2013 Citroen C3 PICASSO RHD belt

7
Child safety
107













Installing child seats attached using the seat belt
In accordance with European regulations, this table indicates the options for installing child seats secured using a seat belt and universally approved (a)in accordance with the weight of the child and the seat in the vehicle.
a
Universal child seat: child seat that can be installed in all vehicles using a seat belt.b:Group 0: from birth to 10 kg. Shells seats and baby carriers cannot be installed in the front passenger seat.c :Consult the legislation in force in your country before installing your child on this seat. U: Seat suitable for the installation of a child seat secured using a seat belt and universally approved, "rear wards-facing" and/or "for wards-facing".
X:Seat position not suitable for installation of a child seat for the weight class indicated.
CITROËN recommends that children travel in the rear seats, with the rear seats in the fully back position.
Weight of the child and indicative age
SeatUnder 13 kg(groups 0 (
b ) and 0+)
Up to approx 1 year
From 9 to 18 kg(group 1)1 to 3 years approx
From 15 to 25 kg(group 2)
3 to 6 years approx
From 22 to 36 kg(group 3)
6 to 10 years approx

Front passenger seat(
c )UUUU
Outer rear seats UUUU
Centre rear seat XXXX

Child safety
108
The incorrect installation of a child seat in a vehicle compromises the child's protection inthe event of an accident.

Remember to fasten the seat belts or the child seat harnesses keeping the slackrelative to the child's body to a minimum,even for shor t journeys.
When installing a child seat using the seat belt, ensure that the seat belt is tightenedcorrectly on the child seat and that it securesthe child seat firmly on the seat of your vehicle. If your passenger seat is adjustable,move it for wards if necessary.
For optimum installation of the "forwards-facing" child seat, ensure that the back of the child seat is in contact with the back of the vehicle's seat and that the head restraint does not cause any discomfor t.
If the head restraint has to be removed,ensure that it is stored or attached securelyto prevent it from being thrown around the vehicle in the event of sharp braking.
Children under the age of 10 must not travel in the "forwards-facing" position on the frontpassenger seat, unless the rear seats are
already occupied by other children, cannot be used or are absent.
Deactivate the passenger airbag when a "rearwards-facing" child seat is installed on the front seat.
Other wise, the child would risk being seriously injured or killed if the airbag were to inflate.
As a safety precaution, do not leave:- a child or children alone and unsupervised in a vehicle,
- a child or an animal in a vehicle whichis exposed to the sun, with the windows closed, - the keys within reach of children inside the vehicle. To prevent accidental opening of the doors and rear windows, use the "Child lock".Take care not to open the rear windows by more than one third. To protect young children from the rays of thesun, fit side blinds on the rear windows.





Advice on child seats


Installing a booster seat

The chest par t of the seat belt must be positioned on the child's shoulder withouttouching the neck.
Ensure that the lap part of the seat belt passes correctly over the child's thighs.
CITROËN recommends the use of a booster seat which has a back, fitted with a seat belt guide at shoulder level.

7
Child safety
109











"ISOFIX" mountings

There are 3 rings for each seat:


- 2 rings A, located between the backrest and the seat cushion, identified by a label,- a rin
g B
, located in the roof, with the TOPTETHER
logo, for fixing the top tether belt. This IS
OFIX mounting system provides reliable,safe and fast fitting of the child seat in your
vehicle.
ISOFIX child seat
sare fitted with two latcheswhich are secured easily on these rings A.
Some also have a top tether belt
which can beattached to ring B.

To attach this belt, raise the head restraintof the seat, then pass the buckle between
the rods. Then fix the buckle on ring B,
then tension the top tether belt. Your vehicle is approved to the IS
OFIXregulations .
The seats represented below, are fitted with
re
gulation ISOFIX mountings.
If a child is not installed in a vehicle correctly, the child's protection in the event of a collision will be compromised.
To know which I
SOFIX child seats can be
installed in your vehicle, see the table of seating positions for ISOFIX child seats.
The rear seats must be in the fully back position
to install ISOFIX seats.

Child safety
110
















ISOFIX child seat recommended by CITROËN and approved for
your vehicle

RÖMERDuo Plus ISOFIX (size category B1)
Group 1: from 9 to 18 kg




Installed only in the forwards-facing position.
Fitted with an upper strap to be secured on the upper ring B
, referred to as the TOP TETHER.
Three seat body angles: sitting, reclining, lying.
Adjust the front seat of the vehicle so that the child's feet do not touch the back of the seat.
Can be installed for wards-facing by attaching it to the seat using a three-point seat belt

This child seat can also be used on seats which are not fitted with ISOFIX mountings. In this case, it must be attached to the vehicle seat using the three point seat belt.Follow the instructions for fitting the child seat given in the seat manufacturer's installation guide.

