2013 INFINITI EX light

10
first drive features
07 INt
AkE AIr CONtrOL BUtt ON (if so equipped)
AIR RE cIRcULATION


Press the intake air control button
to recirculate interior air inside the vehicle. The indicator

light on the
side will come on. This system is used to avoid outside odors and helps to
adjust the inside vehicle temperature more effectively.

The air recirculation mode cannot be activated when the air conditioner is in the front
defrosting mode

.
OUTSIDE AIR cIRc ULATION

Press the intake air control button again to draw outside air into the passenger
compartment. The indicator light on the

side will come on.
AUTOMATIc INTAKE AIR c ONTROL

In the auto mode, the intake air will be controlled automatically. To manually control the
intake air, press the intake air control button. To return to the automatic control mode,
press the intake air control button
for about 2 seconds.
08
A/C BUtt
ON

Press the A/C button to turn the air conditioner system on or off. This system helps cool
and dehumidify the air inside the cabin and defog the windows.
09 OFF BUtt
ON

Press the OFF button to turn the climate control system off.
For more information, refer to the “Instruments and controls (section 2)” and the “Monitor, climate, audio, phone and voice recognition
systems (section 4)” of your Owner’s Manual.

12
first drive features
USB/iPod® Interface (models with Navigation System - if so equipped)
The USB jack
01 is located in the center console under

the arm rest.

when a compatible USB memory device or iPod®
is plugged into the USB jack, compatible audio
and video files stored on the device can be
played through the vehicle’s audio system
and front display.
For more information, refer to the “Monitor, climate, audio, phone
and voice recognition systems (section 4)” of your Owner’s Manual.
Conventional (Fixed Speed) Cruise Control

The cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25 mph.

The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.

To activate the cruise control, push the ON/OFF
switch

01 . The CrUISE indicator light in the
instrument panel will illuminate.

To set cruising speed, accelerate the vehicle to the desired speed, push the COAS t/SEt switch


02 and release. The CrUISE SEt
indicator light
in the instrument panel will illuminate.

Take your foot off the accelerator pedal. Your vehicle will maintain the set speed.

To reset at a faster cruising speed, push and hold the ACCEL/rES switch
03 . when the

vehicle attains the desired speed, release the switch.

To reset at a slower cruising speed, push and hold the COAS t/SEt switch
02 . Release the

switch when the vehicle slows to the desired speed.

To cancel the preset speed, tap the brake pedal or push the CANCEL switch
04 .

To turn off cruise control, push the ON/OFF switch
01 . Both the CrUISE indicator light and

the SEt indicator light
in the instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
04
03
02
01
01

13
Intelligent Cruise Control (ICC) System (if so equipped)
VEHIcLE-TO-VEHIcLE DISTANcE cONTROL MODE


To set Vehicle-To-Vehicle Distance c ontrol mode,
press the CrUISE ON/OFF button
01 for less
than 1.5 seconds. The CrUISE indicator light
02
will illuminate.

Accelerate to the desired speed.

Push down on the COAS t/SEt switch
03 and release
it. cruise control will be set to the desired speed.

Press the distance button
04 repeatedly to change
the set distance between long, middle, and short.

when a vehicle is not detected ahead of you in the
lane, the set distance and set vehicle speed indicator
lights will illuminate

05 in set mode.

when a vehicle is detected ahead of you in the lane,
the vehicle ahead detection, set distance, and set
vehicle speed indicator lights will illuminate

06 in set mode.

To reset at a faster cruising speed, push up and hold the ACCEL/rES
switch

07 . w
hen the vehicle attains the desired speed, release
the switch.

To reset at a slower cruising speed, push down and hold the COAS t/SEt switch
03 . Release

the switch when the vehicle slows to the desired speed.

To cancel the preset speed, push the CANCEL switch
08 or tap the brake pedal
. The set
vehicle speed indicator
05 will go out.

To turn off cruise control, press the CrUISE ON/OFF button
01 . The
CrUISE indicator light

02 , in the instrument panel, will turn off.
To set conventional (fixed speed) cruise control mode:

while cruise control is off, press the CrUISE ON/OFF
button
01 and hold it down for more
than 1.5 seconds. The CrUISE indicator light will illuminate.

Accelerate to the desired speed.

Push down on the COAS t/SEt switch and release it. The SEt indicator light will illuminate.
c ruise control should be set to the desired speed.
To switch between the two cruise control modes:

when one of the two cruise modes is in use, you must turn the system off, and then turn it on
again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
08
07
03
01
04
0205
06

21
06 INFINITI c
ontroller
• ENtEr button – Press to select the highlighted item on the screen. If this button is pressed
while a map is displayed, the map menu screen is displayed.
• Main directional buttons – Use to move across the map, highlight an item on the screen or
adjust a setting (volume, brightness, etc.).
• Additional directional buttons – Use to move across the map or highlight an item on the
character input screen.
• center dial – Use to highlight an item on the screen or adjust a setting. The center dial can
also be used to adjust the map scale.
07 INFO button – Press to display the vehicle (if so equipped), weather (if so equipped) or voice

recognition information.
08 button – Press to switch between the day screen (bright) and the night screen (dark).

Press and hold to turn off the display. Press again to turn on the display.
09 ZOOM IN button – Press to zoom the map in.

10 MAP button – Press to display the map.
while following a programmed route, press multiple
times to change the type of route information displayed.
11 SEttING button – Press to access the system settings.

12 BAC
k button – Press to return to the previous screen. In a settings screen, this button is also
used to apply the setting. In a character input screen, this button is also used to delete the
characters that have been entered.
13 VOICE button – Press to hear the current guidance for a programmed route.

For more information, please refer to your Navigation System Owner’s Manual.
DVD Player (if so equipped)

with this DVD Player, you can play video files via a
DVD or cD from the front display.

To view movies on the front display, stop the vehicle
in a safe location, move the shift lever to the P (PArk)
position and apply the parking brake.

To reduce driver distraction, movies will not be shown
on the front display while the vehicle is in any drive
position.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.

HomeLink® Universal Transceiver (if so equipped)
The HomeLink® system can learn and consolidate the functions of up to three different hand-
held transmitters, operating items such as garage doors, property gates, outdoor and indoor
lights or alarm systems.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink® website at
www.homelink.com or call 1-800-355-3515.
22
HOMELINK®
system guide