2013 Citroen C4 PICASSO height

91
3
Comfort
Front armrest

Height adjustment
)Fully lower the armrest. )Raise it to the required position (low,
intermediate or high). )Once in the high position, lift to release it and return it to the low position.


Comfor t system for the driver and front passenger.

103
3
Comfort








Steering wheel adjustment
)
When stationary, pull the control lever to yrelease the adjustment mechanism. )
Adjust the height and reach to suit your driving position.)
Push the control lever to lock theadjustment mechanism.

As a safety precaution, these operations should only be carried out while the vehicle is stationary.
Child surveillance mirror

A child surveillance mirror is fitted above the rear view mirror. This allows you to monitor the
vehicle’s rear passengers, or it can facilitateconversation between the front and rear passengers without the need to move the rear
view mirror.
It can be folded awa
y to eliminate dazzle.

216
Visibility
Screenwash and washer jets
Windscreen wash and
headlamp wash
Adjusting the jets
The front washers include an adjustment for the
height of delivery from the jets.
If you want to modify the factory setting, turn
the screw on each jet anti-clockwise, towards
the "+" to raise the jet or clockwise, towards the "-" to lower it.

Headlamp wash
)Pull the windscreen wiper stalk towards
you. The windscreen wash then the
windscreen wi
pers operate for a fixed period.
A few moments after releasing the wiper stalk,
there is a last wipe to clear any runs from thescreen. The headlam
ps operate when the vehicle is moving and when the dipped beam headlamps
are on. However, to reduce the consumption
of screenwash fluid, the headlamp wash onl
yoperates with every 7th use of the screenwash
or once every 25 miles (40 km), during a given journey.

230
Safety
Seat belts
Front seat belts
The front seat belts are fitted with a pretensioning and force limiting system.
This system improves safety in the frontseats in the event of a front or side impact.
Depending on the severity of the impact, thepretensioning system instantly tightens the seat
belts against the body of the occupants.
The pretensioning seat belts are active when
the ignition is on.
The force limiter reduces the pressure of the
seat belt on the chest of the occupant, soimproving their protection.




Seat belt reels with reversiblepretension

This system provides automatic adjustment of
the tension of the driver's and passenger's seatbelts after fastening, once the vehicle's speed
is above 6 mph (10 km/h).
In addition, as soon as the system detects a
potentially dangerous driving situation, this
system reacts by drawing in slack in the belt, (for example, under heavy or sharp braking or
sudden avoiding manoeuvres). By automatically
increasing the tension of the seat belts, the
system holds the driver and passenger against
their seat backrests.
Once the driving situation returns to normal, the belt reel is released: the belt tension returns to
the initial level of comfort.
Deactivation of the passenger's airbagcauses deactivation of the reversible seat belt reel on the passenger's side.

Front seat belt anchorage height adjustment
)To a djust the height of the anchorage point, squeeze the control and slide it up or down
to the desired notch.

242
Safety








Child seat in the front
"Rearward facing"
When a "rear ward-facing" child seat isinstalled on the front passenger seat, adjust
the vehicle seat to the midway longitudinalposition, the lowest height position, backrest straightened. Then pull the height control lever
11 t i mes.
The passenger's airbag must be deactivated. Otherwise, the child risks being seriously injured or killed if the airbag is deployed.

"Forward facing"

When a "rear ward-facing" child seat is installed on the front passenger seat, adjust
the vehicle seat to the midway longitudinal
position, the lowest height position, backrest
straightened. Then pull the height control lever
11 times. Leave the passen
ger's airbag active.
Passenger seat in the midway longitudinal position, the lowest height position, then
the height control lever pulled 11 times.
Ensure that the seat belt is properly tightened. For child seats with a stay, ensurethat this is in firm and steady contactwith the floor. If necessary, adjust the passenger's seat.

248
Safety













Installation of child seats secured using
the seat belt
Seat
Weight of the child /indicative age /
Groups 0 (b) and 0+Bir th to 13 kgGroup 1From 9 to 18 kgGroup 2From 15 to 25 kgGroup 3From 22 to 36 kg

1st
row
Front passenger seat (c)
- fixed
UUUU
- height adjustable
U(R)U(R)U(R)U(R)

2 ndrow
Fixed outer rear seats ( d )
UUUU
Outer rear seats with longitudinal adjustment ( d ) ( e) eUUUU
Centre rear seat ( d )
UUUU
In accordance with European regulations, this table indicates the options for installing child seats secured using the seat belt and universally approved (a)in relation to the weight of the child and the seat in the vehicle.

249
6
Safety
(a) Universal child seat: child seat which can be
installed in all vehicles using the seat belt.
(b) Group 0: from birth to 10 kg. Infant car seats and "car cots" cannot be installed on thefront passenger seat. When installed in the 2nd
row, they may prevent use of the other seats.
(c) Consult the legislation in force in your country before installing your child on
this seat.
(d) To install a child seat on a rear seat,
"rear ward facing" or "for ward facing", move
the front seat for ward, then straighten the
backrest to allow enough space for the childseat and the child's legs.
( e ) To install a child seat on a rear seat,"rearward facing" or "forward facing", adjust
the rear seat to the fully back position, with
the backrest upright.
Remove and stow the head restraintbefore installing a child seat on a passenger seat. Refit the head restraint once the child seat has been removed.
U
: seat suitable for the installation of a child seat secured using the seat belt anduniversally approved "rear ward facing" and/or "for ward facing", with the passenger seat
adjusted to the midway longitudinal position.U(R): same as U , with the passenger's seatadjusted to the low position with
11 actions on the height control lever and
in the midwa
y longitudinal position.

250
Safety














Installation of child seats secured using
the seat belt
In accordance with European regulations, this table indicates the options for installing child seats secured using the seat belt and universally approved (a)in relation to the weight of the child and the seat in the vehicle.
Seat
Weight of the child /indicative age /
Groups 0 (b) and 0+
Bir th to 13 kg
Group 1
From 9 to 18 kg
Group 2
From 15 to 25 kg
Group 3
From 22 to 36 kg

1st
row
Front passenger seat (c)
- fixed
UUUU
- height adjustable
U(R)U(R)U(R)U(R)
2ndrow
Outer rear seats
UUUU
Outer rear seats with
longitudinal adjustment ( d ) ( e) eUUUU
Centre rear seat ( d )
UUUU

3rdrowOuter rear seasUUUU