![AUDI A5 CABRIOLET 2013  Owners Manual 14  Instrum ent s and  w arn ing /indic ato r  light s 
Engine cooling  system 
• 
Electromechan ica l park ing brake 
r:::;,page  18  ¢page80 
Steering  column  lock 
[I] 
Tire pressure monitor in AUDI A5 CABRIOLET 2013  Owners Manual 14  Instrum ent s and  w arn ing /indic ato r  light s 
Engine cooling  system 
• 
Electromechan ica l park ing brake 
r:::;,page  18  ¢page80 
Steering  column  lock 
[I] 
Tire pressure monitor in](/manual-img/6/57568/w960_57568-15.png)
14  Instrum ent s and  w arn ing /indic ato r  light s 
Engine cooling  system 
• 
Electromechan ica l park ing brake 
r:::;,page  18  ¢page80 
Steering  column  lock 
[I] 
Tire pressure monitor ing 
r:::;,page  18 
system./ 
¢page246 
Ignition  lock  Tire pressure monitoring  system 
r:::;,page  18 
lliliB r:::;, page  246 
USA models: 
~ 
Electronic  power  cont rol./ 
Speed warning  system  ¢page20 
r:::;,page  82 
-
Canada  models : 
• 
Malfunction  indicator  Lamp 
Speed warning  system  (MIL) 
./ 
¢ page  21 
r:::;,page82 
Ad apt ive cru ise control./ 
111 
Engine speed limitation 
r:::;,page  21 
r:::;,page  96 
• 
Engine o il level 
Yellow  indicato r lights r:::;, page  17 
Yellow  symbols  indicate  a priority  2 ma lf u nc-
-
• 
Engine oi l sensor 
tion  -Warning! 
r:::;, page  21 
• 
Power top  operation 
ri1 
Battery 
r:::;,page43  ¢page 17 
Electronic  Stabilization  Control 
-
II  II 
Tank system 
(ESC)  ./ 
¢page 21 
r:::;,  page  19 
I 
Electronic  Stabilization  Control 
• 
Warm  up engine* 
(ESC)  ./  ¢
page 208 
r:::;,page  19 
• 
Windshield  washer  fluid  level 
USA models : ¢page 21 
~ 
Anti-lock  braking  system  (ABS) 
defective  ./ 
m 
Windshield w ipers 
r:::;,  page  19  ¢
page  21 
Canada  models : 
!I 
Remote  control  key 
[I] 
Anti-lock  braking  sys tem (ABS) 
¢page 78 
defective  ./ 
--
r:::;,page 19 
!! 
Battery  in remote  control  key 
I 
USA models: ¢page33 
Safety systems  ./ 
l:J 
Defective  light  bulb  warning ' r:::;,page20 
¢page 21 
Canada  models : 
El 
Safety systems ./ 
• 
Fog lights 
¢page20  ¢
page  21 
• 
Worn  brake pads 
E 
Rear fog  light(s) * 
¢page20  ¢page 21  

Instrument s and  warnin g/indic ator  ligh ts 15 
II 
Headlight  range contro l* 
¢ page22 
Ill 
adaptive  light * 
¢page22 
-
m 
Light-/rain  sensor* 
¢page  22 
B 
Adaptive  dampers* 
¢page22 
ill 
Sport  differential* 
¢page22 
II 
Ignition  lock 
¢page23 
Ill 
Steering  column  lock 
¢page  18 
£t·fi 
Electromechanical  steering, 
dynamic  steering * 
./¢page  183 
T ransmission 
• 
- multitronic,  tiptron ic ® 
~ page92 
- S tro nic ®  ¢  page  92 
m 
Transmission 
- S tronic®  ¢ page  92 
Other  indicator  light s 
1111 
Turn signals 
ii ¢page23 
CRUISE 
-
• 
I 
• 
USA models: Cruise control 
¢page84 
C anada  models : Cruise control 
¢page84 
Adaptive  cruise control*  ¢page96 
Adaptive  cru ise control* 
¢page96 
-High  beam 
¢page53 
BRAKE /((J)) Brake  system 
T he light  illuminates  when  the  ignition  is 
swi tched on. 
It goes out  after  the  engine  has 
been started.  This  indicates  that  the  b rake 
warning  light  is functioning  p roperly. 
