Page 66 of 252
65
Data ResetReset Factory Default SettingsHINFO/PHONE button
Setup
Other
Reset Factory Default
Reset all the settings on the Setup screens
and rearview camera brightness settings
to their factory default.
Rotate
i
to select
Yes
. Press
u
to
reset the settings.
1Reset Factory Default SettingsThe following settings are reset:•Brightness, Contrast,
Black Level, Volume,
Interface Dial Feedback
, Brightness (rearview
camera)•Basic Settings: Units, Voice Recognition Tutor•Routing & Guidance: Rer
outing, Unverified
Area Routing, Traf
fic Rerouting,
Edit Waypoint
Search Area, Guidance Mode, Street Name Guidance, Guidance Screen Interruption•Clock Adjustment: Auto Daylight, Auto Time Zone, Time•Vehicle: Off-road Tracking•Color: Map Color, Menu ColorMessages are
not deleted.
AcuraLink/Messages settings are not reset to their factory default settings.
QRG
System Setup
Page 67 of 252
66
Data Reset
Clear Personal Data
Clear Personal DataHINFO/PHONE button
Setup
Other
Clear Personal Data
Delete uploaded data, calendar entries, addr
ess books, or stored destinations, or
reset other settings to their factory defaults.
1.Rotate
i
to select an item.
Repeat the procedure to delete other items.
Items to be deleted are indicated with a trash icon.
2.Move
r to select
OK
.
3.Rotate
i
to select
Yes
. Press
u
to delete the data.
1Clear Personal DataThe following item
s can be deleted:
•Address book for Driver 1 and 2•Home address 1 and 2•Previous destination•Calendar entries•Avoid areas•Music on HDD•Cellular phone inform
ation (phonebook, dial/
receive history,
speed dial, registered phone,
and pass key)•WallpapersWhen the Address Book is deleted, all contents (except the Categor
ies) are deleted.
When Cellular Phone Information is deleted, the imported phonebooks, speed dials, and voice tags are deleted. If you have PIN-protecte
d your address books or
home addresses, enter your PIN when prompted. Move
r to select
OK
. PIN numbers are optional.
2PIN Numbers
P. 42
Trash icon
QRG
System Setup
Press
u
.
Page 136 of 252
135
Audio System
Auxiliary Input Jack
Auxiliary Input JackUse the jack in the console compartment
to connect standa
rd audio devices.
1.Open the AUX cover.2.Connect a standard audio device to the input jack using a 1/8 inch (3.5 mm) stereo miniplug.
The audio system automatically switches to the AUX mode.
Audio System Theft ProtectionThe audio system is disabled when it is
disconnected from the power source (e.g.,
when the battery is disc
onnected or goes dead.)
■Entering the Audio Security Code“ENTER CODE” appears on the displa
y when the power is reconnected.
1.Turn on the audio system.2.Enter the audio security code using the pr
eset buttons. If you enter an incorrect
digit, continue to the last digit, then
try again. If you do not enter the code
correctly after 10 tries, you need to vi
sit a dealer to have the system reset.
1Auxiliary Input JackTo switch the mode, press any of the other audio mode buttons. You can return to the AUX mode by pressing the AUX button. You cannot use the auxili
ary input jack if you
replace the audio system. 1Audio System Theft ProtectionFind the audio system’s security code and serial number on the radio code card.Do not store the card in your vehicle. If you lose the radio code card, you must obtain the information from a dealer.
QRG
Audio
Page 137 of 252
136Audio
Playing FM/AM RadioSelecting FM/AM Mode1.Press the FM/AM button.
Press the FM/AM button again, if necessary, to select the frequency band (AM, FM1, FM2).
2.Select a station using the buttons (P
reset, SCAN) or bars (SKIP, TUNE).
On the FM bands, you can also use
the CATEGORY bar and TITLE button to
select a station provided by the Radio Data System (RDS).
The band and frequency are displayed on the display.
Audio Screen ControlHAUDIO button (in FM/AM mode)Control the audio system through the navigation screen.
1.Move
e to select a frequency band
(AM
, FM1
, or
FM2
).
2.Rotate
i
to select a preset
station. Press
u
.
Press and hold
u
until a beep
sounds to store the current station in a preset button.
Move
r to select
AUDIO
MENU
.
2Audio Menu
P. 137
1Playing FM/AM Radiod
“Display audio screen”
You can control the radio using voice control commands. 2Radio Commands
P. 239
A visual guide helps
you operate the audio
system. 2System Controls
P. 4
2Basic Operation
P. 6
The ST indicator comes on the display for stereo FM broadcasts. Stereo re
production in AM is not
available. The radio can receive the complete AM and FM bands: AM band: 530 to 1710 kHz FM band: 87.7 to 107.9 MHz You can store six AM stati
ons and 12 FM stations
in the preset buttons. FM1 and FM2 let you store six stations each.
Stereo indicator
Frequency band
Preset stations
QRG
Page 138 of 252
137
Playing FM/AM Radio
Audio Menu
Audio MenuHAUDIO button (in FM/AM mode)
AUDIO MENU
Rotate
i
to select an item. Press
u
.