7
Child safety
111













Table of seating positions for ISOFIX child seats
In accordance with European Regulations, this table indicates the options for installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX mountings.
In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A
to G
, is indicated on the childseat next to the ISOFIX logo.
IUF:seat suitable for the installation of an Isofix U
niversal seat, "F
orwards-facing" secured using the top belt.IL- SU:seat suitable for the installation of an I sofix S emi-U
niversal seat either:


- "rearwards-facing" fitted with a top belt or a stay,

- "forwards-facing" fitted with a stay,

- a shell seat fitted with an upper strap or a stay.
For advice on securing the top tether belt, refer to the "Isofix mountings" section.

*
The IS
OFIX infant car seat (shell seat), secured on the lower rings of a vehicle ISOFIX seat, occupies two rear seats.
Weight of the child
/ indicative age
Less than 10 kg
(group 0)Up to approx. 6 months
Less than 10 kg(group 0)Less than 13 kg(group 0+)Up to approx. 1 year
From 9 to 18 kg (group 1)From approx. 1 to 3 years
Type of ISOFIX child seatShell"rearwards-facing""rearwards-facing""forwards-facing"
ISOFIX size categoryFGCDECDABB1
ISOFIX universal and semi-universal child seats which can be installed on the outer rear seatsIL-SU*IL-SUIL-SUIUF
IL-SU

8
Safety
117

Seat belt not fastened / unfastened warning lamp Fastenin
g
) Pull the strap, then inser t the tongue in thebuckle. )
Check that the seat belt is fastened correctly by pulling the strap.



Height adjustment
)
To lower the attachment point, squeeze the control A
and slide it downwards.)
To raise the attachment point, slide thecontrol A
upwards.
When the ignition is switched on, this warning lamp comes on, either on theinstrument panel or on the seat belt andpassenger's front airbag warning lamp
display, if the driver and/or the frontpassenger has not fastened their seat belt.
Unfastening
) Press the red button on the buckle. )
Guide the seat belt as it rolls up.


Seat belts


Front seat belts


The front seat belts are fitted with apretensioning and force limiting system.
This s
ystem improves safety in the frontseats in the event of a front or side impact.
Depending on the severity of the impact, thepretensioning system instantly tightens the seat
belts against the body of the occupants.
The pretensioning seat belts are active when
the ignition is on.
The
force limiter reduces the pressure of the seat belt on the chest of the occupant, so
improving their protection.
From approximately 12 mph (20 km/h) this warninglamp flashes for two minutes accompanied by an audible signal. Once these two minutes have
elapsed, this warning lamp remains on until the driver and/or the front passenger fastens their seat belt.

Safety
118
Seat belt not fastened / unfastened warning lamp display
1. Front and/or rear seat belts not fastened / unfastened warning lamp. 2.
Front left seat belt warning lamp. 3.Front right seat belt warning lamp. 4.
Rear right seat belt warning lamp. 5.
Rear centre seat belt warning lamp.
6.Rear left seat belt warning lamp.


Rear seat belts

The rear seats are each fitted with a three-point
iner tia reel seat belt with force limiter (with the exception of the rear centre seat).

Locking
When the rear side side belts are not being used, you can lock them in place. To do so:)
Raise the grip Ato its maximum height.



Fastening
)
Pull the strap, then inser t the tongue in the buckle. )
Check that the seat belt is fastened correctly by pulling the strap.


Unfastening
)
Press the red button on the buckle. )
Guide the seat belt as it rolls up.

The correspondin
g warning lamp 2 or 3
comes
on in red on the seat belt and passenger's front airbag warning lamp display if the seat belt isnot fastened or is unfastened.



Seat belt unfastened warninglamp

This warning lamp comes on,either on the instrument panel or
on the seat belt and passenger's
front airbag warning lamp display, when one or more rear passengers unfasten their seat belt.
From approximatel
y 12 mph (20 km/h),
this warning lamp flashes for two minutes
accompanied by an audible signal of increasingvolume. Once these two minutes have elapsed,
this warning lamp remains on until the one or more rear passengers fasten their seat belt.

8
Safety
119
2 nd row rear centre seat
belt


Removal and storing
)
Press the red button on the buckle B, then on the buckle A.)
Guide the strap as it rolls up and bring the
tongue B , then A
onto the magnet of the
attachment point on the roof.
Installation
) Pull the strap and inser t the tongue A
in the left-hand buckle.)
Inser t the tongue Bin the right-hand buckle. )
Check the fastening of each buckle by
pulling the strap. Th
e seat belt for the rear centre seat of the 2 nd row is incorporated at the rear left of the roof.


Seat belt unfastened warninglamp display
When the ignition is switched on, thecorresponding warning lamps 4 , 5and 6
come
on in red for approximately 30 seconds, if the seat belt is not fastened.
When the en
gine is running or the vehicle ismoving, the corresponding warning lamp 4 , 5or 6
comes on in red, accompanied by an audiblesignal and a message on the multifunction screen, if a rear passenger has unfastened their seat belt.