If th e brake warning  light  do es not  light  up 
wh en th e  eng ine  i s  cran king , th ere ma y be  a 
malfunction  in the  elect rical sy ste m . In thi s 
ca se,  cont act  your Audi dealer. 
If the brake system  wa rning/indicator  light 
tu rns on,  there is a brake system  ma lfunction. 
1111 (USA mod els)/ .  (Canada mod els ) 
Stop  v ehicle  and  ch eck brak e flu id le vel 
If  the  indicator  light  turns  on and the  mes
sage appears,  proceed as fo llows: 
.,.  Pull off  the  road . 
.,.  Stop  the  vehicle. 
.,.  Turn  off  the  engine . 
.,.  Check the  brake fluid  level  ¢page  221. 
.,.  Contact  your  nearest  authorized  repair fa-
cility  if  necessary . 
Warning!  Fault in bra ke  system.  Contact 
d eal er 
If  the  ABS indicator  light "1:l!I (USA models)/ 
(I] (Canada models),  the  ESC ind icator  light 
Jj] and the  brake system  indicator  light 
1111 (USA models)/ . (Canada models)  turn 
on and the  message appears, the  ABS, ESC 
and  braking  d istr ibut ion are not  working ¢,&.. 
Carefully  drive  to  your  author ized Audi  dealer 
immediately  to  have the  malfunct ion correct 
ed ¢,&. . 
1111 (U SA model s)/.  (Canada models) 
Par king  bra ke  system  fault!  See  own er's 
manual 
- If  the  indicator  light  and the  message ap-
pear 
when  statio nary  or after  switch ing  the 
ignition  on , 
check if  you can release the 
park ing brake . After  releasing  the  parking 
brake,  carefully  drive  to  your  author ized 
Aud i dea le r i mmediately  to  have the  ma l
function  corrected.  If  yo u cannot  release the 
park ing brake, see k professiona l assistance .  .,..  

Instruments  and  warning/indicator  lights  21 
o Malfunction  Indicator  Lamp (MIL) 
The  Malfunction  Ind icator  Lamp  (M IL) is part 
of  the  On-Board  Diagnostic  (OBD II)  system. 
The  symbol 
¢'4 lights  up when  the  ignition  is 
switched  on  and  wi ll turn  off  after  the  engine 
has  started  and  has  sett led  at  a  constant  idle 
speed.  This  ind icates  that  the  MIL is working 
properly . 
The  warning  light  illuminates when there is a 
malfunction  in the  engine  e lectronic  system . 
Contact  your  author ized  Audi dealer  and  have 
the  ma lfunction  corrected . 
An improperly  closed  fue l fi ller  cap  may  also 
cause  the  MIL light to illuminate ¢ 
page 210. 
For more  informat ion ¢ page 29. 
!?) Engine  speed limitation 
Applies to  vehicles:  wit h en gin e speed  l im it at ion 
(II Do  not  exceed  max.  engine  speed of 
XXXX rpm 
The Ill symbo l illuminates  when  there is an 
engine  control  malfunction . Th e~  indicator 
light  in the  instrument  cluster also  illumi
nates.  The engine  speed  is  limited to  the 
speed  displayed  in  the  driver  information  sys
tem.  Keep  in  mind  that the  eng ine  speed  will 
not  exceed  the  value  displayed  in the  driver  in
formation  system,  for  example  when  down
shifting. 
Drive to  your  authorized  Aud i dea ler  immedi
ately  to  have  the  malfunction  corrected. 
~ . Engine oil  level 
II Add  oil,  max  XXXX l. You may  cont.  driv. 
When  the  symbo l II and  driver  message  ap
pear,  add  the  amount  of  o il appearing  i n the 
d isplay  at  the  next  opportunity¢ 
page 217. 
If  the  symbol  illuminates,  contact  your  au
thorized  Audi  dealer  and  have  the  o il sensor  inspected. 
Until you have  this  done,  check  the 
oi l level  each  time  you  refue l just  to  be  on  the 
safe  sid e¢ 
page 217 . 
Bu Tank  system 
flm Please  refuel 
If  the  indicator  light turns  on  for  the  first 
time  and  the  message  appears,  there  are 
about  2.1  -2.4  gallons  (7  -9  liters)  of  fuel  left 
in the  tank . T ime  to  refuel ¢ 
page 209. 
Ii] Fuel tank  system  malfunction!  Contact 
dealer 
If  the  indicator  light  turns  on and  this  mes
sage  appears,  there is a  malfunction  in  the 
tank  system. 
