2013 CHRYSLER 200 CONVERTIBLE User Guide

Page 41 of 116

CHRYSLER 200 CONVERTIBLE 2013 1.G User Guide Audio Jack Operation
• The AUX/Audio Jack provides a means to connect a portable audio device, such as an MP3player or an iPod®, to the vehicles sound system. This requires the use of a 3.5 mm ster

Page 42 of 116

CHRYSLER 200 CONVERTIBLE 2013 1.G User Guide Copying Music From USB
• The USB port on the radio face plate allows you to copy files to your hard drive. To access, liftup on the cover.
• Insert a USB device (e.g. thumb drive or memory stick),

Page 43 of 116

CHRYSLER 200 CONVERTIBLE 2013 1.G User Guide Playing Music From The HDD
• Press the “MEDIA” hard key to display the media source tabs at the top of the screen. Touchthe “HDD” soft-key tab. Touch the desired track soft-key to play or to

Page 44 of 116

CHRYSLER 200 CONVERTIBLE 2013 1.G User Guide Changing the Navigation Voice Prompt Volume
1. Program a destination.
2. While traveling on your route, touch the upper left area of the map screen where your nextturn is displayed.
3. The Navigation

Page 45 of 116

CHRYSLER 200 CONVERTIBLE 2013 1.G User Guide Entering A Destination Address
• From the main Navigation menu, touch the “Where To?” soft-key, then touch the “Address”soft-key.
• Follow the on-screen prompts to enter the address and to

Page 46 of 116

CHRYSLER 200 CONVERTIBLE 2013 1.G User Guide Following Your Route
• Your route is marked with a magenta line on the map. If you depart from the original route,your route is recalculated. A speed limit icon could appear as you travel on major r

Page 47 of 116

CHRYSLER 200 CONVERTIBLE 2013 1.G User Guide Uconnect® 730N
NOTE:
Your radio has many features that add to the comfort and convenience of you and your pas-
sengers. Some of these radio features should not be used when driving because they take

Page 48 of 116

CHRYSLER 200 CONVERTIBLE 2013 1.G User Guide Equalizer, Balance And Fade
Audio Control Menu
•
Press the “MENU” hard-key on the right side
of the radio. Then press the “Audio Control”
soft-key to get to the audio control menu.
•Use ei