209Practical information
Removing a wheel
Parking the vehicle
Immobilise the vehicle where it does notblock traffic: the ground must be level, stable and not slippery. Apply the parking brake unless it has been programmed to automatic mode, switch off the ignition and engage firstgear *
to block the wheels. Check that the braking warning lamp and the Pwarning lamp in the parkingbrake control lever come on.
The occupants must get out of the vehicle and wait where they are safe.
Never go underneath a vehicle raised using a jack; use an axle stand.
)
Depending on equipment, remove the cover from from each of bolts using the tool 3
or removethe hub cap using tool 4. )
Fit the security socket 5
on the wheelbrace 1
to slacken the security bolt (if fitted). )
Slacken the other bolts (no more than a 1/4 turn) using the wheelbrace 1
only.
*
position R
for the electronic
gearbox system; Pfor the automatic gearbox.
List of operations
