20System Setup
Start-upThe navigation system starts automatically when you set the power mode to 
ACCESSORY or ON. At start-up, the following Confirmation screen is displayed.
1.Move y to select CHANGE 
LANGUAGE.
 X
If you do not need to change 
the system language, proceed to 
step 3.
2.Rotate i to change the system 
language. Press u.
3.Press u to select OK.
 X
Your current position is 
displayed on the map screen.
 X
If you have set any calendar 
event reminders, they are 
displayed. Proceed to step 4.
1Start-up
If the navigation system loses power at any time, 
you may need to press and hold the VOL 9 
(Volume/Power) button for more than two 
seconds, or you may be prompted for the five-
digit security code. 
2System Initialisation P. 206
You can change the system language at any 
time. 
2Language P. 31
“OK” on the Confirmation screen cannot be 
selected by using a voice command. If you do not 
press u within 30 seconds, the screen goes 
blank (or displays your wallpaper screen and you 
cannot use voice commands). Press any 
navigation or voice control button to continue.
2Wallpapers Setting P. 32