Drive to  your authorized  Audi dealer  immed i
ate ly  to  have  the malfunction  corrected. 
If the  symbol  illuminates,  add  w indshie ld 
washe r fluid  to  the  washer system  and  also  to 
the  headlight  washer  system * ¢ 
page 226. 
~ Windshield  wipers 
£!I Windshield  wiper defective 
The re  is  a  malfunction  with the windshie ld 
wipe rs. 
Drive  to your  authorized  Audi dealer  immedi
ately  to have  the  malfunction  corrected . 
~/ }0 10 $ Defective  light  bulb  warning 
If  the 
l':;:'1 indicator  light  turns on, a  bulb  has 
failed.  The  message  indicates  the  location  of 
the  bu lb. 
- If  the 
II indicato r light  also  turns  on,  then 
a fog  light  has  failed.  The  position  of the  in
dicator  light corresponds  with  the location 
on  the  vehicle . 
- If  the 
[tD indicator  light also  turns  on, then 
a  rear  fog*  light  has failed.  The  position  of  ..,_  

22  Instruments  and  warning/indicator  lights 
the  indicator  light  corresponds  with  the  location  on the  vehicle. 
This  warning  can also  occur  if the  light  switch 
is  in an  unengaged  position  between  two  sym
bols. 
Vehicle lights:  System fault! 
If the  message  appears,  there  is a  malfunc
tion  in the  headlights  or  light  switch . 
Drive to  your authorized  Audi dealer  immedi
ately  to  have the  malfunction  corrected. 
A WARNING 
- light  bulbs  are  pressurized  and  could  ex
plode  while they  are  being  changed  caus
ing  serious  personal  injury. 
- Work with  due  care  when  handling the 
high-voltage  section  of gas  discharge 
(xenon)  lights*.  Failure to do  so could  re
sult  in death  or  serious  injury. 
{O) Tips 
Have the  bulb  replaced  or the  connection 
repaired  by your  authorized  Audi Service 
department. 
~(D Headlight  range  control 
Applies  to vehicles: with  headlight range contro l 
II Headlight  range control defective ! 
If the  symbol II illuminates,  the  dynamic 
headlight  range control  is no longer  working 
properly.  Have the  system  checked  and  re
paired  at  your  authorized  Audi dealer. 
§0 Adaptive  Light 
Applies  to vehicles: with  adaptive  light 
111 Audi adaptive  light:  defective 
If the  indicator  light turns  on and  this  mes
sage  appears,  there  is a malfunction  in  the 
adaptive  light  system. The headlights  still 
function. 
Go to  an  authorized  dealership  to  have  the  headlights  or  the control  unit  for  the  adaptive 
light  repaired . 
@? light/rain  sensor 
Applies  to  vehicles: with  light/ra in sensor 
ral Automatic  headlights/  automatic  wipers 
defective 
If  the  indicator  light turns  on  and  this mes
sage  appears,  the  light/rain sensor is not 
functioning  correctly. 
For safety  reasons  the  low beams  are  turned 
on  permanently  with  the  switch  in 
AUTO. 
However,  you can  continue  to  turn  the  lights 
on and  off  using the  light  switch . You can  still 
control  all functions  that  are  independent  of 
the  rain  sensor  through  the  windshield  wiper 
lever . 
Contact  your  authorized  Audi dealer  as  soon 
as  possible  to  have the  problem  corrected. 
g Adaptive  dampers 
Applies to vehicles: with  Audi  drive select  and adaptive 
dampers 
B Suspension: System fault! 
If the B symbol  in the  display  comes  on,  there 
is  a malfunction  in the  adaptive  dampers . 
Please  go to  an  authorized  Audi dealer  or  oth
er  qualified  workshop  to  have the  malfunction 
repaired. 
!-: Sport  differential 
Applies  to vehicles: with  Audi drive  select  and sport  dif
ferential 
Sport  differential:  System fault! 
There  is a malfunction  with  the  sport  differen
tial. 
Drive to  your  authorized  Audi dealer  immedi
ately  to  have the  malfunction  corrected. 
Sport differential:  Overheating 
The  transmission  temperature has increased 
significantly  due  to  the sporty  driving  manner. 