The following items are available: •Sound Setup
: Displays the sound preferences screen.
2Adjusting the Sound
P. 170
•Read Radio Text
: Displays the text information
broadcast by the current RDS
station. 2Radio Text Display
P. 139
•RDS Search
: Searches for programs by RDS category.
2Searching for Programs by RDS Category
P. 138
•Scan
: Scans for stations with a strong signal in the current band and plays a 10-
second sample. Select
Scan
again to stop scanning and play the current selection.
•A.SEL (Auto Select)
: When set to
ON
, scans and automatically stores up to six
AM stations and 12 FM stations with a strong signal in the preset buttons.•Tune
: Tunes the radio to the frequency you select. Rotate
i
to select a
frequency.
1Audio MenuThe A.SEL indicator comes on the display when A.SEL
is ON
. If you do not like the stations Auto
Select has stored, you can change the frequencies stored in
the preset buttons
manually. Set
A.SEL
to
OFF
to restore the
previous preset button settings.
QRG
Audio
Page 141 of 252
140Audio
Playing XM® RadioSelecting XM Mode1.Press the XM button.
Press the XM button again, if necessary, to select the band (XM1, XM2).
2.Select a channel using the buttons (Preset, SCAN, TITLE) and the bars (SKIP,
The band and channel are displayed on the display.
Audio Screen ControlHAUDIO button (in XM mode)Control the audio system through the navigation screen.
1.Move
e to select the channel band
(XM1
, XM2
).
2.Rotate
i
to select a preset
channel. Press
u
.
Press and hold
u
until a beep
sounds to store the current channel in a preset button.
Move
r to select
AUDIO
MENU
.
2Audio Menu
P. 141
1Playing XM® Radiod
“Display audio screen”
You can control the radio using voice control commands. 2Radio Commands
P. 239
A visual guide helps
you operate the audio
system. 2System Controls
P. 4
2Basic Operation
P. 6
In the channel mode, all available channels are selectable. In the categor
y mode, you can select
a channel within a category
(Jazz, Rock, Classical,
etc.). There may be instance
s when XM® Radio does
not broadcast all the data
fields (artist name,
title). This does not indica
te a problem with your
audio system.You can store 12 XM stat
ions in the preset
buttons. XM1 and XM2 let
you store six stations
each.XM® Radio display messag
es will be displayed
on the audio screen. 2XM® Radio Display Messages
P. 144
Channel band
Preset channels
QRG
TUNE, CATEGORY).
Page 146 of 252
145
Playing a DiscSelecting Disc Mode1.Press the DISC/HDD button to play a CD or other disc.2.Insert a disc into the disc slot.
The disc automatically begins playing.
3.Select a track using the buttons (TITLE, SCAN) and the bars (SKIP,
TUNE, CATEGORY).
The track number and elapsed time ar
e displayed on the display. Title
information for audio CDs is displayed if
found in the Gracenote® Album Info
(Gracenote® Media Database) stored on the
built-in hard disc drive (HDD). Text
information stored on MP3/WMA/
AAC discs is also displayed.
Audio Screen ControlHAUDIO button (in DISC mode)Control the audio system through the navigation screen.
Rotate
i
to select a track. Press
u
.
Move
e to select
FOLDER LIST
to
display the list of folders on
MP3/
WMA/AAC discs having a
folder
structure. 2Playing MP3/WMA/AAC Discs P. 147Move
r to select
AUDIO MENU
to display the Audio Menu. 2Audio Menu
P. 146
1Recording a Noted
“Display audio screen”
You can control the disc using voice control commands. 2Disc Commands
P. 240
A visual guide helps
you operate the audio
system. 2System Controls
P. 4
2Basic Operation
P. 6
Do not use discs with a
dhesive labels. The label
can cause the disc to jam in the unit. WMA tracks protected by digital rights management (DRM) cannot be played.
The
audio system displays UNSUPPORTED, then skips to the next track. If there is a problem, you may see an error message on the display. 2Error Messages
P. 217
If you eject the disc but
do not remove it from
the slot, the system reloads the disc automatically after severa
l seconds.
Pausing a DiscPress the preset 1 button. To resume playing the disc, press the button again.
Disc mode
Track list
QRG
Audio
Page 173 of 252
172
Audio Remote Controls
Steering Wheel Controls
Audio
FM/AM, XM •Press the
N
(Channel) button to change to the next preset station (channel).
•Press the
B
(Channel) button to go to the previous preset station (channel).
•FM/AM: Press and hold for one second to scan for a station with a strong signal.•XM: Press and hold for one second to go to the next/previous channel in the current category.DISC, HDD, iPod®, USB,
Bluetooth
® Audio (on some phones)
•Press the
N
button to skip to the end of the current track.
•Press the
B
button to skip to the beginning of the current track. Press the
B
button again to go to the beginning of the previous track.•Press and hold to skip forward/backward
to the first track of the next folder.
■CH (Channel) Button
QRG
