Practical information
152
Temporary puncture repair kit
Description of the kit
A.
"Sealant" or "Air" position selector.
B. On "I"
/ off "O"
switch.C.
Deflation button. D.Pressure gauge (in bar or p.s.i.). E.Compartment housing:
- a cable with adaptor for 12 V socket,
- various inflation adaptors for
accessories, such as balls, bicycle
t
yres...F
.Sealant car tridge.G. White pipe with cap for repair.
H. Black pipe for inflation.I.
Speed limit sticker.
Access to the kit
This kit is installed in the storage box, under
the boot floor.
The speed limit sticker Imust be affixed to the vehicle's steering wheel to remind you that a wheel is in temporary use.
Do not exceed a speed of 50 mph (80 km/h) when driving with a tyre repaired using this type of kit. Complete s
ystem consisting of a compressor and a sealant car tridge which permits
temporary repair of a tyre so that you can rdrive to the nearest garage.It is designed to repair most punctures which could affect the tyre, located on the tyre tread or shoulder.
Technical data
198
Identifi cation markings Various visible markings for the identification of your vehicle.
A.Vehicle Identification Number (VIN) on
the front right door pillar.This number is engraved on the bodyworknear the hinge.
For access to it, open the right-hand door.B
.VIN on the windscreen lower crossmember. The number is on a self-adhesive label
which is visible through the windscreen.
C.Manufacturer's label. This number is indicated on a self-
destroying label affixed to the centre pillar,
on the left-hand side.
The inflation pressures must be checked when the tyres are cold,at least once a month.
If the inflation pressures are too low, this increases fuel consumption.
D.Tyre/paint label. This label is affixed to the centre pillar, on the left-hand side.
It bears the followin
g information:
- the tyre inflation pressures with and withoutload,
- the wheel rim and tyre sizes,
- the brands of tyre recommended by the manufacturer,
- the inflation pressure of the spare wheel,
- the paint colour code.