Drive  in a less  sporty  manner  until  the  tem
perature  returns  to  the  normal  range and  the 
indicator  light switches  of. 
ll- 

Locking and  unlocking  with  convenience 
key 
Applies  to  vehicles:  with  convenience key 
The doors  and  the  rear lid can be unlocked 
and  locked  without  operating  the  master  key . 
Fig . 21 Doo r handle : lock ing  t he ve hicle 
Unlocking  vehicle 
.. Take  hold  of  the  door  hand le . The  door  is 
unlocked  automatically. 
..  Pull  the  handle  to  open  the  door . 
Locking vehicle 
.. Move the  selector  lever to the  P position , 
otherwise  the  veh icle  cannot  be locked . 
..  To  lock  the vehicle,  close  the  door  and  touch 
the  sensor  in the  door  hand le 
once Q fig.  21 
Q A in Gen eral description  on page  31. Do 
not  reach  inside  the  door  handle. 
The  vehicle  can  be  locked  and  unlocked  at  any 
door.  The  remote  control  key cannot  be  more 
than  1.5  m  away  from  the  door  hand le.  It 
makes  no  difference  whether  the  master  key 
is in your jacke t pocket  or  in your  brie f case. 
If  you  grip  the  door  handle  while  locking,  this 
can  adversely  affect  the  locking  function. 
It is not  possible  to  re-open  the  door for  a 
brief  period  d irect ly after  closing  it.  This  al
lows  you  to  ens ure  that  the  doors  are  properly 
locked. 
It depends  on  the  settings  in the  radio  or 
MMI*  whether  the  entire  veh icle  is  unlocked 
or  one  of  the  doors 
Q page  36 . 
Opening  and  closing  35 
A WARNING 
Read  and  follow  all WARNINGS Q .&. in 
General description  on page  31 . 
(D Tips 
If your  vehicle  has  been  standing  for an ex
tended  per iod,  please  note  the  following: 
- The  proximity  sensors  are  deactivated af-
ter  a few  days  to  save  power . You then 
have  to  pull  on  the  door  handle  once  to 
unlock  the  vehicle  and  a  second  t ime  to 
open  the vehicle. 
- To prevent  the  battery  from  being  d is
charged  and  to  preserve your  vehicle's 
ability  to  start  for  as long  as  possible, 
the  energy  management  system  gradu
ally  switches  off unnecessary  conven
ience  functions. 
It is possible  that  you 
w ill  not  be  able to  unlock  your  vehicle  us
ing  these  convenience  functions. 
- For  Declaration  of  Compliance to  United 
States  FCC and  Industry  Canada  regula 
tions 
Q page 2 72. 
Locking and  unlocking  the  vehicle  from 
inside 
Fig. 22 D rive r's doo r: pow er locking  sw it c h 
..  Press  the  button@ to  lock the  vehicle Q _&. 
.. Press  the  button  @to  unlock  the  vehicle 
¢fig.22 . 
If you  lock  the  vehicle  using the power  locking 
switch,  please  note  the  fo llowing: 
- If  a  door  is open , the  vehicle  cannot  be 
locked  using  the  power locking system 
switch.  

52  Clear vis ion 
Clear  vision 
Lights 
Switching  the  lights  on  and  off 
Fig . 54 Instr ument  pane l:  headlight  con trol  switch 
Light switch  -~ -
Turn the  switch c:> fig . 54  to  the  correspond ing 
position . When  the  lights  are switched  on, the 
,o o~ symbo l tu rns on. 
0  -The lights  are off  or the  dayt ime run ning 
lights  are on: 
- USA models: The daytime  running  lights  are 
activated  when the  light  sw itch 
c:> fig . 54  is 
i n the 
O position  or the AUTO position  (o nly 
in  dayl ight  conditions) . The daytime  running 
lights  function  can be turned  on and off  in 
the  radio  or  M MI*  menu 
Exterior  lighting 
c:> page 53 , c:> ,&.. 
-Canada model s: The daytime  runn ing lig hts 
are activated  when  the  light  sw itch 
c:> fig . 54 
is  in the 
O p osition, :o o; position  or the AUTO 
pos it ion  (on ly in  daylight  cond itions) . The 
dayt ime running  lights  function  cannot  be 
tu rned off 
c:> &. . 
AUTO*  -Au toma tic h eadlights  switch  on and 
off  depending  on  b rightness,  fo r example  in 
tw ilight,  during  rain  or  in t unnels 
c:> &. . 
