Page 5 of 39
FEATURES
•6.2L Boss V8 engine
•6R80 6-speed automatic transmission
•4x4 electronic shift-on-the-fly transfer case
•Modified rear differential capable of locking in 2H, 4H and 4L
•Torsen helical front differential for increased capability
•4.10 front and rear axle ratios
•35 tooth spline rear axle shafts for increased capability
•Super Cab or Crew Cab – 5.5 foot box with unique outer box
•Box graphics
•Hood with functional air extractors
•Hood graphics
•Unique grille
•Front off-road camera
•Front camera washer
F-150 SVT Raptor-specific features
4
2013 F-150(f12)
Supplement, 1st Printing
USA(fus)
Page 33 of 39
Item CapacityFord part name or
equivalentFord part number /
Ford Specification
Rear axle fluid friction
modifier4 oz. (118 ml) Additive Friction ModifierXL-3
EST-M2C118-A
SuperCab fuel tank 26 gallons (98.4L) — —
CrewCab fuel tank 36 gallons (136.3L) — —
Transmission fluid
3
12.4L
(13.1 quarts)
4
Motorcraft
MERCONLV AT FXT-10-QLV /
MERCONLV
Transfer case lubricant1.4-1.5L
(2.9-3.1 pints)Motorcraft Transfer Case
FluidXL-12 / —
1Add the coolant type originally equipped in your vehicle.2Fill 6 millimeter to 14 millimeter (1/4 inch to 9/16 inch) below bottom of fill hole.
Your vehicle’s rear axle is filled with a synthetic rear axle lubricant and is considered lubricated for
life. These lubricants do not need to be checked or changed unless a leak is suspected, service is
required or the axle assembly has been submerged in water. The axle lubricant should be changed
any time the rear axle has been submerged in water.3Ensure the correct automatic transmission fluid is used. Transmission fluid requirements are
indicated on the dipstick or on the dipstick handle. Check the container to verify the fluid being
added is of the correct type. Refer to yourscheduled maintenance informationto determine the
correct service interval.4Approximate dry fill capacity including transmission fluid cooling system, actual refill capacities
will vary based on vehicle application and transmission fluid cooling system (i.e. coolers size,
cooling lines, auxiliary cooler capacities). The amount of transmission fluid and fluid level should
be set by the indication on the dipstick’s normal operating range.5Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the
requirements of Ford specification WSS-M2C945-A and the API Certification mark.
Maintenance
32
2013 F-150(f12)
Supplement, 1st Printing
USA(fus)
Page 39 of 39
A
Air cleaner filter .........................30
Automatic transmission
fluid, refill capacities ................31
Axle
refill capacities ..........................31
B
Battery
replacement, specifications .....30
C
Capacities for refilling fluids ......31
Coolant
refill capacities ..........................31
E
Engine ............................................8
refill capacities ..........................31
service points ..............................7
Engine oil
filter, specifications ..................30
refill capacities ..........................31
F
Fluid capacities ...........................31
Fuel
capacity .....................................31
filter, specifications ..................30
octane rating .........................8, 33I
Ignition ...........................................8
M
Motorcraftparts ........................30
O
Octane rating ..............................33
P
Parts (see Motorcraftparts) ...30
S
Spark plugs, specifications .....8, 30
T
Tires
changing ....................................33
rotating ......................................33
Towing
wrecker ......................................28
Transmission
fluid, refill capacities ................31
U
Upfitter controls .........................15
W
Wrecker towing ...........................28
Index
38
2013 F-150(f12)
Supplement, 1st Printing
USA(fus)
