2012 TOYOTA xD set clock

8
8

Basic Operation
Your audio system works when the
ignition switch is in the “ACC” or
“ON” position.
NOTICE
To avoid draining the battery,
do not leave the car audio on
longer than necessary when the
engine is not running.
1 POWERPress to turn the unit on or off.
2 ROTARY ENCODER/VOLUMETurn the ROTARY ENCODER to raise/lower the volume levels (total volume step is 64). ROTARY ENCODER operation varies depend-ing on the audio source or Menu. (Refer to page 7.)To select the following set-ting options, press the ROTARY ENCODER to switch to the AUDIO MENU. Turn the ROTARY ENCODER clockwise or counterclockwise to select an item and press the ROTARY ENCODER. You can select SET TINGS in TUNER mode or iPod mode.
SSP  AUDIO CTRL  SETTINGS 
BLUETOOTH  PHONE

10
10

NOTICE
The ASR function can only be
selected when playing MP3/
WMA /A AC from CD and iPod,
USB portable audio player/
USB memory/Bluetooth-
Audio.
The ASR function does not
support external compressed
audio media.
Switching of ASR settings is
disabled in Bluetooth-Audio
mode when no Bluetooth
device is connected or when
settings cannot be switched.
BASS function and TREBLE
function values can be set for
each of the modes (AM, FM,
CD/MP3/ WMA /A AC, iPod/USB
portable audio player/USB
memory, XM Satellite Radio,
Bluetooth audio player, AUX).
When you switch modes, the
settings change to the BASS
and TREBLE values set for the
selected mode.
The ASL function is only
effective when the vehicle is
moving.
•
•
•
•
•
SETTINGS
You can select this item in TUNER mode or iPod mode.If you select SET TINGS, you can set the following items.• HD ON/OFF (in TUNER mode)
• IPOD DIRECT (in iPod mode)
• AUDIO BOOK (in iPod mode)
To select a setting option in iPod mode, turn the ROTARY ENCODER clockwise or counterclockwise and press the ROTARY ENCODER.
IPOD DIRECT  AUDIO BOOK
HD ON/OFF:If you set HD ON/OFF to ON, digital broadcasting is preferentially selected. During SCAN or SEEK operations, the tuner searches for all digital and analog broadcasting stations.
If you set HD ON/OFF to OFF, only analog broadcasting is selected. During SCAN or SEEK operations, the tuner searches only for analog broadcasting stations.
When the ROTARY ENCODER is pressed, switches in the following order:
ON  OFF
• The setting can only be changed in
RADIO mode.
•IPOD DIRECT:A menu for turning on or off iPod direct control (in iPod mode). If you select ON, you can control iPod operations on the iPod, and you can control only the vol-ume of iPod from this unit. If you select OFF, you can control iPod operations from this unit. When the ROTARY ENCODER is pressed, switches in the following order:
OFF  ON
• The setting can only be changed in
iPod mode.
AUDIO BOOK:You can change the iPod Audiobook playback speed.
Pressing the ROTARY ENCODER repeatedly switches the setting in the following order:
NORMAL  FASTER  SLOWER
• The speed can only be changed in
iPod mode.
• While IPOD DIRECT is set to ON, the
speed cannot be changed.
NOTICE
iPod (5th generation) and iPod
nano (1st generation) do not
support iPod direct control.

11
11

BLUETOOTH
If you select BLUETOOTH, you can make the settings for connecting and controlling Bluetooth devices.To select the following setting options, turn the ROTARY ENCODER clockwise or counterclockwise and press the ROTARY ENCODER. Refer to page 38 “Bluetooth Settings.”
BT PAIRING  LIST PHONE  LIST
AUDIO  SET PASSKEY  BT POWER
ON/BT POWER OFF  BT INFO 
DISPLAY ON/DISPLAY OFF  INITIALIZE
BT PAIRING:You can connect your Bluetooth devices.
LIST PHONE:You can connect or disconnect a reg-istered Bluetooth- compatible mobile phone, or delete it from the list.
LIST AUDIO:You can connect or disconnect a reg-istered Bluetooth device, delete the device from the list, and select the connection method.
SET PASSKEY:You can set the passkey.
BT POWER ON/BT POWER OFF:You can select whether or not to auto-matically connect a Bluetooth device when the ignition switch is set to ON.
BT INFO:You can check the name and address of this unit.
•DISPLAY ON/DISPLAY OFF:You can select whether or not to dis-play the connection confirmation when a Bluetooth device is connected by setting the ignition switch to ON.
INITIALIZE:You can initialize certain setting infor-mation or all settings.
PHONE
If you select PHONE, you can edit the phonebook, set the ring tone or transfer the call histories.To select the following items, turn the ROTARY ENCODER clockwise or counterclockwise and press the ROTARY ENCODER.
PHONE BOOK  SET HF SOUND  SEND
HISTORYPHONE BOOK:You can edit the phonebook in this unit.
SET HF SOUND:When a mobile phone is connected, you can select the ring tone and adjust the volume of the call tone and ring tone.
SEND HISTORY:You can transfer the call histories on the connected mobile phone to this unit.
When the ROTARY ENCODER is pressed, switches in the following order:
YES  NO
•
3 BACKPress the BACK button to exit from the menu.Press and hold the BACK button to exit from a list that was displayed by pressing the LIST button.