:o o;  -Side mar ker lights 
io  -Low beam  headlights 
Fog lights /rear fog  light( s)* 
Press the  appropriate  b utton c:> fig. 54: 
}0  -Fog  lights 
0$  -Rear fog  light(s) 
adaptive  light* 
When  switched  on, adap tive  ligh t  ad apts to 
curves in the  road  depending  on the  vehicle 
speed and the  steering  ang le . This provides 
b etter  l ighting  t hro ugh the  curve . The system 
operates  at  speeds between  app roximate ly 
6 mph  (10  km/h)  and  68  mph  (110  km/h). 
Static  cor nering  light* (vehicles with  adaptive 
light)  - the  cornering  light  switches  on at 
speeds  up to  approximately  25  mph  (40  km/ 
h) when  a certain  steering  wheel  angle  is 
reached or when  a turn  sig na l is activated.  The 
area to  the  s ide of  the  vehicle  is illumi nated 
be tte r when  tur ning . 
The adaptive  light  and the  co rnering  light  only 
funct ion when  the  switch  is in the  AU TO posi
t ion  (automatic  headlights*) . 
A WARNING 
--
- Daytime  r unning  lights  and  automatic 
headlights*  are only  inte nded to  assist 
the  dr iver . Th ey  do  not re lieve  the driver 
o f  his  re sp onsibili ty to  check t he  head 
lights  and  to t urn  them  on manua lly ac 
cordin g to  the  c urrent  light  and visibility 
conditions . For examp le, fog  cannot  be 
detected  by the  light  sensors *. So a lways 
sw itch  on t he headlights 
io under  these 
wea ther conditions  and when  driving  in 
the  dark. 
- Cras hes can happen  whe n you cannot  see 
the  road  ahead and when yo u cannot  be 
see n by other  moto ris ts. Always tu rn on 
the  head lig hts  so that  yo u can se e ahead 
and  so  th at  others  can see your  car fr om 
the  b ack. 
- Pl ease obey all  laws w he n  usi ng the 
lighting  sys tems  descr ibed  here. 
(D Note 
The rear fog  lights * should  o nly be  tur ned 
o n  in  acco rdanc e with  t raff ic regu lation,  as 
the  lights  are bright  for  following  traffic.  ..,  

@ Tips 
-The light  sensor * for  headl ight  control  is 
l ocated  in the  rear view  m irror  mount. 
You should  therefore  not  apply  any st ick
ers to  the  windsh ield  in this  area  in order 
to  prevent  malfunctions  or failures . 
- Some exterior  lighting  functions  can be 
ad justed 
¢ page  53. 
-When  yo u remove you r key from  the  igni
tion  w hile the  vehicle's  lights  are turned 
on,  a buzzer sounds  as long  as the  driv
er's  door  is open . 
- In  cool or  damp  weather,  t he ins ide of 
the  headlights,  turn  signa ls and tail 
li ghts  can fog  ove r due to  the  tem pera 
ture  diffe ren ce betwe en  the inside  and 
outside.  They will  clear shor tly after 
swi tching t hem on.  This d oes  not  aff ect 
the  service life  of  the ligh ting. 
- In  the even t of  a  ligh t sensor  malfunc
tion,  the  drive r is no tifie d in  the  inst ru 
ment  cluster  disp lay ~ 
page  2 2. 
Turn signals  and  high  beam  lever 
The lever operates  the  turn  signal s,  the  high 
b eams  and  th e headlight  flash er. 
F ig.  55 Turn  sig na l an d high  beam  leve r 
Turn  signals ¢i ¢ 
Th e turn  s ignals  activate  when you  move the 
l ever  into  a turn  s ignal  position  when  the  ign i
tion  i s sw itched  on. 
(D -right  turn  signal 
@ -Left  turn  signa l 
T he turn  s ignal  b links three  times  if  you just 
tap  the  lever . 
Clear vision 5 3 
High  beams and  headlight  flasher @:D 
Move the  lever to  the  corresponding  posit io n: 
@ -high  beams on 
@-high  beams off  or  headlight  flasher 
T he ind icator  light 
II in the  instr ument  clus 
ter  turns  on . 
Notes on these  features 
-The turn signals on ly wor k w it h t he ignition 
t urned  on. The  indica tor  l igh ts 
11 or II in 
the  instrument  cluste r also  blink . 
