2013 JEEP GRAND CHEROKEE radio

[x] Cancel search: radio

Page 356 of 704

JEEP GRAND CHEROKEE 2013 WK2 / 4.G Owners Manual The radio uses the following limits for file systems:
•Maximum number of folder levels: 8
•Maximum number of files: 255
•Maximum number of folders. (The radio display of file
names and folder na

Page 357 of 704

JEEP GRAND CHEROKEE 2013 WK2 / 4.G Owners Manual use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or
VBR bit rate.
MPEG Specifi-
cationSampling Fre-
quency (kHz)Bit Rate (kbps)
MPEG-1 Audio
Layer 348, 44.1, 32 320, 256, 224,
192, 160, 128,
112,

Page 358 of 704

JEEP GRAND CHEROKEE 2013 WK2 / 4.G Owners Manual Operation Instructions - Auxiliary Mode
The auxiliary (AUX) jack is an audio input jack, which
allows the user to plug in a portable device, such as an
MP3 player, or iPOD®, and utilize the vehicle

Page 359 of 704

JEEP GRAND CHEROKEE 2013 WK2 / 4.G Owners Manual Power Switch/Volume Control (Rotary)
Push the ON/VOLUME control knob to turn on the
radio. Push the ON/VOLUME control knob a second
time to turn off the radio.
Electronic Volume Control
The electronic

Page 360 of 704

JEEP GRAND CHEROKEE 2013 WK2 / 4.G Owners Manual Clock Setting Procedure
1. Press and hold the TIME button until the hours blink.
2. Adjust the hours by turning the right side TUNE/
SCROLL control knob.
3. After adjusting the hours, press the right

Page 361 of 704

JEEP GRAND CHEROKEE 2013 WK2 / 4.G Owners Manual Setting the Tone, Balance, and Fade
Push the rotary TUNE/SCROLL control knob and BASS
will display. Turn the TUNE/SCROLL control knob to
the right or left to increase or decrease the bass tones.
Push

Page 363 of 704

JEEP GRAND CHEROKEE 2013 WK2 / 4.G Owners Manual By pressing the SEEK button when the Music Type icon
is displayed, the radio will be tuned to the next frequency
station with the same selected Music Type name. The
Music Type function only operates w

Page 364 of 704

JEEP GRAND CHEROKEE 2013 WK2 / 4.G Owners Manual You may add a second station to each pushbutton by
repeating the above procedure with this exception: Press
the SET/RND button twice and SET 2 will show in the
display window. Each button can be set f