
mode linked to “AUTO”
switch operation
OnOffO––O
A/C Auto switch operationOnOffO–OO
Heating/cooling operation
minimized in Eco drive
modeOnOff–––O
1234
FunctionDefault
settingCustomized
setting
Mechanical key linked
operation (close)OffOn–––O
Mechanical key linked
operation (open)OffOn–––O
Wireless remote control
linked operation (close)OffOn–––O
Wireless remote control
linked operation (open)OffOn–––O
Buzzer sounds if operated
using wireless remote con-
trol
*
OnOff–––O
1234

665What to do if... (Troubleshooting)
CT200h_OM_OM76102E_(EE)
Is the child-protector lock set?
The rear door cannot be opened from inside the vehicle when the lock
is set. Open the rear door from outside and then unlock the child-pro-
tector lock. (P. 1 3 6 )
Did you press the power switch while firmly depressing the brake
pedal?
(P. 196)
Is the shift position in P? (P. 196)
Is the electronic key anywhere detectable inside the vehicle? (P. 143)
Is the electronic key battery weak or depleted?
In this case, the hybrid system can be started in a temporary way. (P.
623)
Is the 12-volt battery discharged? (P. 624)
Is the window lock switch pressed?
The power window except for the one at the driver’s seat cannot be
operated if the window lock switch is pressed. (P. 178)
The auto power off function will be operated if the vehicle is left in
ACCESSORY or ON mode (the hybrid system is not operating) for a
period of time. (P. 198) The rear door cannot be opened
If you think something is wrong
The hybrid system does not start
The windows do not open or close by operating the power window
switches
The power switch is turned off automatically
(vehicles with a smart entry & start system)

671Alphabetical index
CT200h_OM_OM76102E_(EE)
Moon roof precautions .........183
Power window lock switch...178
Power window precautions...180
Rear door child-protectors ....136
Removed key battery
precautions .........................533
Seat belt precautions ...............44
Seat heater precautions .........459
Child-protectors.........................136
Cleaning ............................480, 484
Aluminum wheels.................481
Exterior .................................480
Interior ..................................484
Seat belts...............................485
Clock .........................................474
Condenser ..................................502
Console box ...............................465
Coolant
Capacity ................................642
Checking ...............................501
Preparing and checking
before winter ......................284
Cooling system ..........................501
Hybrid system overheating ...629
Consumption screen ..................117
Cruise control
Cruise control .......................228
Dynamic radar cruise
control ................................231
Cup holders ...............................466
Curtain shield airbags ..................45
Customizable features ...............650Daytime running light system .. 214
Defogger
Outside rear view
mirrors ....................... 447, 454
Rear window ................ 447, 454
Windshield ................... 447, 454
Dimension ................................ 636
Display
Drive information ........ 110, 115
Dynamic radar cruise
control ............................... 231
Energy monitor .................... 117
Multi-information
display ....................... 109, 112
Warning messages ............... 575D

675Alphabetical index
CT200h_OM_OM76102E_(EE)
Hybrid battery (traction battery)
Location ..................................81
Specification .........................639
Hybrid battery air vent ................82
Hybrid system .............................77
Emergency shut off system ....82
Energy monitor/consumption
screen .................................117
EV drive mode......................201
High voltage components .......81
Hybrid System Indicator ......107
Hybrid system precautions .....81
Hybrid vehicle driving tips ...281
If the hybrid system will
not start...............................620
Overheating ..........................629
Power switch ........................196
Regenerative braking ..............78
Starting the hybrid system ....196
Hybrid System Indicator ...........107
Hybrid transmission ..................203Identification
Engine .................................. 638
Vehicle ................................. 637
Ignition switch (Power switch). 196
Auto power off function ...... 198
Changing the power switch
modes ................................ 198
If your vehicle has to be stopped
in an emergency ................ 561
Starting the hybrid system ... 196
Illuminated entry system .......... 463
Immobilizer system .................... 87
Indicators .................................. 100
Initialization
Items to initialize ................. 661
Tire pressure warning system ....
512
Inside rear view mirror ............. 172
Instrument panel light control .. 106
Interior lights ............................ 461
Switch .................................. 462
Wattage ................................ 647
Intrusion sensor .......................... 96
ISOFIX rigid anchors ................. 67
Jack
Positioning a floor jack ........ 494
Vehicle-equipped jack ......... 592
Jack handle ............................... 592
Jam protection function
Moon roof ............................ 182
Power windows.................... 179I
J