13
13

4 ROTARY ENCODER (SELECT
LIST)Turn the ROTARY ENCODER clockwise or counterclockwise to select a station. Press the ROTARY ENCODER to set the station. If you press and hold the ROTARY ENCODER in the center until you hear a beep, the currently tuned sta-tion is stored as a preset channel in the preset channel list.
5 RIGHT (TUNE )Press to manually select (one step at a time) the station with the next higher frequency. Press and hold to fast-forward to a higher frequency.
6 UP (TUNE )Press to select the next higher sta-tion.Press and hold to continue searching for a higher frequency station.
7 LEFT (TUNE )Press to manually select (one step at a time) the station with the next lower frequency. Press and hold to fast-forward to a lower frequency.
8 DOWN (TUNE )Press to select the next lower station.Press and hold to continue searching for a lower frequency station.
9 PRESET 1-6Press to recall previously stored sta-tions (Preset Channels).Press and hold until you hear a beep, and the station you are cur-rently tuned to is stored as a Preset Channel.
NOTICE
You can store up to 6 stations
per band.
a SCANIf you press, is indicated in the display. The tuner begins searching for stations with good reception and you can listen to each channel for 5 seconds.

17
17

1 DISCSwitches to the CD mode. (Only effective if a disc is loaded.)
2 h (EJECT)Press to eject the disc.
3 LISTPress to display a CD List.Use the ROTARY ENCODER to select a CD from the list.
4 ROTARY ENCODER (SELECT
LIST)Turn the ROTARY ENCODER clock-wise or counterclockwise to select the desired title. Press the ROTARY ENCODER in the center to start play-back.
• No CD List is displayed when play-ing back a CD containing no text information.
5 UP/DOWN (SELECT LIST)Press to select the desired title.
6 RIGHT (TRACK )Press to proceed to the next track. Press and hold until you hear a beep. Playing of the track is fast forwarded. ( There is sound.)
7 LEFT (TRACK )Press to takes you back to the start of the track currently playing. Press to return to the previous track once more.Press and hold until you hear a beep. Playing of the track is reversed. ( There is sound.)
8 PRESET1 (PLAY/PAUSE)To pause the CD, press PRESET 1 while the CD is playing. Press again to resume playing.
9 PRESET5 (Random)If you press this, and is indicated in the display. This unit starts to play tracks on the disc being played in random order. Press again to cancel.
a PRESET6 (Repeat)If you press this, and is indi-cated in the display. This unit starts to repeat the track being played. Press again to cancel.
b SCANIf you press this, and is indi-cated in the display. This unit starts to play the first 10 seconds of each track on the CD being played. Press again to cancel.
c TEXTPress, and display indications change as follows ( TEX T CD only):
Upper: Artist NameLower: Track Title Track TitleELAPSED TIME
Disc Title Track Title
When d is displayed, if you press and hold until you hear a beep, the display will changes. A maximum of 2 pages (24 characters) can be dis-played.
CAUTION
Compact disc players use an
invisible laser beam which
could cause hazardous radiation
exposure if directed outside
the unit. Be sure to operate the
player correctly.

35
35

3 ROTARY ENCODER (SELECT
LIST)Turn the ROTARY ENCODER clock-wise or counterclockwise to select the desired channel. Broadcast will start by pressing. If you press and hold until you hear a beep, the cur-rently tuned station is stored as a preset channel in the preset channel list.
4 RIGHT (TUNE )Press to select the next higher chan-
nel.If you press and hold, you can rapidly scroll forward through the channels.While displaying Channel Category by T YPE UP/DOWN, you can select the next channel forward within the currently selected type (Channel Category) by pressing.
5 LEFT (TUNE )Press to select the previous channel.If you press and hold, you can rapidly scroll down through the channels.While displaying Channel Category by T YPE UP/DOWN, you can select the previous channel within the currently selected type (Channel Category) by pressing the ROTARY ENCODER to the left.
6 UP (TYPE )Press to see the Channel Category of the channel that is currently received.When Channel Category is dis-played, press again to switch to the next category.
7 DOWN (TYPE )Press to see Channel Category of channel that is currently received.When Channel Category is dis-played, press again to switch to the previous category.
8 PRESET1-6Press to recall previously stored channels (Preset Channels).Press and hold until you hear a beep, and the channel you are currently receiving will be stored as a Preset Channel.
NOTICE
You can store up to 6 channels
per band.
9 SCANIf you press, is indicated in the display. SCAN of the currently selected type (Channel Category) starts and the tuner begins search-ing for stations with good reception. You can listen to each channel for 5 seconds.
a TEXTPress this button and the indications in the display changes as follows:
Lower: Artist NameUpper: Song Title Channel NameSong Title
NOTICE
About the Display
Up to a maximum of 10
alphanumeric characters can be
displayed.
(Some information will not be
fully displayed.)