2013 KIA RIO HATCHBACK Owners Manual

Page 153 of 385

KIA RIO HATCHBACK 2013  Owners Manual Features of your vehicle
78
4
Do not use the interior lights for extended
periods when the engine is not running.
It may cause battery discharge.
Map lamp (if equipped) 
1. Push the lens to turn the l

Page 154 of 385

KIA RIO HATCHBACK 2013  Owners Manual 479
Features of your vehicle
Luggage room lamp
The luggage room lamp comes on when
the tailgate is opened.
To prevent unnecessary charging system
drain, close the tailgate securely after
using the lug

Page 155 of 385

KIA RIO HATCHBACK 2013  Owners Manual Features of your vehicle
80
4
If you want to defrost and defog the front
windshield, refer to “Windshield
Defrosting and Defogging” in this section.
Rear window defroster
The defroster heats the w

Page 156 of 385

KIA RIO HATCHBACK 2013  Owners Manual 481
Features of your vehicle
MANUAL CLIMATE CONTROL SYSTEM
1. Fan speed control knob
2. Mode selection knob
3. Temperature control knob
4. Air conditioning button (if equipped)
5. Rear window defroste

Page 157 of 385

KIA RIO HATCHBACK 2013  Owners Manual Features of your vehicle
82
4
Heating and air conditioning
1. Start the engine.
2. Set the mode to the desired position.
To improve the effectiveness of heat-ing and cooling :
- Heating:
- Cooling:
3.

Page 158 of 385

KIA RIO HATCHBACK 2013  Owners Manual 483
Features of your vehicle
Mode selection
The mode selection knob controls the
direction of the air flow through the venti-
lation system.
Air can be directed to the floor, dash-
board outlets, or w

Page 159 of 385

KIA RIO HATCHBACK 2013  Owners Manual Features of your vehicle
84
4
MAX A/C-Level (B, D) (if equipped)
The MAX A/C mode is used to cool the
inside of the vehicle faster.
In this mode, the air conditioning and the
recirculated air position

Page 160 of 385

KIA RIO HATCHBACK 2013  Owners Manual 485
Features of your vehicle
Air intake control 
This is used to select outside (fresh) air
position or recirculated air position.
To change the air intake control position,
push the control button.Re