- Aft er you  have tu rned  a corner,  the turn  s ig
na l swi tches off  au tom atically . 
- The 
high beam wo rks only  when  the  head
lights  a re on. The indicator  Ligh t.  in the 
i nstrumen t clus ter  illuminates  when  the 
high  beams are on . 
- The 
headligh t flasher works  on ly as  long  as 
you  ho ld the  lev er  -even  if the re are no 
lights  switched  o n. The ind icator  light 
Ill i n 
the  inst rument  cluster  illuminates  when you 
use the  headlight  flasher . 
&_ WARNING 
Do not  use the  high  beam or  head light 
flasher  if  you  kn ow  that  these  could  b lind 
oncom ing traffic. 
Adjusting  exterior  lighting 
The functions  are selec ted in the  radio or 
MM!* . 
..  Select : I CAR! function  b utton > Exter io r 
light ing . Or 
.. Select: I CAR I func tion  button > Car sys 
tems * 
control  button > Vehicle  settings > 
Exterior  Lighting . 
Coming  home  (light  when  leaving  car )*, 
Leaving home  (light  when  unlocking  car)* 
T he coming  home function  illumi nates the 
area around  the  vehicle when  the  ignition  is 
switched  off  and the  dr iver's door  is open ed. 
Depend ing o n ve hicl e equ ipment,  t he function 
can be switched  on  and off  or  the  length  of 
time  the  lig hts  remain  on*  can  be ad justed . .._  

-If swallowed  and  person  is conscious, 
rinse  mouth  with  water  for  at  least  15 
minutes . Do not  induce vomiting  unless 
instructed  to  do so  by medical  professio
nal.  Get medical  attention  immediately. 
(D Note 
Liquid electrolyte  leaking  from  broken  mir
ror  glass  will damage  any  plastic  surfaces 
it comes  in contact  with . Clean up spilled 
electrolyte  immediately  with  clean  water 
and  a sponge. 
@ Tips 
- Switching  off the  dimming  function  of 
the  inside  rear  view mirror  also  deacti
vates  the  automatic  dimm ing function  of 
the  exterior  mirrors . 
-Automatic  dimming  for  the  mirror  only 
operates  properly  if the  light  striking  the 
inside  mirror  is  not hindered  by other  ob
jects. 
- The automatic  dimming  mirrors  do  not 
dim when  the  interior  lighting is turned 
on  or  the reverse  gear  is selected . 
Sun visors 
._[ _  __,! 
Fig.  62 Driver's s ide:  s un visor 
The sun  visors  for  the  driver  and  passenger 
can  be  pulled  out  of their  brackets  in the  cen
ter  of the  vehicle  and  turned  towards  the 
doors 
(D . 
The mirror  light  switches  on when  the  cover 
over the  vanity  mirror @opens . 
Clear vision 5 7 
Wiper  and  washer 
system 
Switching  the  windshield  wipers  on 
Fig.  63 Win dshi eld  w ipe r leve r 
Move the  windshield  wiper  lever to  the  corre
sponding  position: 
@-Windshield  wiper  off 
CD-Interval  mode . To extend/shorten  the 
wiper  intervals,  move the  switch  @to the 
left/right.  In  vehicles  with  a rain  sensor*  the 
wipers  turn  on  in the  rain  once  the  vehicle 
speed  exceeds  approximately  2  mph  (4  km/h) . 
The  higher  the  sensitivity  of the  rain  sensor*  is 
set  (switch @to  the  right),  the  earlier  the 
windshield  wipers  react  to moisture  on the 
windshield.  In some  models,  you  can switch 
rain  sensor  mode  off and  switch  intermittent 
mode  on  in the  MMI* . Select: 
!CAR I function 
button 
> Car systems* control  button > Driver 
assist 
> Rain  sensor. In  intermittent  mode, 
you can  adjust  the  interval  time  using  the@ 
switch. 
@ -Slow wiping 
® -Fast  wiping 
©-Single  wipe 
® -Clean the  windshield.  To eliminate  water 
droplets,  the  windshield  wiper  performs  one 
afterwipe  operation  after  several  seconds 
while  driving . You can  switch  this  function  off 
by moving the  lever  to  position ® within  10 
seconds  of the  afterwipe  operation.  The  after
wipe function  is  reactivated  the next time  the 
ignition  is switched  on. 
...