Page 40 of 284
Multifunction screens
38
Display adjust
Once the "Display adjust" menu has been selected, you can gain access to the following settings:
- year,
- month,
- day,
- hour,
- minutes,
-
12 or 24 hour mode. Setting the date and tim
e )Press the MENUbutton )Select "Display adjust" using the " " or "
"button. )Press OK
to confirm the selection. )Select the "Year" function using the "
"or " " button. )Press OK
to confirm the selection. )Choose the desired value, using the " "or "
" button. )Press OK
to confirm the selection. )Repeat the procedure for the "Month",
"Day", "Hour", and "Minutes" settings.
) Once you have selected a setting, press
the " " or "
" buttons to change its value.
)
Press the " " or " " buttons to switch
respectively to the previous or next setting. ) Press the "OK"
button to record the change and return to the normal display or
press the "Back"button to cancel.
Options
Once the "Options" menu has been selected, you can star t diagnostics of the status of the equipment (active, not active, faulty).
Vehicle confi guration
Once the "Vehicle Configuration" menu hasbeen selected, you can activate or deactivate
the following equipment:
- wiper linked with reverse gear (refer to the"Visibility" section),
- "guide-me-home" lighting (refer to the "Visibility" section).
Page 41 of 284
2
Multifunction screens
39
Language
Once the "Language" menu has been selected, you can change the language used
by the display
(Français, Italiano, Nederlands, Portugues, Portugues-Brasil, Deutsch, English, Espanol).
For safety reasons, configuration of themultifunction screen by the driver must only be done when stationary.
Once the fuel consumption unit has been changed to mpg, the informationrelating to speed and distance also changes to miles.
Units
Once the "Units" menu has been selected, you can change the units of the followingparameters:
- temperature (°C or °F),
- fuel consumption (l/100km, mpg or km/l).
Page 43 of 284
2
Multifunction screens
41
Options
Once the "Options" menu has been selected, you can star t diagnostics of the status of the
equipment (active, not active, faulty).
Language
Once the "Languages" menu has been
selected, you can change the language used
by the display (Français, Italiano, Nederlands,
Portugues, Portugues-Brasil, Deutsch, English,
Espanol).
Units
Once the "Units" menu has been selected, you can change the units of the followingparameters:
- temperature (°C or °F),
- fuel consumption (l/10 0km, mpg or km/l).
The chosen language will also be usedby the eMyWay system colour screen.
For safety reasons, configuration of the multifunction screen by the driver mustonly be done when stationary.
Once the fuel consumption unit has been changed to mpg, the informationrelating to speed and distance also changes to miles.
Vehicle confi guration
Once the "Vehicle configuration" menu has
been selected, you can activate or deactivate
the following equipment:
- wiper linked with reverse gear (refer to the
"Visibility" section),
- "guide-me-home" lighting (refer to the
"Visibility" section),
- daytime running lamps (see the "Visibility" section).
Page 48 of 284
Multifunction screens
46
Choice of language
Once this menu has been selected, you can change the language used by the display (Deutsch, English, Espanol, Français, Italiano,
Nederlands, Portugues, Türkçe, Portugues-Brasil).
Te l ephone menu
With the Audio system on and this menu
selected, you can configure your Bluetooth
hands-free system (pairing), view the various
telephone directories (calls log, ser vices...) and
manage your calls (call, hang up, double call,
secret mode...).
For more information on the "Telephone"
application, refer to the Audio system part in
the "Audio and telematics" section. For safety reasons, configuration of the multifunction screen by the driver mustonly be done when stationary.
Page 57 of 284
3
Comfort
55
The air conditioning only operates when the engine is running.
The driver and
front passenger can
each adjust the temperature to their
requirements.
)Turn control 2or 3 to the left or to the right
respectively to decrease or increase this value. A setting around the value 21 provides
optimum comfor t. However, depending on your requirements, a setting between 18 and 24 isnormal.
You are advised to avoid a left / right settingdifference of more than 3.
Automatic operation
)Press the "AUTO"button. The indicator lamp in the button comes on.
