2013 Alfa Romeo Giulietta technical specifications

FUEL SUPPLYVersionsFuel supply
1.4 Turbo MultiAirPhased sequential electronic injection with knock control and variable
intake valve actuation
1.4 Turbo Petrol-1750 Turbo PetrolElectronically controlled phased sequential multipoint electronic
injection with turbo and intercooler
1.6 JTD
M- 2.0 JTD
M
Electronically controlled Common Rail MultiJet direct injection with
turbo and intercooler
Modifications or repairs to the fuel supply system that are not carried out correctly or do not take the system's technical
specifications into account can cause malfunctions leading to the risk of fire.
210GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

TRANSMISSIONVersions Gearbox Clutch Drive
1.4 Turbo Petrol
Six forward speed plus reverse
with synchronisers for the
engagement of the forward
speedsSelf-adjusting pedal without idle
strokeFront 1.4 Turbo MultiAir
1750 Turbo Petrol
1.6 JTD
M
2.0 JTD
M
211GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX

BRAKESVersions Front brakes Rear brakes Parking brake
1.4 Turbo Petrol
Self-ventilated discs DiscControlled by hand lever, acting
on the rear brakes 1.4 Turbo MultiAir
1750 Turbo Petrol
1.6 JTD
M
2.0 JTD
M
IMPORTANT Water, ice and salt spread on the roads may deposit on the brake disks reducing braking efficiency the first time the brakes are
applied.
212GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

SUSPENSIONVersions Front Rear
1.4 Turbo Petrol
MacPherson independent wheel with anti-roll bar Multi-link structure system 1.4 Turbo MultiAir
1750 Turbo Petrol
1.6 JTD
M
2.0 JTD
M
213GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX

STEERING SYSTEMVersions Turning circle (kerb to kerb) Type
1.4 Turbo Petrol
10.55 mRack and pinion with electro-mechanical power
steering (Dual Pinion architecture) 1.4 Turbo MultiAir
1750 Turbo Petrol
1.6 JTD
M
2.0 JTD
M
214GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

WHEELSRIMS AND TYRESPressed steel or alloy rims. Tubeless radial carcass tyres. The vehicle
registration document also lists all type-approved tyres.
IMPORTANT If there are any discrepancies between the Owner
handbook and the registration document, take the information from the
latter.
For safe driving, the car must be fitted with tyres of the same make and
type on all wheels.
IMPORTANT Do not use tubes with tubeless tires.SPACE-SAVER WHEELPressed steel rim. Tubeless tyre.READING THE TYRE CODEExample fig. 180: 205/55 R 16 91V205
Rated width (S, distance in mm between sidewalls)
55
Height/width ratio (H/S) as a percentage
RRadial tyre16
Rim diameter in inches (Ø)
91
Load rating (capacity)
VMaximum speed indexMaximum speed index
Qup to 160 km/hRup to 170 km/hSup to 180 km/hTup to 190 km/hUup to 200 km/hHup to 210 km/hVup to 240 km/hW
up to 270 km/h
Yup to 300 km/h
Maximum speed index for snow tyresQM + S
up to 160 km/h
TM + S
up to 190 km/h
HM + S
up to 210 km/h
fig. 180
A0K0043
215GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX

Load rating (capacity)
60= 250 kg76= 400 kg
61= 257 kg77= 412 kg
62= 265 kg78= 425 kg
63= 272 kg79= 437 kg
64= 280 kg80= 450 kg
65= 290 kg81= 462 kg
66= 300 kg82= 475 kg
67= 307 kg83= 487 kg
68= 315 kg84= 500 kg
69= 325 kg85= 515 kg
70= 335 kg86= 530 kg
71= 345 kg87= 545 kg
72= 355 kg88= 560 kg
73= 365 kg89= 580 kg
74= 375 kg90= 600 kg
75= 387 kg91= 615 kg
CORRECT READING OF THE RIM CODEExample fig. 180:7Jx16H2ET417rim diameter in inches (1).Jrim drop centre outline (side projection where the tyre bead rests)
(2).16
rim fitting diameter in inches (corresponds to diameter of the tyre
to be mounted) (3 = Ø).
H2
shape and number of humps (circumference measurement which
keeps the bead of tubeless tyres in position on the rim).
ET 41
wheel camber (distance between the disc/rim support plane
and the wheel rim centre line).
216GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

RIM PROTECTOR TYRES
DO NOT fit wheel hub caps when using integral hub
caps fixed (with springs) to the steel rim and after sale
tyres provided with Rim Protector (fig. 181). Use of
unsuitable tyres and wheel caps may cause sudden loss of tyre
pressure.
fig. 181
A0K0159
217GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX