2013 Acura ILX navigation

117Navigation
Changing Your DestinationThere are several methods you can use to change the route destination.Find Nearest PlaceHENTER button (on map)
X Find Nearest…
Search for the nearest place/landmark on the map screen and set it as your
destination.
1.Rotate i to select Find
Nearest…. Press u.
2.Rotate i to select a category
type. Press u.
3.Rotate i to select a place. Press
u.
4.Rotate i to set the place as a
destination or add to the
destination list. Press u.
X
The system calculates the route. 2Calculating the Route
P. 87
1Find Nearest Place
d “Find Nearest…” (on map screen)
The Find Nearest voice command is the fastest
method of specifying a place/landmark as your
destination. Many kinds of places can be found.
2Find Place Commands P. 219

118
XX
Changing Your Destination
XSelecting a Destination on the Map
Navigation
Selecting a Destination on the MapSelect a new destination when en route by selecting a location on the map.
1.Scroll the map to position the
cursor over your desired
destination, adjusting the map
scale as necessary. Press u.
X
If the address displayed is not
the desired location, press the
CANCEL button and repeat the
procedure.
2.Rotate i to select OK or Set as
Dest. (depending on the screen
displayed). Press u.
2Calculating the Route
P. 87
1Selecting a Destination on the Map
If there is more than one icon or street under the
map cursor, you are prompted to select the item
from a list.•Rotate i to select an item. Press u.•If you select Map Icon, rotate i to select a
place and press u.

119
XX
Changing Your Destination
XEntering a New Destination
Navigation
3.Rotate i to select an option.
Press u.X
The route is automatically
recalculated and displayed on
the map screen.
The following options are available:
•New Dest.: Sets the location as your new destination.
•Waypoint: Sets the location as a new waypoint.
Entering a New DestinationHDEST/ROUTE button (when en route)
X Dest. MENU 1 or Dest. MENU 2
Enter a new destination using the Destination Menu screen even when you are en
route.
1.Rotate i to select a method to
enter a new destination.
2Entering a Destination
P. 64
X
After entering a new
destination, the address is
displayed on the Calculate
Route screen.
2.Rotate i to select OK. Press u.
1Entering a New Destination
d “Display Destination”, d “Display
Navigation”
Continued

120
XX
Changing Your Destination
XEntering a New Destination
Navigation
3.Rotate i to select an option.
Press u.X
The route is automatically
recalculated and displayed on
the map screen.
The following options are available:
•New Dest.: Sets the location as your new destination.
•Waypoint: Sets the location as a new waypoint.

121Navigation
Resuming Your TripStop your vehicle en route (e.g., to rest, stop for gas, etc.), and then continue on
your route.
If you did not complete your route, the Continue Trip screen is displayed when you
restart your vehicle.
Rotate i to select OK. Press u.
XYou can continue on the same
route.
•Route Pref.: Changes the route preferences (calculating method).
2Changing the Route Preference
P. 88
•View Routes: Displays three different routes.
2Viewing the Routes
P. 88
•DESTINATION MAP: Move r to select DESTINATION MAP to display a map of
the destination.
2Calculating the Route on the Destination Map
P. 89
1Resuming Your Trip
The Continue Trip screen has the same options
as when you calculate a route.
2Calculating the Route P. 87
To cancel your destination, press the CANCEL
button.
Add to Address Book
You can add the destination address to the
address book.
2Adding an Address Book Entry P. 37
Add to Dest. List
You can add the address to the Destination List.
2Editing the Destination List P. 116
Call
You can place a phone call to the destination
phone number.
2Bluetooth® HandsFreeLink® P. 162

125
XX
Audio System
XAudio System Theft Protection
Audio
Audio System Theft ProtectionThe system is disabled when it is disconnected from the power source, such as when
the battery is disconnected or goes dead.
■Reactivating the System
1.Set the power mode to ON, and turn on the system.X
If you set the power mode to ACCESSORY, you will be requested to enter the
security code. See step 3.
2.Press and hold the VOL 9 (Volume/Power) button again for more than two
seconds.
X
The system is reactivated when the system’s control unit recognizes that the
system is in your vehicle.
X
If the control unit fails to recognize, “ENTER CODE” appears on the navigation
screen.
3.Enter the security code.
X
If you do not enter the code correctly after 10 tries, leave the system for one
hour before trying again, or visit a dealer to have the system reset.
1Audio System Theft Protection
Find the audio system’s security code and serial
number label in your Owner’s Manual kit.
Do not store the label in your vehicle. If you lose
the label, you must first retrieve the serial
number, and then obtain the code from a dealer.

126Audio
Playing FM/AM RadioSelecting FM/AM Mode1.Press the FM/AM button.X
Press the FM/AM button again, if necessary, to select the frequency band (AM,
FM1, FM2).
2.Select a station using the Preset buttons and the bars (SKIP, TUNE, SCAN/A.SEL).
X
On the FM bands, you can also use the CATEGORY bar and TITLE button to
select a station provided by the Radio Data System (RDS).
X
The band and frequency are displayed on the display.
Audio Screen ControlHAUDIO button (in FM/AM mode)
Control the audio system through the navigation screen.
1.Move e to select a frequency band
(AM, FM1, or FM2).
2.Rotate i to select a preset
station. Press u.
X
Press and hold u until a beep
sounds to store the current
station in a preset button.
X
Move r to select AUDIO
MENU. 2Audio Menu
P. 127
1Playing FM/AM Radio
d “Display audio screen”
You can control the radio using voice
commands.
2Radio Commands P. 221
A visual guide helps you operate the audio
system.
2System Controls P. 4
2Basic Operation P. 6
The ST indicator comes on the display for stereo
FM broadcasts. Stereo reproduction in AM is not
available.
The radio can receive the complete AM and FM
bands:
AM band: 530 to 1710 kHz
FM band: 87.7 to 107.9 MHz
You can store six AM stations and 12 FM stations
in the preset buttons. FM1 and FM2 let you store
six stations each.
Stereo indicatorFrequency band
Preset stations

130Audio
Playing XM® RadioSelecting XM Mode1.Press the XM button.X
Press the XM button again, if necessary, to select the channel band (XM1,
XM2).
2.Select a channel using the Preset buttons and the bars (SKIP, TUNE, CATEGORY,
SCAN/A.SEL).
X
The band and channel are displayed.
Audio Screen ControlHAUDIO button (in XM mode)
Control the audio system through the navigation screen.
1.Move e to select the channel band
(XM1, XM2).
2.Rotate i to select a preset
channel. Press u.
X
Press and hold u until a beep
sounds to store the current
channel in a preset button.
X
Move r to select AUDIO
MENU. 2Audio Menu
P. 131
1Playing XM® Radio
d “Display audio screen”
You can control the radio using voice
commands.
2Radio Commands P. 221
A visual guide helps you operate the audio
system.
2System Controls P. 4
2Basic Operation P. 6
In the channel mode, all available channels are
selectable. In the category mode, you can select
a channel within a category (Jazz, Rock, Classical,
etc.).
There may be instances when XM® Radio does
not broadcast all the data fields (artist name,
title). This does not indicate a problem with your
audio system.
You can store 12 XM stations in the preset
buttons. XM1 and XM2 let you store six stations
each.
XM® Radio display messages will be displayed
on the audio screen.
2XM® Radio Display Messages P. 132
Channel band
Preset channels