2. Driver's side adjustment
Dual-zone digital air conditioning
We recommend the use of this mode: it permitsautomatic and optimised adjustment of all
of the functions, passenger compartment
temperature, air flow, air distribution and air
recirculation, in accordance with the comfort
value that you have chosen.
This system is designed to operate effectively in all seasons, with the windows closed. The value indicated on the displa
y corresponds
to a level of comfor t and not to a temperature in
de
grees Celsius or Fahrenheit.
1. Automatic comfortprogramme
3. Passenger's side adjustment
On entering the vehicle, if the interior temperature is much colder or warmer than the comfort value, there is noneed to change the value displayed in order to obtain the comfort required. The system corrects the difference in temperature automatically and asquickly as possible.
When the engine is cold, to prevent too great a distribution of cold air, the air flow will reach its optimum levelgradually. In cold weather, it favours the distribution of warm air to thewindscreen, side windows and footwells only.
Page 65 of 284
3
Comfort
63
Fully-folded position
)Move the corresponding front seat forward
if necessary. )Put the rear seat in the fully back position. )Place the head restraints in thelow position. )Pull control A, to release the seat back
which folds easily onto the seat cushion.
The seat fits into the floor, providing acontinuous level floor.
To put the seat back in position: )Pull the seat back backwards until it locks
in place.
)Return the seat cushion to the desired position.
When putting back in position, take care not to jam the seat belts.
Page 66 of 284
Comfort
64
Mirrors
The mirror glass is electrically adjustable.
A lamp located under the mirror shell provides
lighting for the driver's and front passenger'sentry and exit.
This exterior lighting comes on when the
vehicle is unlocked or a door is opened and
stays on for a timed period.
Folding
)From outside: lock the vehicle using the
remote control or the key. )From inside: with the ignition on, pull the control A
in the central position rearwards.
Unfolding
)From outside: unlock the vehicle using theremote control or the key. )From inside: with the ignition on, pull the control A
in the central position rear wards.
Adjustment
)
Move control Ato the right or to the left to select the corresponding mirror. )
Move control Bin all four directions toadjust. )
Return control Ato the central position.
If the mirrors are folded using control A
,they will not unfold when the vehicle is unlocked. Pull again on control A.
The folding and unfolding of the door mirrors using the remote control can bedeactivated by a CITROËN dealer or a qualified workshop.
Never fold or unfold the electric foldingmirrors manually.
The objects obser ved are, in reality, closer than they appear.Take this into account in order to correctly judge the distance of vehicles
approaching from behind.
Door mirrors
Page 73 of 284
4
Access
71
Reinitialisation
Deactivating the rear window and door controls
)For the safety of your children, pressswitch 5to prevent operation of the rear windows irrespective of their position.
With the indicator lamp on, the rear controls aredeactivated.
With the indicator lamp off, the rear controls are
activated.
When the
function is activated,
this warning lamp lights up on the
instrument panel for a few seconds.
This control also deactivates the interior rear door controls (see "Child safety - Electric child lock" section).
In the event of contact during operationof the windows, you must reverse themovement of the window. To do this, pressthe switch concerned.
When the driver operates the passenger
electric window switches, they must ensure that no one is preventing correct closing of the windows.
The driver must ensure that the passengers use the electric windows correctly.
Be aware of children when operating thewindows.
Safety anti-pinch
The one-touch electric windows are fitted with
a safety anti-pinch function.
When the window rises and meets an obstacle, it stops and partially lowers again.
In the event of unwanted opening of the window on closing (for example in the presence of frost): )
press the switch until it openscompletely, )
then pull it immediately until itcloses, )
continue to hold the switch for approximately one second after thewindow has closed.
The safety anti-pinch function is not active during these operations.
In the event of a malfunction you must reinitialise
the o
peration of the electric windows: ) release the switch and pull it again until the
window closes completely, ) hold the switch for approximately onesecond after closing,
)
press the switch to lower the window
automatically.
The safety anti-pinch function is not active
during these operations. Always remove the key from the ignition when
leaving the vehicle, even for a shor t time.
