Optional bead-lock compatible wheel
If your SVT vehicle is equipped with the optional bead lock compatible
wheel, you have the ability to convert this wheel to use a true bead-lock
ring, which allows operation at low tire pressures when off-road to
minimize risk of de-beading the tire. See your local Ford Racing Parts
Dealer for more information.
Note:Converting the bead-lock compatible wheel to true bead-locks is
for off-road use only. On road driving is not permitted.
Note:SVT only recommends using bead-lock rings from Ford Racing, in
conjunction with the OEM tire. Any other combination using this wheel
could result in air loss or tire failure.
OPERATING A PERFORMANCE VEHICLE AT HIGHER THAN
NORMAL SPEEDS
Your SVT vehicle is capable of operating at higher than normal off-road
speeds and is equipped with tires rated for the vehicles’ maximum speed.
However, it is important to remember to always drive safely, obey all
traffic laws and only operate your SVT vehicle at higher than normal
speeds at locations and under conditions where such can be done safely.
Also, before operating your vehicle at higher than normal speeds:
•Make sure your tires are at the correct tire pressure. (see theTires
section of this supplement for more information).
•Inspect wheels and tires for wear and damage. Replace any damaged
wheels or tires.
•Never operate the vehicle at higher than normal speeds when loaded
with passengers/cargo.
WINTER DRIVING
The original equipment tires on your SVT vehicle are designed for
maximum performance in all driving conditions. However, they are not
designed to be used with snow chains. If you will be operating your
vehicle with snow chains, use a smaller tire and wheel combination as
recommended in theOwner’s Manual
Tire Information
36
2013 F-150(f12)
Supplement, 1st Printing
USA(fus)
