2013 Citroen C4 PICASSO RHD warning

22
Familiarisation
Stop & Start
Going into engine STOP mode
The "ECO" warning lamp comes on in
the instrument panel and the engine
automatically goes into standby:
-with a manual gearbox , at speeds below
12 mph (20 km/h), when you put the
selector lever into neutral, and you release
the clutch pedal,
- with a 6-speed electronic
gearbox, at
speeds below 5 mph (8 km/h), when youpress the brake pedal or when you put the
selector lever in position N.-with an automatic gearbox , with the
vehicle stationary, when you press the
brake pedal or when you put the selector
lever in position N.
In some circumstances, ST
OP mode may not
be available; the " ECO" warning lamp flashes
for few seconds, then goes off.
160

Going into engine START mode
The "ECO" warning lamp goes off
and the engine restarts automatically:
-with a manual gearbox, when you fullydepress the clutch pedal,-with a 6-speed electronic gearbox:


●
selector lever in position Aor M
, when
you release the brake pedal,

●
or selector lever in
position Nand brake
pedal released, when you change to
position Aor M ,

●
or when you engage reverse. -with an automatic gearbox:


●
selector lever in position Dor M
, when you release the brake pedal,

●
or selector lever in position Nand brake
pedal released, when you change to
position Dor M ,

●
or when you engage reverse.

161

Driving safely

30
Monitoring
ButtonCorresponding functionComments
DiagnosticList of current alerts.
Lane depar ture warning system
Activation of the function.
Parking sensorsDeactivation of the function.
Inter-vehicle tim
e Activation of the function.
Automatic headlamp dipping
Activation of the function.

1
35
Monitoring
instrument panel, by choosing:
- a colour scheme,
- a display mode.
Choosing a colour scheme
It depends on the colour scheme chosen for
the touch screen tablet. To modify it with the
vehicle stationary: ) select the "Configuration
" menu of the
touch screen tablet,
) press the "Color schemes" button,)
choose a colour scheme, )
confirm.
The system restar ts to take account of the
m
odifications to the touch screen tablet
and the instrument panel. Each mode corresponds to the t
ype of
information displa
yed in the configurable area.
Personalisation of
the type 2 instrument panel
Displa
y zones
Whatever the display mode or colour scheme chosen, the instrument panel contains


- a fixed display zone A
with:
●
the speedometer,
●
the warning lamps,
●
the
fuel gauge,
●
the various repeated information and
alert messages.

- a configurable display zone B .



Choosing the display mode



- "DIALS": permanent display of the
trip computer, rev counter and coolant
temperature indicator.
Most of the warnin
g lamps do not have a fixedposition.
The warning and indicator lamps in the lefthand column are displayed from top to bottom
in order of importance.
For cer tain functions that have indicator lamps for both on and off, there is just one dedicated
location.

38
Monitoring
Indicator and warning lamps
Cer tain warning lamps may come on inone of two modes: fixed (continuous) or flashing.
Only by relating the type of illuminationto the operation of the vehicle can it be determined whether the situation isnormal or a fault has occurred. In the event of a fault, the illumination of the warning lamp may be accompanied bya message.
Refer to the tables on the following pages for more information. Visual indicators informin
g the driver that a system is in operation, switched off or has a
fault.
When the ignition is switched on
Certain warning lamps come on for a fewseconds in the instrument panel when the
vehicle's ignition is switched on.
When the en
gine is started, these same
warning lamps should go off.
If they remain on, before moving off, refer to the
information on the warning lamp concerned.


Associated warnings

The switching on of cer tain warning lamps may be accompanied by an audible signal and a
message.
The warning lamps may come on continuously (fixed) or flash.


The position of the warning lamps in the type 2 instrument panel depends on thecolour scheme selected.

1
39
Monitoring

Operation indicator lamps

If one of the following indicator lamps comes on in the instrument panel, this confirms that the corresponding system has come into operation.

Warning / indicator lampStateCauseAction / Observations
Left-hand directionindicator
flashing with buzzer. The lighting stalk is pushed down.
Right-hand direction indicator
flashing with buzzer.The lighting stalk is pushed up.
Sidelamps

fixed. The lighting stalk is in the
"Sidelamps" position.
Dipped beamheadlamps fixed. The lighting stalk is in the "Dipped
beam headlamps" position.
Main beam headlamps
fixed. The lighting stalk is pulled towardsyou. Pull the stalk to return to dipped beam headlamps.

40
Monitoring
Automatic headlamp dipping
fixed.The lighting control stalk is in the
"AUTO" position, pulled towardsyou, and the function is activated (" Driving assistance" menu).
The system is in dipped beam modeas there is sufficient ambient lightand/or the traffic conditions do notallow illumination of main beam.The camera, located in the door mirror, mana
ges the
operation of main beam, depending on the ambient
lighting and driving conditions.
Pullin
g the lighting stalk again to deactivate.
For more information on this function, refer to the Visibility section.
fixed.The lighting control stalk is in the
"AUTO" position, pulled towardsyou, and the function is activated (" Driving assistance" menu).
The system is in main beam mode as the ambient lighting and trafficconditions allow it.
Warning / indicator lampStateCauseAction / Observations
Rear foglampsfixed.The rear foglamps are switched on. Turn the ring on the stalk rear wards to switch off the
rear foglamps.
Front foglampsfixed.The front foglamps are switched on. Turn the ring on the stalk rear wards twice to switch off
the front foglamps.

For more information on the lighting controls, refer to the corresponding section.

1
41
Monitoring
Warning / indicator lampStateCauseAction / Observations
Electric parking brake
fixed. The electric parking brake is applied. Release the electric parking brake to switch off the
warning lamp: with your foot on the brake pedal, brieflypush the electric parking brake control lever.
Obser ve the safety recommendations.
For more information on the electric parking brake,
refer to the corresponding section.
Diesel engine pre-heating
fixed. The "START/STOP" switch has been pressed (ignition on). Wait until the warning lamp goes off before star ting.
Once it goes off, star ting is immediate, on condition
that you maintain pressure on the brake pedal for anelectronic or automatic gearbox, or the clutch pedal is pressed fully down for a manual gearbox.
The period of illumination of the warning lamp is
determined by the ambient conditions (up to about
thirty seconds in extreme conditions).
If the engine does not star t, switch the ignition off and
then on, wait until the warning lamp goes off again,
then start the engine.
Blind spotsensors fixed. The blind spot monitoring function has been activated. For more information, refer to the correspondingsection.
Park Assist fixed. The Park Assist function has beenactivated. For more information, refer to the correspondingsection.

42
Monitoring
Warning / indicator lampStateCauseAction / Observations
Automatic wipingfixed. The wiper control is pushed downwards. Automatic front wiping is activated.
To deactivate automatic wiping, operate the controlstalk downwards or put the stalk into another position.
Passenger airbag systemfixed. The control switch, located at thepassenger's end of the dashboard, isin the "ON" position.
The passenger's front airbag is activated.In this case, do not install arearwards-facing child seat on the front passenger seat. T
urn the control switch to the "OFF"position to
deactivate the front passenger's airbag.
In this case you can install a rear wards-facing childseat.
Stop & Startfixed. When the vehicle stops (red lights,
traffic jams, ...) the Stop & Star t systemhas put the engine into STOP mode.The warnin
g lamp goes off and the engine restarts
automatically in START mode, as soon as you want tomove off.
flashes for a few seconds, then goes
off.
STOP mode is temporarily unavailable.
or STA R T m o d e i s i n v o ke dautomatically. For more in
formation on special cases with STOP mode and START mode, refer to the "Stop & Start"
section.